CL-NG-6460-002-025 Check List of Capacitive Voltage Transformers (CVT) 110 kV through Page Number: 380 kV Commissioning 1 of 4
1.0 Equipment General Data and Information
Substation NATIONAL GRID
Bay/Panel NATIONAL GRID Equipment NATIONAL GRID Serial No NATIONAL GRID 2.0 Mechanical Checks and Visual Inspections
Item Description Done Remarks
1. Inspect for physical damage or defects. Check name plate and information with drawings and 2. specifications as specified in Data Schedule. 3. Check tightness of all bolted connections. Check VT is grounded by bare copper conductor 1x240 mm 2 4. fault current level 40kA and 2x240 mm2 for fault current level above 40 kA. Check mechanical clearances and proper operation of all 5. isolation and grounding devices (as applicable). 6. Check oil level. Check electromagnetic unit consists of intermediate 7. transformer, compensating reactor and associated protection circuitry. Check that the rated burden is at least 100VA at a power 8. factor 0.85 lagging Check the following are enclosed in the LV terminal box Secondary terminals Fuses/MCBs 9. Damping devices Protective devices Thermostatically controlled space heater Check that the LV terminal box is part of the base housing 10. enclosure. The CVT for 380 KV nominal system voltages shall be 11. supplied with a corona ring.
Archiving System Website: http://AMAS
NATIONAL GRID
Title: Index Number:
CL-NG-6460-002-025 Check List of Capacitive Voltage Transformers (CVT) 110 kV through Page Number: 380 kV Commissioning 2 of 4
Check that the LV terminal box internal face of the cover is
12. provided with a metallic plate with the schematic diagram of windings and of their terminal markings. Check that the terminals in terminal block in LV terminal box 13. is non-captive pan head screw type. Check the external earthing copper conductor connected of 14. 240mm2 connected to metal base. 15. Check earthing secondary windings and cable screens. 16. Check for oil leakage. Check electromagnetic unit spark gaps for correct setting (if 17. applicable). Make sure that MCB for VT secondary is provided in the VT 18. box. 19. Check drain coils (if applicable). Check that the CVT has been provided with Ferro resonance 20. damping devices.
3.0 Electrical Tests
Item Description Done Remarks
1. Check electrical operation of all isolating and grounding devices (if applicable). 2. Insulation test as following: Primary to ground 5kV DC for one minute. Primary to secondary 2.5kV DC for one minute. Secondary to ground and core to core 1kV DC for one minute 3. Winding Resistance Test. (Ambient temperature shall be recorded; winding resistance shall be referred to 75°C). 4. Polarity Test. 5. Turns Ratio Test. 6. Measure dissipation factor (tan δ). 7. Check on fast damping device (FDD). 8. Check Primary and secondary fuses ratings for (if applicable). Archiving System Website: http://AMAS NATIONAL GRID
Title: Index Number:
CL-NG-6460-002-025 Check List of Capacitive Voltage Transformers (CVT) 110 kV through Page Number: 380 kV Commissioning 3 of 4
9. Check VT HV neutral is solidly grounded.
10. Check electrical operation of all isolating and grounding devices (if applicable). 11. Check phase sequence, for the final three-phase assembly. 12. Verify secondary circuits, terminal to terminal for correctness and tightness. 13. Loop resistance test and burden test. 14. Check gaps of protective flashover devices (if applicable).
CSD Contractor T&C Contractor
Name Sign.
Archiving System Website: http://AMAS
NATIONAL GRID
Title: Index Number:
CL-NG-6460-002-025 Check List of Capacitive Voltage Transformers (CVT) 110 kV through Page Number: 380 kV Commissioning 4 of 4