Professional Documents
Culture Documents
No.1 PVC Solvent Cement (MSDS)
No.1 PVC Solvent Cement (MSDS)
i) Product Information:-
3. HAZARDS INFORMATION
i) Ingestion: May cause irritation, nausea, vomiting, diarrhea and kidney or liver disorders.
ii) Skin Contact: May cause sensitization
iii) Eye Contact: May irritate eyes
iv) Inhalation: May cause mild respiratory irritation.
v) Chronic Exposure: May cause damage to the central nervous system. Prolonged or repeated skin contact may cause
drying or cracking of the skin.
4. FIRST-AID MEASURES
i) In case of ingestion: Do not induce vomiting. Rinse mouth with water. Get immediate medical attention.
ii) In case of skin contact: Remove contaminated clothing immediately. Wash all exposed areas with soap and
water. Get medical attention if irritation develops.
iii) In case of eyes contact: Flush eyes immediately with water for 15 minutes. If irritation persists, seek medical
attention.
iv) In case of inhalation: Remove to fresh air. If breathing becomes difficult, administer oxygen.
Page 1 of 4
MATERIAL SAFETY DATA SHEET
i) Suitable extinguishing media: Foam, CO2, dry chemical powder, water fog, sand or earth.
ii) Unsuitable extinguishing media: Do not use water in a jet.
iii) Hazardous decomposition: Carbon monoxide, carbon dioxide and hydrogen chloride.
Remove all sources of ignition and ventilate area. Stop leak if it can be done without risk. Soak up spill with an inert absorbent
such as sand, earth or other non-combustibing material. Put absorbent material in covered, labeled metal containers. Prevent
liquid from entering watercourses, sewers and natural waterways.
i) Handling: Avoid contact with eyes, skin and clothing. Avoid breathing vapours or mists. Use with adequate
ventilation. Keep product away from heat, sparks, flames and all other sources of ignition.
ii) Storage: Store in a cool, dry, well-ventilated area away from incompatible materials. Keep containers closed
when not in use.
i) Form: Liquid
ii) Specify gravity: 0.80 - 0.90 g/ml
iii) Colour: Clear
iv) Viscosity: 200 - 300 cP
v) Odour: Ketone odour.
vi) Solubility in water: Insoluble
vii) Boiling point: N/A
viii) Flash point: N/A
ix) Ignition temperature: N/A
Note:- Above information is not used for preparing specification of the material.
Page 2 of 4
MATERIAL SAFETY DATA SHEET
This product is not expected to be toxic to aquatic organisms. This product emits VOC in its use.
WHMIS Classification: Class B Div. 2 Flammable Liquid Class D Div. 2B Toxic Material.
Page 3 of 4
MATERIAL SAFETY DATA SHEET
The information given above is true and is based on our own study and research work and experience. EASY-FIX Chemicals
Industry does not provide warranty or guarantee for the products made at defferent conditions for which are beyond our control.
All seperate trial cases should be studied and tested to obtain own parameter before any order and delivery.
Page 4 of 4