Professional Documents
Culture Documents
Beamst RB8
Beamst RB8
Date: SH of
Checked By:
Date
Program for the Design of Steel Beams (Standard Rolled Sections as per IS 808 & Built up Beams
with equal Flanges on Top and Bottom),
Either Bending Moments & Shear Force Values can be calculated manually and feeded or Bending Moment
Calculations Sheet can be used and the output in Column D substituted in the indicated places.
**Self weight of the beam is directly taken into account while designing.
INPUT DATA
Automatic
Calc.
Beam No. (If any) RB7/RB13/RB37/RB43
Bending Moment (X-X)(KN-m) = 4.5 4.5
Bending Moment (Y-Y)(KN-m) = 0 Values from Bending moment
Shear Force (KN) = 3 3 Calculations Sheet.
Span of the Beam (m)= 6 6
Effective Length (m) = 2
Whether Flange Plates are to be
Provided (Yes or no) NO
(If Yes, Provide Flange Plate
Dimensions to be used)
Flange Plate Width (mm) = 0
Flange Plate Thickness (mm) = 0
OUTPUT DATA
ISMB SECTIONS
ISMC SECTIONS
665272226.xls
Input Data Output Data
Span of the Beam (m)= 6
Maximum Shear Force (KN)= 3
Uniformly Distributed Load
Maximum Bending Moment (Kn-m)= 4.5
Intensity of Loading (KN/m)= 1
Point Loads
3 3 0.855 1.62 2.295 2.88 3.375 3.78 4.095 4.32 4.455 4.5 4.455
Point Loads
Load 1 0 0 0 0 0 0 0 0 0 0 0 0 0
Load 2 0 0 0 0 0 0 0 0 0 0 0 0 0
Load 3 0 0 0 0 0 0 0 0 0 0 0 0 0
Load 4 0 0 0 0 0 0 0 0 0 0 0 0 0
Load 5 0 0 0 0 0 0 0 0 0 0 0 0 0
Load 6 0 0 0 0 0 0 0 0 0 0 0 0 0
Load 7 0 0 0 0 0 0 0 0 0 0 0 0 0
Load 8 0 0 0 0 0 0 0 0 0 0 0 0 0
Load 9 0 0 0 0 0 0 0 0 0 0 0 0 0
Load 10 0 0 0 0 0 0 0 0 0 0 0 0 0
Load 1 0 0 0 0 0 0 0 0 0 0 0 0 0
Load 2 0 0 0 0 0 0 0 0 0 0 0 0 0
Load 3 0 0 0 0 0 0 0 0 0 0 0 0 0
Load 4 0 0 0 0 0 0 0 0 0 0 0 0 0
Load 5 0 0 0 0 0 0 0 0 0 0 0 0 0
665272226.xls