Professional Documents
Culture Documents
Va-7010 Englisch
Va-7010 Englisch
DN 8 up to DN 80 PN 16 - PN 40
• Compact design
• Unaffected by lightly contaminated media
• For temperatures from -30°C up to +200°C
• Working pressure up to 40 bar
• Versatile actuator options
Technical Information
Body material
Brass CC754S Bronze CC491K Stainl. steel 1.4408
Nominal size DN 65 and DN 80 DN 15 to DN 50 DN 8 to DN 80
Connections:
Pipe thread acc. DIN 2999 2 1/2" and 3" 1/2" - 2" 1/4" - 3"
NPT thread 2 1/2" and 3" 1/2" - 2" 1/4" - 3" Options
welding ends (DIN/ISO) 1/2" - 2 1/2" e. g.:
- limit switches
Nominal pressure PN 16 PN 16 PN 40
• inductive proximity switch
Max. fluid temperature: • electrical switches
with metal bonnet -30°C up to 170°C -30°C up to 170° C -30°C up to 170°C - pilot valves
*optional up to +200°C* up to +200°C* - manual override
with plastic bonnet -30°C up to 135°C -30°C up to 135 °C -30°C up to 135°C - oil and grease free version
- PTFE free version
diaphragm act.,stainless steel -30°C up to 200°C
- ASI-Bus
Ambient temperature -30°C up to +60°C
Viscosity of the fluid maximum 600 mm²/s (600cSt, 80°E)
Vacuum maximum 0,001bar abs
Working pressure for
maximum 12 bar
hollow construction
Working pressure for
maximum 16 bar
Tri-Clamp connection
Spring closes NC (closing with flow) Spring opens NO (closing against flow)
Normally closed angle seat valves, closing with the flow. Normally open angle seat valves, closing against the flow.
Operates better with gases, with liquids water hammer is
possible.
30 30
25 25
DN20
20 DN25 20
15 15
Upper limit for brass and bronze Upper limit for brass and bronze
DN32 DN25
10 10
DN40 DN32
5 DN50 5
DN40
0 0
0 1 2 3 4 5 6 0 1 2 3 4 5 6
TYPE 7010-NC-with flow Pilot pressure [bar] TYPE 7010-NO-against flow Pilot pressure [bar]
30 30
25 25 DN40
DN40
20 20
15 15 DN50
Upper limit for DN50 Upper limit for brass and bronze
brass and bronze
10 10
DN65 DN65
5 DN80 5
DN80
0 0
0 1 2 3 4 5 6 0 1 2 3 4 5 6
TYPE 7010-NC-with flow Pilot pressure [bar] TYPE 7010-NO-against flow Pilot pressure [bar]
40
Working pressure [bar]
40
Working pressure [bar]
25 25
DN40 DN40
20 20
DN50 DN50
15 Upper limit for brass and bronze 15 Upper limit for brass and bronze
DN65 DN65
10 10
DN80 DN80
5 5
0 0
0 1 2 3 4 5 6 0 1 2 3 4 5 6
TYPE 7010-NC-with flow Pilot pressure [bar] TYPE 7010-NO-against flow Pilot pressure [bar]
Angle Seat Valve 7010, standard design
NC (closing against flow)
Nominal Working pressure Pilot Piston Nominal Working pressure* Pilot Piston
size (i.e. Differential) pressure Ø Springs size (i.e. Differential) pressure Ø Springs
bar bar mm bar bar mm
stainless stainless bronze
bronze
steel steel brass
DN8 40 - 3,5 - 10 50 1
DN40 1,9 1,9 4,5 - 10 50 2
DN10 40 - 3,5 - 10 50 1
DN40 3,3 3,3 5,7 - 10 50 3
DN15 22 16 3,5 - 10 50 1
DN40 7 7 3,5 - 10 80 1
DN20 7 7 3,5 - 10 50 1
DN40 10 10 4,4 - 10 80 2
DN20 13 13 4,5 - 10 50 2
DN40 13 13 5,6 - 10 80 3
DN20 19 16 5,7 - 10 50 3
DN40 7 7 1,3 - 10 125 1
DN25 2,5 2,5 3,5 - 10 50 1
DN25 5,8 5,8 4,5 - 10 50 2 DN40 15 15 2,2 - 10 125 2
rolling diaphragm
piston actuator
columne
head section,
reinforced
Spring closes NC (closing with flow) Spring opens NO (closing against flow)
Normally closed angle seat valves, closing with the flow. Normally open angle seat valves, closing against the flow.
Operates better with gases, with liquids water hammer is
possible.
D80 D125
35 35
30 30
25
25
DN50
20
20
DN65
15
DN50 15
DN80
10
DN65 10
5 DN80
5
0
0 1 2 3 4 5 6 0
TYPe 7010-NC-with flow - reinforced pilot pressure [bar] 0 1 2 3 4 5 6
TYPE 7010-NO-against flow -reinforced pilot pressure [bar]
D125 D125
35 35
PEEK
30 30
DN50 DN50
25 25
20
20
DN65 DN65
15
15
DN80
10
10 DN80
5
5
0
0 1 2 3 4 5 6 0
pilot pressure [bar] 0 1 2 3 4 5 6
TYP 7010-NC-with flow-reinforced
TYPE 7010-NO-against flow-reinforced pilot pressure [bar]
40
working pressure [bar]
D250 D250
35 35
PEEK
30 30
DN50 DN50
25 25
20 20
DN65
DN65
15 15
DN80 DN8
10 10
5
5
0
0
0 1 2 3 4 5 6
0 1 2 3 4 5 6
TYPE 7010-NC-with flow-reinforced pilot pressure [bar] pilot pressure [bar]
TYPE 7010-NO-against flow-reinforced
7. Springs 8. Head section 9. Packing 10. Tem perature 11. Accessories 12. Special versions
m aterial version
- standard - standard - standard - Standard - no accessories S further special versions
1 1 spring K reinforced design 2 packing H high temperature 1 electrical position indicator M position indicator w ith cable
underneath version w ith one sw itch bushing
2 2 springs V viton exterior lip 2 electrical position indicator N position indicator w ith plug
sealing w ith tw o sw itches connection
3 3 springs 3 manual emergency operation
T 6 springs U low temperature 4 additional manual operation X ASI-BUS IP65
(D250) version dow n to 5 stroke limitation
W 8 springs -50°C, fluid 6 pilot valve DN 2, 230 V AC
(D250) temperature 7 pilot valve DN 2, 24 V DC
Y 12 springs W low temperature K electr. position indicator
(D250) version dow n to M position indicator w ith tw o
-40°C ambient ind. sw itch 10 - 36 V DC
temperature P position indicator w ith one
ind. sw itch 10 - 36 V DC
T position indicator compact,
inductive 10 - 30 V DC (PNP)
SW1 SW2 E
B
A
C
diaphragm actuator
Text and pictures are not binding. We reserve the right, to alter the equipment.
spring to close
Kvs-
DN Actuator A B* C D E F G Stroke SW1 SW2 α Weight
value
(mm) Rp/NPT (mm) (kg)
50 250 2" 150 25,7 238 338 323 G1/4" 25 68 32 50° 55 14,6
65 250 2 1/2" 180 30,2 238 366 346 G1/4" 25 85 41 45° 80 15,7
80 250 3" 210 33,3 238 407 350 G1/4" 25 100 41 45° - 17,8
* Dimensions in accordance with DIN 3202 T4 M8 Dimensions in mm