Professional Documents
Culture Documents
JRG Ba 1300 1333 e
JRG Ba 1300 1333 e
1 Gunmetal body
2 Slide with seat
3 Permaphragm
4 Valve seal
5 Pressure springs
6 Valve cover
(gunmetal or plastic)
7 Tensioning screw
8 Strainer
9 Transparent- or
gunmetal strainer cup
10 O-ring seal
11 Pressure adjustment
12 Allen Key
2
Nomogramme and installation examples
For JRGURED pressure reducing valves JRG Art. No. 1300 -1335, pressure 6/4 bar
3
Mounting position Advantages of JRGURED
Range of application
The JRGURED pressure reducing valve is approved for
the following application ranges.
JRG No. PN psek Works setting* tmax
bar bar bar °C
1300/1303 25 2–6 4 30
1310/ 1315 25 2–6 4 70
1320 25 0.5 – 2 2 70
1330/ 1335 25 6 – 10 6 70 – with or without unions
– with plastic or gunmetal strainer cup
* Other pressure settings on request.
1300/1303 with transparent strainer cup
made of plastic material • Gunmetal body
1310/1315
1320 > with gunmetal strainer cup
1330/1335 • All parts in contact with water
Size of the Allen key (AKS) made of gunmetal, stainless
Pressure reducing valve steel or plastic material
GN DN AKS
½+¾ 15 + 20 5 mm
1 + 1¼ 25 + 32 6 mm • Excellent control characte-
1½, 2 + 2½ 40, 50 + 65 8 mm ristics even with the smallest
One 360° turn of the Allen key corresponds to a pres- consumed water volumes
sure change of:
Pressure reducing valves GN ½ 0.35 bar
GN ¾-2½ 0.30 bar • Excellent performance values
Installation prescriptions
For the installation of JRGURED pressure reducing
valves, please apply the country-specific guidelines.
Art. No. GN DN d1 d2 d3 d4 h1 h2 l1 l2 z kg
1300.240 ½ 15 R½ G¾ Rp 1/8 54 33.5 78.5 130 25 40 5 0.680
1300.320 ¾ 20 R¾ G1 Rp 1/8 60 42 85.5 142 28.5 42.5 5 0.910
1300.400 1 25 R1 G 1¼ Rp ¼ 72 51.5 110 167 33.5 50 6 1.670
1300.480 1¼ 32 R 1¼ G 1½ Rp ¼ 80 64 120.5 196 38 60 6 2.410
1300.560 1½ 40 R 1½ G 1¾ Rp ¼ 95.5 80 157 222 38.5 72.5 8 4.050
1300.640 2 50 R2 G 2 3/8 Rp ¼ 105 98 172 268 46.5 87.5 8 6.140
1300.720 2½ 65 R 2½ G3 Rp ¼ 105 98 172 292 56 90 8 7.390
Art. No. GN DN d2 d3 d4 h1 h2 l1 z kg
1303.015 ½ 15 G¾ Rp 1/8 54 33.5 78.5 80 40 5 0.510
1303.020 ¾ 20 G1 Rp 1/8 60 42 85.5 85 42.5 5 0.660
1303.025 1 25 G 1¼ Rp ¼ 72 51.5 110 100 50 6 1.220
1303.032 1¼ 32 G 1½ Rp ¼ 80 64 120.5 120 60 6 1.710
1303.040 1½ 40 G 1¾ Rp ¼ 95.5 80 157 145 72.5 8 3.190
1303.050 2 50 G 2 3/8 Rp ¼ 105 98 172 175 87.5 8 4.620
1303.065 2½ 65 G3 Rp ¼ 105 98 172 180 90 8 4.920
JRG Art. No. is necessary for the order. Subject to technical modification at any time.
5
JRGURED with gunmetal strainer cup
Art. No. GN DN d1 d2 d3 d4 h1 h2 l1 l2 z kg
1310.240 ½ 15 R½ G¾ Rp 1/8 52 28.5 78.5 130 25 40 5 0.720
1310.320 ¾ 20 R¾ G1 Rp 1/8 58 35.5 85.5 142 28.5 42.5 5 0.980
1310.400 1 25 R1 G 1¼ Rp ¼ 70 51.5 110 167 33.5 50 6 1.800
1310.480 1¼ 32 R 1¼ G 1½ Rp ¼ 77 64 120.5 196 38 60 6 2.650
1310.560 1½ 40 R 1½ G 1¾ Rp ¼ 93.5 80 157 222 38.5 72.5 8 4.440
1310.640 2 50 R2 G 2 3/8 Rp ¼ 103 98 172 268 46.5 87.5 8 6.830
1310.720 2½ 65 R 2½ G3 Rp ¼ 103 98 172 292 56 90 8 8.070
Art. No. GN DN d1 d2 d3 d4 h1 h2 l1 l2 z kg
1320.240 ½ 15 R½ G¾ Rp 1/8 52 28.5 78.5 130 25 40 5 0.690
1320.320 ¾ 20 R¾ G1 Rp 1/8 58 35.5 85.5 142 28.5 42.5 5 0.940
1320.400 1 25 R1 G 1¼ Rp ¼ 70 51.5 110 167 33.5 50 6 1.730
1320.480 1¼ 32 R 1¼ G 1½ Rp ¼ 77 64 120.5 196 38 60 6 2.540
1320.560 1½ 40 R 1½ G 1¾ Rp ¼ 93.5 80 157 222 38.5 72.5 8 4.220
1320.640 2 50 R2 G 2 3/8 Rp ¼ 103 98 172 268 46.5 87.5 8 6.530
1320.720 2½ 65 R 2½ G3 Rp ¼ 103 98 172 292 56 90 8 7.770
Art. No. GN DN d1 d2 d3 d4 h1 h2 l1 l2 z kg
1330.240 ½ 15 R½ G¾ Rp 1/8 52 28.5 78.5 130 25 40 5 0.730
1330.320 ¾ 20 R¾ G1 Rp 1/8 58 35.5 85.5 142 28.5 42.5 5 1.020
1330.400 1 25 R1 G 1¼ Rp ¼ 70 51.5 110 167 33.5 50 6 1.870
1330.480 1¼ 32 R 1¼ G 1½ Rp ¼ 77 64 120.5 196 38 60 6 2.720
1330.560 1½ 40 R 1½ G 1¾ Rp ¼ 93.5 80 157 222 38.5 72.5 8 4.590
1330.640 2 50 R2 G 2 3/8 Rp ¼ 103 98 172 268 46.5 87.5 8 7.080
1330.720 2½ 65 R 2½ G3 Rp ¼ 103 98 172 292 56 90 8 8.320
JRG Art. No. is necessary for the order. Subject to technical modification at any time.
