Professional Documents
Culture Documents
حفر
حفر
حفر
A.Fractured Formation.
B. Loss of Circulation
C. kick
D. Blowout
3-Given the following well data: TVD 9500 ft. Casing Shoe MD 5495 ft. Current
Mud Weight 10.5 ppg. Formation Pressure Gradient 0.52 psi/ft.
A. Exist
• Reservoir
• Earth Crust
• Annulus
• Hole
• Well.
• Density.
• Specific Weight.
• Viscosity.
7-Hydrostatic Pressure is:
8- When raising and lowering the drillstring, casing string or liner in the wellbore, this
operation known as
• Reciprocating
• Wiper Trip
9- Which of the following tools is used for measuring the variation of diameter at any
given depth of the well?
• Temperature Log.
• Caliper Log.
• SP Log
• GR log
10-You are drilling 17 ½ hole section and the Caliper diameter is 12.73 inch this
variation in hole shape is known as
• Reaming
• Cleaning
• Jetting
• Reciprocating
12-aliper Log shows that tight spot (formation swell and flow into the borehole) from
4560 ft to 4780 ft. what do you have to do
A. Kick.
B. Influx.
C. Blowout.
A. On-balance.
B. Under balance.
C. Overbalance.
15-
16-
17-
• Bottoms up.
• Bottoms up.
• Annulus
• Hole
• Well.
21-All the components from the swivel down to the bit is called
• Drill stem.
22-A special drilling tool that can enlarge an existing hole to the required diameter is
called
•Drill Bit.
• Reamer.
23-
.
24-
25-
26-if you are drilling with aerated mud, can you use the Bell Nipple
27-if you are expecting Hydrogen Sulphide and you want to keep the gas away from
the Rotary table what do you have to do?
28-