Professional Documents
Culture Documents
Masterlink BTM-III Schema
Masterlink BTM-III Schema
Connect the Masterlink BTM III as indicated below, but do not place the 2A-T fuses of the
3 voltage sense wires yet!
Twisted wires
+ POWER SUPPLY
DC power supply
8…50VDC
+ – + – + –
Mastervolt International B.V, P.O.Box 22947, NL-1100 DK Amsterdam, The Netherlands. Tel.: +31-20-3422100 Email: info@mastervolt.com Web: www.mastervolt.com v1.1 061113EN
Basic operation Masterlink BTM-III
The Masterlink BTM-III is the fuel gauge for up to three battery banks
The LED bar shows how full the main battery set is (bank 1): each LED represents 16% of the total capacity.
This green LED indicates that the main batteries are full (96-100% State Of Charge).
Use
Select shortly to scroll through the menus
If you hold Select pressed for approximately 3
seconds, several advanced Submenus can be
entered (see below)
25.54V - 29.3A
42% 25:14
Use
Set for adjustments
The Main menu (chapter 6) provides a quick status overview of your batteries. Just press Select shortly to scroll.
This screen is displayed Press Select shortly. Press Select again for a quick Press Select several
by default. The next screen shows status overview of all battery times to show the
It shows the voltage the actual capacity banks simultaneously. actual data of each
(Volt), current (Amps), consumed from the It shows the Battery voltage of battery bank
state of charge (%) and main battery (battery all battery banks and the individually
time-to-go (hrs:min) of bank 1) State Of Charge (SOC)
the main battery (battery
bank 1)
If you hold Select pressed for approximately 3 seconds, several advanced Submenus can be entered (chapter 7)
HISTORICAL BANK 1
SET TO ENTER SET TO ENTER
BANK 2 Select
Set Select SET TO ENTER
BANK 3 SETTINGS EXIT LEVEL
SET TO ENTER SET TO ENTER PRESS SET
Set Select Set Select Set
Historical data menu Battery Bank menus Settings menu From here you can
(see chapter 8). (1, 2 and 3) (see chapter 9). (see chapter 10). return to the main
This menu shows Used to adjust the Masterlink General settings like menu (see above) by
the history of your BTM-III in accordance with language, energy save pressing Set shortly.
battery set(s) the specifications of each mode and advanced Also if none of the
battery set and to adjust the settings for each battery buttons was touched
trigger points for the alarm bank. Here you can also to for 40 seconds, the
function of each battery set. reset the Masterlink BTM Masterlink BTM-III
III back to the factory returns to the main
NOTE: Displayed data may differ. settings menu.
Mastervolt International B.V, P.O.Box 22947, NL-1100 DK Amsterdam, The Netherlands. Tel.: +31-20-3422100 Email: info@mastervolt.com Web: www.mastervolt.com v1.1 061113EN