Professional Documents
Culture Documents
Eg Unit 3 QP
Eg Unit 3 QP
Eg Unit 3 QP
Question Bank
Subject:GE3251 - Engineering Graphics
Unit-3
Course Coutcomes (COs)
CO 1 Exposed to existing national standards related to technical drawings
CO 2 Understand the given Engineering drawing and interpret a three dimensional drawing
Apply the fundamentals and standards in engineering drawing through drafting exercises of geometrical
CO 3
solids
Apply the fundamentals and standards in engineering drawing through drafting exercises of geometrical
CO 4
solids
CO 5 Analyze the three dimensional view of objects as perceived by the human eye
CL-Cognitive Level; Kn-Knowledge;Un-Understand;Ap-Apply;An-Analyze;Ev-Evaluate;Cr-Create;
Q.
Question MarksCL CO
No.
Part-A
A hexagonal prism of base side 30 mm axis length 60 mm is resting on HP on one of its base
1 20 Ap CO3
sides with its axis inclined at 40° to HP and parallel to VP. Draw its projections
1 of 5 05-11-2022, 17:13
Firefox http://192.168.0.1/5staff/question/qbankivud.jsp?select=1&part=1&ord...
A pentagonal prism of base side 30 mm and axis length 60 mm is resting on HP on one of its
9 base corners with its axis inclined at 40° to HP and parallel to VP. Draw its projections when 20 Ap CO3
the base sides containing the resting corner are equally inclined to HP.
A right pentagonal pyramid side of base 30 mm and altitude 60 mm rests on one of its edges
10 of the base in HP, the base being lifted up until the highest corner in it is 40 mm above 20 Ap CO3
HP. Draw its projections when the edge on which it rests is made perpendicular to VP.
A hexagonal prism of base side 30 mm and axis length 60 mm is resting on HP on one of
11 its base corners with a solid diagonal through that corner is perpendicular to HP. Draw its 20 Ap CO3
projections and print the length of the diagonal.
A pentagonal prism of base side 30 mm and axis length 60 mm is resting on HP on one of its
12 20 Ap CO3
rectangular faces with its axis is inclined at 40° to VP. Draw its projections.
A square prism of base side 30 mm and axis length 60 mm is resting on HP on one of its
13 longer edges with its axis inclined at 35° to VP. One of the faces containing the resting longer 20 Ap CO3
edge is inclined at 25° to HP. Draw its projections.
Draw the projections of a cube of 40 mm edge resting on the HP on one of its corners with
18 20 Ap CO3
a solid diagonal vertical.
Draw the three views of the object shown in figure choosing the most important side as the
front.
19 20 Ap CO3
2 of 5 05-11-2022, 17:13
Firefox http://192.168.0.1/5staff/question/qbankivud.jsp?select=1&part=1&ord...
Draw the Front view, top view and left side view of the solid bearing block shown in
figure.
20 20 Ap CO3
Draw the front view, top view and left-side view of the object shown in fig.
21 20 Ap CO3
3 of 5 05-11-2022, 17:13
Firefox http://192.168.0.1/5staff/question/qbankivud.jsp?select=1&part=1&ord...
Draw the front view, top view and right-side view of the object shown in fig.
22 1 Ap CO3
Draw the front view, top view and right-side view of the object shown in fig.
23 20 Ap CO3
4 of 5 05-11-2022, 17:13
Firefox http://192.168.0.1/5staff/question/qbankivud.jsp?select=1&part=1&ord...
5 of 5 05-11-2022, 17:13