Professional Documents
Culture Documents
Basateem Calcs - Corner - 15nov2022
Basateem Calcs - Corner - 15nov2022
FOR
NOVEMBER 2022
Structural Notes For
Typical corner Villa
1. Design Notes
1.1. Introduction:
The report describes the structural Analysis & design Corner villa as per the
provided architectural dwgs.
In this phase of study, the basic design Criteria (Loading Materials, etc)
shall be as per the project Arch dwgs. A rigorous structural analysis is
performed with three-dimensional modeling using programs Etabs 16.0x,
Safe 1.x
2. Design Criteria:
The building straining forces (Gravitational and Lateral) and capacity of the
structural resisting elements were determined in accordance to the
following codes of practice:
Columns
The reinforced concrete columns were used mainly to resist gravitational
loads and the lateral loads induced by the building sway due to lateral
forces. They were represented in the numerical analysis frame element
fixed edge connections.
(Columns can be design Checked from Etabs Model)
Beams
Beams were used in the structural Analysis for the following.
• Beams to used support the slabs and transfer loads to the column
Structural Notes For
Typical corner Villa
& Walls. fixed at their edges to the vertical elements ( walls and /or
• Reinforced columns ), the main role of these beams was to induce a framing
concrete behavior to the lateral resisting system, allowing therefore, the
beams, reduction of earth quake moments and
corresponding lateral sway of the building
3.3. Foundations
3.5.1. Concrete:
3.5.2. Reinforcement:
Steel reinforcement shall be high Yield deformed bars grade 60 ( fy =
420mpa)
Structural Notes For
Typical Inner Villa
4. LOAD CALCULTIONS
Dead Load
2.5 Kn/m2
Live load
Office 5 Kn/m2
Dead Load
2.50
Live load
Sway Check :
Safe Geometry
Loading assignments
Structural Notes For
Typical Corner Villa
Safe Geometry
Loading assignments
Structural Notes For
Typical Corner Villa
Safe Geometry
Safe Geometry
Safe Settlement
Structural Notes For
Typical Corner Villa