Professional Documents
Culture Documents
Pulsar Analogue Quartz Watch With Alarm Chronograph Timer: Modes and Displays C A L - N 9 4 4, N 9 4 5 Features
Pulsar Analogue Quartz Watch With Alarm Chronograph Timer: Modes and Displays C A L - N 9 4 4, N 9 4 5 Features
WITH ALARM CHRONOGRAPH TIMER There are two buttons and a crown as indicated in the
illustration below.
Cal. N944, N945
FEATURES
This is a multi-display analogue watch featuring alarm,
stopwatch, c o u n t d o w n t i m e r a n d d u a l t i m e f u n c t i o n s . T h e
m o d e c h a n g e s simply by turning the crown.
■ TIME
Hour, minute and 24-hour hands
■ CALENDAR
Date is indicated by date indicator.
■ ALARM
The alarm is set on a 24-hour basis.
■ STOPWATCH (CHRONOGRAPH)
It can measure up to 12 hours in 1/10 seconds.
Split time measurement is also possible.
■ COUNTDOWN TIMER
Up to 60 minutes can be set with a preset function.
■ DUAL TIME
The time of a different time zone can be displayed on a 24-hour
bas is .
The mode changes by turning the crown at normal position In each mode the hands perform the following functions.
clockwise or counterclockwise, and the mode indicator
shows the mode selected. The hands move and perform
different functions in each mode.
MODE INDICATOR
3. Push the crown back in to the normal position to start the Both indicate the 1st of the month.
watch.
• Turn the crown to set the mode indicator to either “TIME” or DUAL TIME
“TIME • ) ) ) ”.
The hands move to indicate the time and calendar set previously. • Turn the crown to set the mode indicator to either “TIME” or
“TIME• ) ) ) ”.
1. Pull out the crown to the first click. The hands move to indicate the time, calendar and dual time set
previously.
2. Press “A” or “B” repeatedly but separately to set the calendar.
* Be sure to set the date indicator (forked tip of the center
hand) to the desired date printed on the dial.
* The hands move quickly if the button is kept pressed.
* Disregard the movement of the stopwatch 1/10 second hand
at the 12 o’clock position.
3. Push the crown back in to the normal position.
* While the crown is kept at the first click, the hands stop, and
when the crown is pushed back to the normal position, the
hands move and catch up with the current time.
Stopwatch
minute, hour
and 24-hour COUNTDOWN TIMER
hands
• The countdown timer indicates the time remaining of the time
Normal movement period set previously. It can be set to count down from 1 to 60
minutes in one-minute increments. The remaining time is displayed
Swing motion in one-second increments.
• Once the countdown time is set, it can be used repeatedly as
Stop at the 12 o’clock position preset time.
Timer setting 1. If the timer has been set previously, press “B”.
• Turn the crown to set the mode indicator to “TIMER”. The minute hand moves to indicate the time set previously.
The hour, minute, 1/10 second and timer second hands return 2. If you want to change the set time, or the timer has not been
to the 12 o’clock position. Disregard the 24-hour and dual time set previously, pull out the crown to the second click.
hands. 3. Press “A” for clockwise setting of the minute hand or “B” for
counterclockwise setting.
Ex.) 40 minutes is set for Ex.) The remaining time is 21 * With each press of the button, the hand moves one minute.
countdown. minutes and 43 seconds. * The hand moves quickly if the button is kept pressed.
4. Push the crown back in to the normal position.
Timer operation