KCPL 944 is a high molecular weight hindered amine light stabilizer that provides excellent light stability to thin articles like fibers and films. It has high compatibility, resistance to extraction, and low volatility. KCPL 944 is suitable for polymers like PP, HDPE, LDPE, LLDPE, ABS, and PVC. It is FDA approved for use in food packaging at a maximum concentration of 0.3%. Unlike UV absorbers, KCPL 944 is effective regardless of the polymer thickness, making it particularly suitable for high surface area articles like coatings, fibers, films and tapes.
KCPL 944 is a high molecular weight hindered amine light stabilizer that provides excellent light stability to thin articles like fibers and films. It has high compatibility, resistance to extraction, and low volatility. KCPL 944 is suitable for polymers like PP, HDPE, LDPE, LLDPE, ABS, and PVC. It is FDA approved for use in food packaging at a maximum concentration of 0.3%. Unlike UV absorbers, KCPL 944 is effective regardless of the polymer thickness, making it particularly suitable for high surface area articles like coatings, fibers, films and tapes.
KCPL 944 is a high molecular weight hindered amine light stabilizer that provides excellent light stability to thin articles like fibers and films. It has high compatibility, resistance to extraction, and low volatility. KCPL 944 is suitable for polymers like PP, HDPE, LDPE, LLDPE, ABS, and PVC. It is FDA approved for use in food packaging at a maximum concentration of 0.3%. Unlike UV absorbers, KCPL 944 is effective regardless of the polymer thickness, making it particularly suitable for high surface area articles like coatings, fibers, films and tapes.
CAS Number:71878-19-8 Structure: TYPICAL PROPERTIES VALUE Color White to off-white Appearance powder Melting Point 100-135℃ Molecular weight 2000-3100 KCPL 944 is a high molecular weight Density 1.01 g/cm3 (20 °C) hindered amine light stabilizer (HALS). It shows Volatile matter ≤1.0 % excellent compatibility, high resistance to Ash <0.1% extraction and low volatility. Transmittance 90%min@425nm 93%min@450nm PERFORMANCE BENEFITS Solubility (20°C) g/100 g solution Water <0.01 KCPL 944 imparts excellent light stability to thin Acetone >50 articles, particularly fibers and films. In thick Chloroform >30 cross sections it is specifically suitable for Ethanol <0.1 polyethylene articles. In addition its use is Ethyl acetate >50 recommended for applications requiring indirect n-Hexane 41 food contact approval. Methanol 3 Methylene Chloride >50 SUGGESTED APPLICATIONS Toluene >50 KCPL 944 is suitable for those application which demand particularly high stability for such STORAGE polymers as PP, HDPE, LDPE, LLDPE, ABS In accordance with good industrial practice, and PVC. It is FDA-cleared for use in food handle with care. Avoid continuous or respective packaging applications including PP and PE breathing of dust. Use only with adequate with maximum concentration of 0.3%. ventilation. Avoid dust formation and ignition In contrast to UV absorbers, it is effectiveness is sources. independent of the polymer’s thickness. So, It is particularly effective in articles with high specific Refer to the Material Safety Data Sheet (MSDS) surface such as coating, fiber, films and tapes. for safety, health and environment information.
HEALTH AND SAFETY Shipping Container:
Direct contact with this material may cause eyes 25kg carton box (inner with plastic bag) or and respiratory system irritation. Very toxic by according to customer’s request. inhalation.