Professional Documents
Culture Documents
Quickguide For Cloth Door Panel 1
Quickguide For Cloth Door Panel 1
Quickguide For Cloth Door Panel 1
QG200 rev-2014-04-28
QuickGuide Cloth Door Panel
Step 1: Secure the door Step 4: Assemble the corners
● Select a doorway, between 29” to 44” (74cm to ● Slide the corners together until they snap into position.
112cm) in width, and 53” ● Loosen all four black knobs to allow the frame
to 97” (134cm to 247cm) sections to be resized.
in height.
For large frames, width 1 2
must be 32” to 51” (81cm to
130cm) and height 59” to 2
109” (150cm to 277cm).
1
● The door must be
held open securely
during testing.
6
on each section.
2
1 2
2 1
1
6 6 5 5
3
5 5
3 4
4 3
4
4 3 Tip: Fit the frame so that it is tight enough to remain standing
in the doorway, but can be removed with a slight pull.
Page 2 of 3
QuickGuide Cloth Door Panel
Step 6: Attach the cloth panel Step 8: Engage cam levers
● Unfold the cloth panel and drape it over the frame. ● Engage all cam levers to lock the frame into the
● Attach the bottom Velcro tabs first, evenly along doorway.
the bottom of the frame. ● Tug on the frame to ensure a tight fit.
Tip: Setting the frame on its side, or flat on the floor, will
make it easier to attach the cloth panel. Make sure the
black knobs and cams are still accessible once the panel
is attached.
gauge placement
Page 3 of 3