Professional Documents
Culture Documents
BSK02 1703564
BSK02 1703564
BSK02 1703564
Speaker
Robot bluetooth speakers 2.USB
3.Volume up
User manual 4.Mic
5.Push down (play/pause music;
answer/end call)
Introduction 6.Volume down
Thank you for purchasing our Bluetooth robot 7.Led
sound box of BSK02B. 8.ON/OFF
The Bluetooth robot sound box is a high
quality wireless audio device that provides Operation:
users the freedom to share music and calls
whenever you want. It functions as " wireless 1>Turn on: please dial the button to "on" and
Bluetooth speaker " when linked to Bluetooth then you can find the LED ring flashes BLUE,
phones or Bluetooth PC. also have the voice.
2>Turn off: please dial the button to "on" and
then you can find the LED ring flashes RED,
7 also have the voice.
3> Prepare your BSK02B for pairing: dial the
5 on switch in the upmost position and then
4
press the MFB buttons for about 6 seconds,
wait for the LED ring to flash red & blue,
3 6
that it is ready to pair.
8 4>Make the connection: Go to your device's
2 Bluetooth settings, when BSK02B appears
charged battery will lose its charge over time. circuits.If your device does get wet, allow it
Leaving the device in hot or cold places, such to dry completely.
as in a closed car in summer or winter · Do not use or store the device in dusty, dirty
conditions, will reduce the capacity and life areas. Its moving parts and electronic
time of the battery. components can be damaged.
Always try to keep the battery between 15℃ · Do not store the device in hot areas. High
and 25℃( 59℉ and 77℉) . A device with
temperatures can shorten the life of electr-
a hot or cold battery may not work onic devices, damage batteries, and warp
temporarily, even when the battery is fully or melt certain plastics.
charged. Battery performance is particularly
· Do not store the device in cold areas. When
limited in temperatures well below freezing.
the device returns to its normal temperature,
Do not dispose of batteries in a fire as they moisture can form inside the device and
may explode. Batteries may also explode if damage electronic circuit boards.
damaged. Dispose of batteries according to
· Do not drop, knock, or shake the device.
local regulations. Please recycle when
possible. Do not dispose as household waste. Rough handling can break internal circuit
boards and fine mechanics.
Care and maintenance · Do ot use harsh chemicals, cleaning solve-
nts, or strong detergents to clean the device.
Your device is a product of superior design
· Do not paint the device. Paint can clog the
and craftsmanship and should be treated
with care. The suggestions below will help moving parts and prevent proper operation.
you protect your warranty coverage. All of the above suggestions apply equally
·Keep all accessories and enhancements to your device, battery, charger, or any
out of the reach of small children. enhancement. If any device is not working
·Keep the device dry. Precipitation, humidity, properly, take it to the nearest authorized
and all types of liquids or moisture can service facility.
contain minerals that will corrode electronic
FCC WARNING
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.