Geoup At. — ConSohitatron
Results sheet 2
y
Samele descinion res emlyni cea
Moisture content Tin Number =
Mass of Tin + Wet Soil
Mass of Tin + Dry Soil =
Mass of Tin= =
‘Moisture Content, % =
‘Wass ofring + wet soll before test
Mass of ring + wet soil after test =
[Mase ofring #dryect tests
Mass of ring =
[Initial MiC% = | I Final MIC % =
Mass of dried specimen, Ma, Kg =
‘Specific Gravity of soil arficles, Ge 26
Cross sectional area of sample, A, m? or mm? P54 Diet ETS
Ms mor mm |
~GpA
Initial Thickness of soil sample, Hi, m Fie
Density of Water, pw, kg/m’ 7000
Calculation of Void ratio = ae
Pressure | Total Deflection, | _ Thickness of Height of Void Ratio,
(kN?) AH (mm) | sample at end of voids, Hu/Hs
test, | Hy = HeHe(mm)
HH: - AH (mm)
{
Calculation of Coefficient of Consolidation - _
Pressure | Average length vin too, (min)
Increment | of Drainage Path
(ein) mm@/minuteSIMO: Gep 1. GnselinxTans SHEET
10-1 €ATIO * mastee CPS
Results Sheet 1
Dial Gauge Readings
| Load Cycle 1 Load Cycle 2 Load Cycle 3 Load Cycle 4
Load gn hanger | Load on hanger | Load on hanger | Load on hanger
= LS aSi5 |= 2-Se: = Se = 06
+ 00 x -
Cc "06
ul 2
71d ry +
1S of 0. Ss
1S
STa
ae
}
ail Ss.
4 3
3
=
rr}