The document contains a technical drawing of a cylindrical part with dimensional specifications and tolerances. It lists a 45 degree chamfer with a depth of 5mm on one end, overall diameter measurements of 28.5mm with a tolerance of +/- 0.02, a radius of 28mm on the other end, and that the material is EN31 steel at 58-60 HRC hardness.
The document contains a technical drawing of a cylindrical part with dimensional specifications and tolerances. It lists a 45 degree chamfer with a depth of 5mm on one end, overall diameter measurements of 28.5mm with a tolerance of +/- 0.02, a radius of 28mm on the other end, and that the material is EN31 steel at 58-60 HRC hardness.
The document contains a technical drawing of a cylindrical part with dimensional specifications and tolerances. It lists a 45 degree chamfer with a depth of 5mm on one end, overall diameter measurements of 28.5mm with a tolerance of +/- 0.02, a radius of 28mm on the other end, and that the material is EN31 steel at 58-60 HRC hardness.
The document contains a technical drawing of a cylindrical part with dimensional specifications and tolerances. It lists a 45 degree chamfer with a depth of 5mm on one end, overall diameter measurements of 28.5mm with a tolerance of +/- 0.02, a radius of 28mm on the other end, and that the material is EN31 steel at 58-60 HRC hardness.
R2 8 19,8 190 MATERIAL : EN 31 ( 58-60 HRC) 1)ALL PARTS ARE SHOULD BE PROPERLY GRIND AFTER HEATTREATMENT. 05.12.2009 2) UNLESS OTHERWISE STATED THE TOLERANCE SHOULD BE +/- 0.02 H.R.STEEL INDUSTRIES STROKER (S2 M/C) 261 G.T.Road(N), Salkia. Raw material size :30mm dia Howrah x 195 mm length