Professional Documents
Culture Documents
Bibliography
Bibliography
118
electrical and mechanical properties of CNF-based resins”, Nanotechnology 2013, 24,
305704.
12. Sun, L. H.; Ounaies, Z.; Gao, X. L.; Whalen, C. A.; Yang, Z. G. “Preparation,
characterization and Modelling of Carbon Nanofiber/epoxy Nanocomposites”, J.
Nanomater. 2011, 2011, 1-8.
13. Mordkovich, V. Z. “Carbon nanofibers: A new ultrahigh-strength material for
chemical technology”, Theor. Foundn Chem. Eng. 2003, 37, 429-438.
14. Allaoui, A.; Hoa, S. V.; Pugh, M. D. “The electronic transport properties and
microstructure of carbon nanofiber/epoxy composites”, Compos. Sci. Technol. 2008,
68, 410-416.
15. Puglia, D.; Valentini, L.; Kenny, J. M. “Analysis of the cure reaction of carbon
nanotubes/epoxy resin composites through thermal analysis and Raman
spectroscopy”, J. Appl. Polym. Sci. 2003, 88, 452–458.
16. Chang, Y. H.; Lin, K. F. “Rheological properties of epoxy/MWCNT suspensions
associated with the surface modification of MWCNT by physisorption of aromatic
ionic salts”, Mater. Chem. Phys. 2016, 173, 446-451.
17. Goyat, M. S.; Suresh, S.; Bahl, S.; Halder, S.; Ghosh, P. K. “Thermomechanical
response and toughening mechanisms of a carbon nano bead reinforced epoxy
composite”, Mater. Chem. Phys. 2015, 166, 144-152.
18. Bal, S. “Experimental study of mechanical and electrical properties of carbon
nanofiber/epoxy composites”, Mater. Des. 2010, 31(5), 2406-2413.
19. Green, K. J.; Dean, D. R.; Vaidya, U. K.; Nyairo, E. “Multiscale fiber reinforced
composites based on a carbon nanofiber/epoxy nanophased polymer matrix:
synthesis, mechanical, and thermomechanical behavior”, Compo. Part A: Appl. Sci.
Manuf. 2009, 40(9), 1470-1475.
20. Patton, R. D.; Pittman, C. U.; Wang, L.; Hill, J. R. “Vapor grown carbon fiber
composites with epoxy and poly(phenylene sulfide) matrices”, Compo. Part A 1999,
30, 1081-1091.
21. Choi, Y. K.; Sugimoto, K. I.; Song, S. M.; Gotoh, Y.; Ohkoshi, Y.; Endo, M.
“Mechanical and physical properties of epoxy composites reinforced by vapor grown
carbon nanofibers”, Carbon 2005, 43, 2199-2208.
119
22. Sandler, J.; Werner, P.; Shaffer, M. S. P.; Demchuk, V.; Altstadt, V.; Windle, A. H.
“Carbon-nanofiber reinforced poly (ether ether ketone) composites”, Compo. Part A:
Appl. Sci. Manuf. 2002, 33, 1033-1039.
23. Ma, H.; zeng, J.; Realff, M. L. Kumar, S.; Schiraldi, D. A. “Processing, structure and
properties of fibers from polyster/carbon nanofiber composites”, Compos. Sci.
Technol. 2003, 63, 1617-1628.
24. Choi, Y. K., Sugimoto, K. I.; Song, S. M.; Endo, M. “Mechanical and thermal
properties of vapor-grown carbon nanofiber and polycarbonate composite sheets”,
Mater. Lett. 2005, 59, 3514-3520.
25. Zhou, Y.; Pervin, F.; Jeelani, S. “Effect vapor grown carbon nanofiber on thermal
and mechanical properties of epoxy”, J. Mater. Sci. 2007, 42, 7544-7553.
26. Zhu, J.; Wei, S.; Ryu, J.; Budhathoki, M.; Liang, G.; Guo, Z. “In situ stabilized
carbon nanofiber (CNF) reinforced epoxy nanocomposites”, J. Mater. Chem. 2010,
20, 4937-4948.
27. Saleh, T. A.; Gupta, V. K. “Nanomaterial and polymer membranes: Synthesis,
characterization, and processing, synthesis, classification and properties of
nanomaterials”, 2016, Elsevier, Radurweg 29, Amsterdam, Netherlands.115
28. Pradhan, A. K.; Swain, S. K. “Synthesis and characterization of poly (acrylonitrile-
co-methylmethacrylate) nanocomposites reinforced by functionalized multiwalled
carbon nanotubes”, Iran. Polym. J. 2013, 22, 369-376.
29. Zhang, L.; Aboagye, A.; Kelkar, A.; Lai, C.; Fong, H. “A review: carbon nanofibers
from electrospun polyacrylonitrile and their applications”, J. Mater. Sci. 2014, 49,
463–480.
30. Swarup, S. “Hydantoin and cyanuric acid based epoxy resins using XRD”, Mater.
Sci. Appl. 2011, 2, 1516-1519.
31. Wang, Z.; Zhao, G. L. “Microwave absorption properties of caron nanotubes-epoxy
composites in a frequency range of 2-20 GHz”, Open J. Compos. Mater.2013, 3, 17-
23.
32. Pervin, F.; Zhou, Y.; Rangari, V. K.; Jeelani, S. “Testing and evaluation on the
thermal and mechanical properties of carbon nano fiber reinforced SC-15 epoxy”,
Mater. Sci. Eng. A 2005, 405, 246-253.
120
33. Prolongo, S. G.; Campo, M.; Gude, M. R.; Moran, R. C.; Urena, A. “Thermo-
physical characterization of epoxy resin reinforced by amino-functionalized carbon
nanofibers”, Comp. Sci. Technol. 2009, 69, 349-357.
34. Chen, G. H.; Wu, D. J.; Weng, W. G.; He, B.; Yan, W. “Preparation of polystyrene–
graphite conducting nanocomposites via intercalation polymerization”, Polym. Int.
2001, 50, 980–985.
35. Shokrieh, M. M.; Esmkhani, M.; Vahedi, F.; Shahverdi, H. R. “Improvement of
mechanical and electrical properties of epoxy resin with carbon nanofibers”, Iran.
Polym. J. 2013, 22,721–727.
36. Karippal, J. J.; Narasimha Murthy, H. N.; Rai, K. S.; Krishna, M.; Sreejith, M.
“Effect of amine functionalization of CNF on electrical, thermal, and mechanical
properties of epoxy/CNF composites”, Polym. Bull. 2010, 65, 849-861.
121