P027 Bull

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 8

PO27 Seri es PO27 S e r i e s

LOW COST PRESSURE TRANSDUCER

F E AT U R E S

• Gage, Sealed Gage or Absolute


Pressure Reference

• Integral Male or Female Pressure


Connection

• Rugged Stainless Steel Construction

• 0-50 thru 0-10,000 psi Pressure Ranges


(low end range varies with model)

• 0-5 VDC, 1-5 VDC, 3mV/V or 4-20 mA


Output, 2, 3 or 4-wire Integral Circuitry

• 1.03” Diameter

����� �������
PO27 Seri es PO27 S e r i e s

overview features

The P027 Series pressure transducer is designed for general • Reliable bonded foil strain
purpose applications requiring high reliability and durability, but gage technology
at an economical cost.
• Gage, sealed gage or absolute
pressure reference

• Compact size

• 0-5 VDC, 1-5 VDC, 3 mV/V, or


4-20 mA output 2, 3 or 4-wire
integral circuitry

2 T R A N S M E T R I C S , D I V I S I O N O F U N I T E D E L E C T R I C C O N T R O L S

Uncontrolled if printed
PO27 Series

Applications

• Process control of hydraulic


pressures
• Stamping presses
• Lab analyzers
• Hydraulic hammers
• Off road vehicles

technology

The P027 Series features bonded foil strain gage


technology, considered one of the most durable
and abuse resistant technologies available today.
The bonded foil strain gage transducer measures
pressure when fluid is introduced into a simple low
volume chamber (port), where it acts against the
diaphragm. Proportional to the applied pressure,
the resistance change is conditioned by internal
circuit devices to produce the transducer’s output.

T R A N S M E T R I C S , D I V I S I O N O F U N I T E D E L E C T R I C C O N T R O L S 3

Uncontrolled if printed
PO27 Seri es PO27 S e r i e s

specifications

MODEL: P027

PRESSURE RANGE: 0-50 thru 0-10,000 psi (Type C, D, E)


0-150 thru 0-10,000 psi (Type M)
0-50 thru 0-10,000 psi (Type T)

OUTPUT RANGE: 1-5 or 1-6 VDC ±2% (Type D)


0-5 VDC ±2% (Type C, E)
3 mV/V nominal (Type M)*
4-20 mA ±2% (Type T)

ZERO BALANCE: ±3.0% FSO

STATIC ERROR BAND: ±0.25% FSO (>2,000 psi)


(BSL - Nonlinearity, Hysteresis, ±0.50% FSO (>100 thru <=2,000 psi)
and Nonrepeatability combined) ±1.0% FSO (<= 100 psi)

NONREPEATABILITY: ±0.1% FSO (±0.2% - T)

THERMAL EFFECTS: ±0.03% FSO/°F >100 psi (Type C, D, E, M)


±0.06% FSO/°C
±0.04% FSO/°F <=100 psi (Type T)
±0.08% FSO/°C

OPERATING TEMPERATURE -30°F to 180°F (Type C, D, E, T)


RANGE: -35°C to 80°C
-100°F to 250°F (Type M)
-70°C to 125°C

COMPENSATED
TEMPERATURE RANGE: 0°F to 160°F
-20°C to 70°C

*Reduced output in ranges <500 psi

4 T R A N S M E T R I C S , D I V I S I O N O F U N I T E D E L E C T R I C C O N T R O L S

Uncontrolled if printed
PO27 Series

EXCITATION: 10.5 to 28 VDC (Type C, D, E)


5 to 18 VDC or VAC (Type M)
9 to 40 VDC at the transmitter (Type T)

Important Note: T type circuit 4-20mA has


an over-scale limit of 34mA

CURRENT CONSUMPTION:
(Typical) 28 mA (Type C, D, E)
Vexc/350 ohms (Type M)
4-20 mA (Type T)

RISE TIME: (10-90%) Less than 1 ms typical

PROOF PRESSURE: 1.5 times rated pressure or 20,000 psi, whichever is less

BURST PRESSURE: 2 times rated pressure or 25,000 psi, whichever is less

MATERIAL: (sensor/housing) 15-5 and/or 17-4 PH S.S. / 300 series S.S.

WEIGHT: Approximately 3 oz. or 85 g

IDENTIFICATION: Model, range, serial #, connections, manufacturer, & country of origin


are inscribed on the case

T R A N S M E T R I C S , D I V I S I O N O F U N I T E D E L E C T R I C C O N T R O L S 5

Uncontrolled if printed
PO27 Seri es PO27 S e r i e s

model chart
The chart below will assist you in selecting a transducer configuration.