6
JRGURED with gunmetal cover and gunmetal strainer cup
Art. No. GN DN d1 d2 d3 d4 h1 h2 l1 l2 z kg
1315.240 ½ 15 R½ G¾ Rp 1/8 54 28.5 86 148 34 40 5 1.084
1315.320 ¾ 20 R¾ G1 Rp 1/8 60 35.5 92.5 159 37 42.5 5 1.400
1315.400 1 25 R1 G 1¼ Rp ¼ 72 51.5 115.5 184 42 50 6 2.315
1315.480 1¼ 32 R 1¼ G 1½ Rp ¼ 80 64 124 212 46 60 6 3.360
1315.560 1½ 40 R 1½ G 1¾ Rp ¼ 95.5 80 158.5 241 48 72.5 8 5.535
1315.640 2 50 R2 G 2 3/8 Rp ¼ 105 98 171.5 289 57 87.5 8 8.200
1315.720 2½ 60 R 2½ G3 Rp ¼ 105 98 171.5 310 65 90 8 9.330
Art. No. GN DN d1 d2 d3 d4 h1 h2 l1 l2 z kg
1335.240 ½ 15 R½ G¾ Rp 1/8 54 28.5 86 148 34 40 5 1.090
1335.320 ¾ 20 R¾ G1 Rp 1/8 60 35.5 92.5 159 37 42.5 5 1.450
1335.400 1 25 R1 G 1¼ Rp ¼ 72 51.5 115.5 184 42 50 6 2.385
1335.480 1¼ 32 R 1¼ G 1½ Rp ¼ 80 64 124 212 46 60 6 3.430
1335.560 1½ 40 R 1½ G 1¾ Rp ¼ 95.5 80 158.5 241 48 72.5 8 5.700
1335.640 2 50 R2 G 2 3/8 Rp ¼ 105 98 171.5 289 57 87.5 8 8.450
1335.720 2½ 65 R 2½ G3 Rp ¼ 105 98 171.5 310 65 90 8 9.610
JRG Art. No. is necessary for the order. Subject to technical modification at any time.
7
Unions overview
Connections
. . . . . . . . . . . .
. . . . . . . .
. . . . . .
8
Combinations of manometer valve
Accessories
Manometer valve
made of brass, with push button, for water and air up
to 100°C
Art. No. GN d1 d2 l kg
8101.010 1/8 R 1/8 Rp ¼ 25 0.100
Art. Nr. GN d1 d2 l kg
8102.010 ¼ R¼ Rp ¼ 30 0.120
Manometer
with direct connection, for water and air up to 60°C
Art. No. GN d d1 l l1 bar kg
1 1
8106.040 /8 40 R /8 46 10 0-12 0.075
d1
8106.080 ¼ 50 R¼ 48 12 0-12 0.120
d l1
l
Manometer
for water and air up to 60°C
Art. No. GN d d1 h h1 kg
8107.080 ¼ 40 R¼ 38 12 0.075
8107.081 ¼ 50 R¼ 44 12 0.120
Soldering union
made of brass/gunmetal, with gasket
Art. No. DN d1 d2 l1 l2 z kg
8205.015 12 15 G¾ 19.5 6 7.5 0.060
8205.018 15 18 G¾ 21.5 6 7.5 0.070
8205.022 20 22 G1 24.5 7 7.5 0.110
8205.028 25 28 G 1¼ 28.5 8 8.5 0.250
8205.035 32 35 G 1½ 33.5 9 8.5 0.330
8205.042 40 42 G 1¾ 38.5 10 9.5 0.420
8205.154 50 54 G 2 3/8 43.5 11 9.5 0.580
Sleeve connection, BR 2 on BR 1
to produce combinations, fittings with male thread
according EN ISO 228-1, made of gunmetal, with female
thread and loose nut and gaskets*
Adapter to fittings
made of gunmetal, with female thread and gasket*,
plastic cone grip union MT for JRG Sanipex d16/d20
and JRG Sanipex MT pipes.