Professional Documents
Culture Documents
Ce3 1 RCD Tbeam Final
Ce3 1 RCD Tbeam Final
Ce3 1 RCD Tbeam Final
NSCP 2015
LEGEND
Pu INPUT /SELECT VALUE
a b
COMPUTED VALUE
DECISION
Wu
Ma Mb LOADINGS
L Service Dead Load=
Ra Rb Service Live Load=
50 kN Factored Load=
3m 2m
156 kN/m
Beam Span, L=
349.00 361.00 a=
b=
407.60 422.40
5m
COMPUTED MAXIMUM M
x= 2.6128 m Mmax(-)=
Mmax(+)=
DESIGN OF SINGLY REINFORCED T- BEAMS
BE
s: bf= 820 mm, bw=300
. It carries a uniformly
Mu (kN-m) 183.49
ncentrated factored load fc' (MPa) 27
late the required Tension fy (MPa) 415
B1 0.85
Ø 0.65
LOADINGS Assumption/s:
50 kN-m
60 kN-m Ø
50 kN Depth of Compression Block (a)
Depth of Neutral Axis (c)
Tensional Stress of Steel (fs)
5 m
3 m Therefore:
2 m ADAPT :
As
TED MAXIMUM MOMENTS Diameter of Reinforcement Bars
361.00 kN-m Number of Bars
183.49 kN-m Number of Bars
- BEAMS
BEAM INFORMATION
Steel Yields
415 MPa
BEAM INFORMATION
1.) Select the Year of the Code to be used. The available codes are 2001 and 2015 respectively.
2.) Input all the values inside the blue-shaded cells. Yellow shaded cells are computed
automatically. Double check the values being typed inside the cells for more accurate answer.
Use the legend below as a guide.
3.) The program will automatically compute the Ultimate moment to be resisted by the
designed beam.
4.) The Beam Compression Block Analysis dictates how the analysis was made. It tells us if
the beam's compression block is greater or lesser than the thickness of the Flange.
6.) The program is not suitable for problems with both tension and compression steel did not
yield. The program is applicable for either of the two steels yielded, or either of them did not
yield.
1.999788E+13
### 1292622783788
791447043227
Asfy 2124344.952
S
A 11740.625 11740.625
B -1684341.339 3694512.961
C -27369555.2 1660422643
b2 2.837006E+12 1.364943E+13
4ac -1.285343E+12 7.79776E+13
2a 23481.25 23481.25
Cs 246135.9304
Asfy 2124344.952
NSCP OPTIONS
2001 a<tf Tension Controlled
2015 a>tf Compression Controlled