����������������� ����������������������������
� ������ � ������������������������������
���� ���� �������������������������� ��� ������������������������������������
� ������������ ��� �������������
� ������������������������������ ��� ������������
� ��������������������� ��������������� ��� �����������������������������������
� ������������������������������ ��� ������������
� ���������������������������������� ��� ��������������������������������
� ��������������������������������������������� ��� ������������������������
� ������������������������������

� ������������������� �������������������
� ���������� �����������������
�������
� ��������������
� ����������������������������������������� ���� ������������������������
� ����������������������������� ����� ��� ����������������������������������
� ����������������� ���� ����������������������������
� ���������������
� ���������������������������������
� ���������������
��� ����������������������
� ���������������
��� ��������������������
� ����������������� �����

���������≤���������������

� ��������������� ��� �����������������������


� ���������������� � ��� ����� �������������� � ��
� ����������������������������
� ����� ���������������
� �������������������������
� ������������������
� ��������������������� ���� ������������������������������ ��������
� ����������������������������������������� �������� ���������������������
� ������������������������������������������ ���������������������������������
�������
���������������������
� ������������������������

� ���������������������������

� ����������������������������������
� ���������������������������������������

� ��������������������������� ������

������ �����������������������������������������
���������������������

6 T R A N S M E T R I C S , D I V I S I O N O F U N I T E D E L E C T R I C C O N T R O L S

Uncontrolled if printed
PO27 Series

how to order

Trans Metrics’ P027 Series model numbers are constructed as a series of numbers and letters that identify the accuracy,
electrical circuit, pressure connection, electrical connection, and any options or features which may be unique to a
particular pressure transducer. The model number below features 1 a P027 series pressure transducer with E type
circuitry, 2 0-5 VDC output, 3 7/16-20 female thread and 4 a PTIH-10-6P electrical connection. Any other
options selected 5 would be assigned a three (3) digit number which would be added to the end of the model
number. Pressure selections should be specified including the 6 pressure range, 7 units and 8 pressure
reference.

Example:
��������������������� ���������������������
Model P027 E G A 178 Range 3000 psi g
1 2 3 4 5 6 7 8

Series/ Circuit Pressure Electrical Options Pressure Units Pressure


Accuracy �������
Type Connection Connection Range Reference
������

��������
������
������
������
���������
circuit & dimensional
������� drawings
������

���������
��������������������

���� ��
����� ��
������
����������������� �����������
���������������������
����
�� �� ���������������������

�������

�������������
�������������������������������
����
�������
����
������
����� ������
������ ������
����������������� ����������

������ ������� ��������


���� ���� ������
������
��������������������
������
���������
�������
������������ ������
���������������������
����
���� �����
��� ������
����

����������������� ����������
�������
*1.67” on T Circuit
����������
������� �������
����

���������
��������������������

���� ��
����� ��
������
����������������� �����������
����
�� ��

�������

�������������
�������������������������������
����
���� �����
������ ������
T R A N S M E T R I C S , D I V I S I O N O F U N I T E D E L E C T R I C C O N T R������
O L S 7
����������������� ����������

