Professional Documents
Culture Documents
ABSTRACT
ABSTRACT
ABSTRACT:
Human life is more valuable than anything else, timely help is more
important than leading a helping hand. This project is one among those which is
designed in a way to save human lives in a timely manner. There are two main
modules discussed in the project. Here Temperature sensor is used when the car
engine gets heat that will indicate to the controller. When there is any gas leakage
that will also indicate to the controller and that will also displays in the LCD. And
when we press the break the car speed gets controlled and when we press the
switch when break will not work and the car speed gets increased rapidly and all
the information is passed through LIFI module that transmit the information to the
solar panel in the receiver side. And the break in other side of the car gets activated
and stops the car when there are abnormalities in the front moving vehicle.
Switches are used to give the direction of the car. All the information should be
displayed in the LCD module.
EXISTING SYSTEM:
In existing system the information is passed only through warlike talkie after
the arrival of the police to the spot.
And also no other new technology to transmit the data and source of the
accident.
Here we are using LIFI technology to transmit the data and stop the bak side
vehicle.
PROPOSED SYSTEM:
In proposed system, the microcontroller unit is placed inside the vehicle. The
micro controller is interfaced with speed sensor, force sensor, temperature
sensor, etc,
If speed of the car increased or and temperature changes in the car that will
be transmit through the LIFI module and the receiver in the back side
vehicle receives the information and stops the car.
Piezoelectric sensor is used to sense the vibration of the vehicle. And the
break in other side of the car gets activated and stops the car when there are
abnormalities in the front moving vehicle.
Switches are used to give the direction of the car. All the information should
be displayed in the LCD module.
BLOCK DIAGRAM:
TRANSMITTER SECTION:
POWER
LIFI
TRANSMITT
ER LCD DISPLAY
MOTOR
DRIVER
TEMPERATURE
MOTOR
SENSOR
MICRO
SWITCH1 CONTROLLER
GAS SENSOR
SWITCH2
SWITCH
SWITCH3
BREAK
SWITCH4
RECEIVER SECTION:
POWER
LCD DISPLAY
SOLAR PANEL
SWITCH1
RECEIVER SWITCH2
MODULE MICRO
CONTROLLER SWITCH3
MOTOR
DRIVER SWITCH4
MOTOR SWITCH
BREAK
HARDWARE REQUUIREMENTS:
MICRO CONTROLLER
LCD DISPLAY
POWER SUPPLY
GAS SENSOR
TEMPERATURE SENSOR
LIFI
MOTOR DRIVER
MOTOR
SOFTWARE REQUUIREMENTS:
EMBEDDED C
MP LAB