������ �������
Uncontrolled
���� ���� if printed
RECOMMENDED PRACTICES AND WARNINGS INTERNATIONAL OFFICES U.S. SALES OFFICES
Trans Metrics recommends careful consideration of the following
factors when specifying and installing Trans Metrics pressure AUSTRALIA United Electric Controls/
units. Before installing a unit, the Installation and Maintenance United Electric Controls Headquarters
instructions provided with unit must be read and understood. (Australia) PTY Ltd 180 Dexter Ave.
Unit 2, 615 Warrigal Road Watertown, MA 02472
• To avoid damaging unit, proof pressure and max. temperature Locked Bag 600 Phone: 617-926-1000
limits stated in literature and on nameplates must never be Ashburton, Victoria FAX: 617-926-2568
exceeded, even by surges in the system. Operation of the unit up 3147, Australia www.ueonline.com
to proof pressure or max. temperature is acceptable on a limited Phone: 613-9567-0750
basis (i.e., start-up, testing) but continuous operation must be FAX: 613-9567-0755 United Electric Controls
restricted to the designated adjustable range. Excessive cycling at 32 Highland Rd.
proof pressure or maximum temperature limits could reduce BELGIUM
South Hampton, NH 03827
sensor life. United Electric Controls-Europe
Phone: 603-394-0078
G. Van Gervenstraat 19A
• A back-up unit is necessary for applications where damage to a FAX: 603-394-0175
B-9120 Beveren-Waas, Belgium
primary unit could endanger life, limb or property. A high or low Phone: 32-37554-383
limit switch is necessary for applications where dangerous FAX: 32-37552-747 United Electric Controls
runaway conditions could result. 28 N. Wise Ave.
CANADA Freeport, IL 61032
• Install unit where shock, vibration and ambient temperature United Electric Controls Phone: 815-235-3501
fluctuations will not damage unit or affect operation. Orient unit (Canada) Ltd FAX: 815-235-3847
so that moisture does not enter the enclosure via the electrical 5320 Bradco Boulevard
connection. Mississauga, Ontario United Electric Controls
• Unit must not be altered or modified after shipment. Consult L4W 1G7 Canada 1022 Vineyard Drive
Trans Metrics if modification is necessary. Phone: 905-625-5082 Conyers, GA 30013
FAX: 905-625-5709 Phone: 770-483-8400
• Monitor operation to observe warning signs of possible damage
to unit. Check unit immediately. GERMANY FAX: 770-929-8716
United Electric Controls
• Preventative maintenance and periodic testing is necessary for An Der Zentlinde 21 United Electric Controls
critical applications where damage could endanger property or D-64711 Erbach, Germany 5829 Grazing Court
personnel. Phone: 496-062-7400 Mason, OH 45040
• For all applications, a factory set unit should be tested before use. FAX: 496-062-7501 Phone: 513-398-3175
• Electrical ratings stated in literature and on nameplate must not INDIA FAX: 513-398-3076
be exceeded. Wire unit according to local and national electrical United Electric Controls
codes, using wire size recommended in installation sheet. Amar Hill, Saki Vihar Road United Electric Controls
Powai, Mumbai 400 072 19335 Hadley
• Use only factory authorized replacement parts and procedures. Stilwell, KS 66085
Phone: 91-22-857-6921
• Do not mount unit in ambient temp. exceeding published limits. FAX: 91-22-857-1707 Phone: 913-685-2775
FAX: 913-685-2774
LIMITED WARRANTY OF REPAIR AND REPLACEMENT MALAYSIA
Seller warrants that the product hereby purchased is, upon delivery, United Electric Controls, Far East United Electric Controls
free from defects in material and workmanship and that any such No. 1-2-2, 2nd Floor 1753 Beach Street
product which is found to be defective in such workmanship or Jalan 4/101C San Francisco, CA 94123
material will be repaired or replaced by Seller (F.O.B. Trans Metrics); Cheras Business Centre Phone: 415-563-5811
provided, however, that this warranty applies only to equipment Batu 5, Jalan Cheras FAX: 415-563-5909
found to be so defective within a period of 12 months from the date 56100 Kuala Lumpur, Malaysia
of manufacture by the Seller. Seller shall not be obligated under this Phone: 603-9133-4122
warranty for alleged defects which examination discloses are due to FAX: 603-9133-4155
tampering, misuse, neglect, improper storage, and in any case where MEXICO
products are disassembled by anyone other than authorized Seller’s United Electric Controls
representatives. Chihuahua 129-1 NTE
EXCEPT FOR THE LIMITED WARRANTY OF REPAIR AND Unidad Nacional 89410
REPLACEMENT STATED ABOVE, SELLER DISCLAIMS ALL Madero, TAM
WARRANTIES WHATSOEVER WITH RESPECT TO THE PRODUCT, Mexico
INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR Phone: 52-833-210-0646
FITNESS FOR ANY PARTICULAR PURPOSE. FAX: 52-833-210-5761
LIABILITY LIMITATION
SELLER’S LIABILITY TO BUYER FOR ANY LOSS OR CLAIM,
INCLUDING LIABILITY INCURRED IN CONNECTION WITH (I)
BREACH OF ANY WARRANTY WHATSOEVER EXPRESSED OR
IMPLIED, (II) A BREACH OF CONTRACT, (III) A NEGLIGENT ACT OR
ACTS (OR NEGLIGENT FAILURE TO ACT) COMMITTED BY SELLER,
OR (IV) AN ACT FOR WHICH STRICT LIABILITY WILL BE IMPUTED
TO SELLER IS LIMITED TO THE LIMITED WARRANTY OF REPAIR 5325 Naiman Parkway
AND REPLACEMENT STATED HEREIN. IN NO EVENT SHALL THE
SELLER BE LIABLE FOR ANY SPECIAL, INDIRECT, CONSEQUENTIAL ����� ������� Solon, Ohio 44139
OR OTHER DAMAGES OF A LIKE GENERAL NATURE, INCLUDING, Phone: 440-248-2229 / 888-782-2229
WITHOUT LIMITATION, LOSS OF PROFITS OR PRODUCTION, OR Fax: 440-248-7780
LOSS OR EXPENSES OF ANY NATURE INCURRED BY THE BUYER OR
ANY THIRD PARTY. www.trans-metrics.com
email: sales@trans-metrics.com
Trans Metrics specifications subject to change without notice.
EMCO50001201

You might also like