Professional Documents
Culture Documents
g2 Laundering 1st Edition Amendment3
g2 Laundering 1st Edition Amendment3
Verification Methods
Prepared by the Ministry of Business, Innovation and Employment
G2
Status of Verification Methods and Acceptable Solutions
Verification Methods and Acceptable Solutions are prepared by the Ministry of Business, Innovation and Employment in
accordance with section 22 of the Building Act 2004. Verification Methods and Acceptable Solutions are for use in
establishing compliance with the New Zealand Building Code.
A person who complies with a Verification Method or Acceptable Solution will be treated as having complied with the
provisions of the Building Code to which the Verification Method or Acceptable Solution relates. However, using a
Verification Method or Acceptable Solution is only one method of complying with the Building Code. There may be
alternative ways to comply.
Users should make themselves familiar with the preface to the New Zealand Building Code Handbook, which describes
the status of Verification Methods and Acceptable Solutions and explains alternative methods of achieving compliance.
Defined words (italicised in the text) and classified uses are explained in Clauses A1 and A2 of the Building Code and in
the Definitions at the start of this document.
The Ministry of Business, Innovation and Employment owns or has licences to use all
images and trademarks in this document. You must not use or reproduce images and
trademarks featured in this document for any purpose (except as part of an accurate
reproduction of this document) unless you first obtain the written permission of the
Ministry of Business, Innovation and Employment.
2
Document Status
The most recent version of this document (Amendment 3), as detailed in the Document History, is approved by the Chief
Executive of the Ministry of Business, Innovation and Employment. It is effective from 1 January 2017 and supersedes all previous
versions of this document.
The previous version of this document (Amendment 2) will cease to have effect on 30 May 2017.
People using this document should check for amendments on a regular basis. The Ministry of Business, Innovation and
Employment may amend any part of any Verification Method or Acceptable Solution at any time. Up-to-date versions of
Verification Methods and Acceptable Solutions are available from www.building.govt.nz
Date Alterations
Note: Page numbers relate to the document at the time of Amendment and may not match page numbers in current document.
2A
2B
C l a u s e G2 LAUNDERING
Effective from
29 December 2000
D E PA R T M E N T O F B U I L D I N G A N D H O U S I N G 10 October 2011
3
4
C o n t e n ts G2 /VM1 & AS1 LAUNDERING
Contents
Page
References 7
Definitions 9
Index 15
References
For the purposes of New Zealand Building Code (NZBC) compliance, the Standards and documents
referenced in these Acceptable Solutions and Verification Methods (primary reference documents) Amend 3
Jan 2017
must be the editions, along with their specific amendments, listed below. Where these primary
reference documents refer to other Standards or documents (secondary reference documents),
which in turn may also refer to other Standards or documents, and so on (lower-order reference
documents), then the version in effect at the date of publication of these Acceptable Solutions and Amend 3
Amend 2
Jan 2017
Oct 2011 Verification Methods must be used.
Where quoted
Amend 3
Jan 2017 Standards New Zealand
Amend 2
Oct 2011 AS/NZS 1229: 2002 Laundry troughs and tubs AS1 1.0.3
Definitions
This is an abbreviated list of definitions for words or terms particularly relevant to these
Acceptable Solutions and Verification Methods. The definitions for any other italicised words may
Amends
2 and 3 be found in the New Zealand Building Code Handbook.
Accessible Having features to permit use by Socket outlet An accessory fixed to a wall
people with disabilities. or ceiling and designed to accept a plug
Adequate Adequate to achieve the objectives that extends the electrical supply to an
of the building code. appliance by means of a flexible cable.
Amenity An attribute of a building which Water seal The depth of water that can be
contributes to the health, physical retained in a water trap.
independence, and well being of the Water trap A fitting designed to retain a
building's users but which is not associated depth of water that prevents foul air and
Amend 1
with disease or a specific illness. gases escaping from the plumbing system Jul 2001
Building has the meaning given to it by or foul water drainage system and entering
sections 8 and 9 of the Building Act 2004. a building.
D E PA R T M E N T O F B U I L D I N G A N D H O U S I N G July 1992
11
12
A c c e p ta b le So lu tio n G2 /AS1 LAUNDERING
COMMENT:
Amend 3
This provision allows for the filling or washing of Figure 1: Minimum Dimensions for Laundries Jan 2017
containers such as buckets. Paragraph 1.2.1
Amend 2
Oct 2011 1.0.3 Another Acceptable Solution
Amend 3
Jan 2017 Laundry tubs complying with AS/NZS 1229
are acceptable, but exceed the requirements
given in Paragraph 1.0.2.
COMMENT:
NZBC G9 “Electricity”, G12 “Water Supplies”, and G13
“Foul Water” are also relevant to laundering facilities.
D E PA R T M E N T O F B U I L D I N G A N D H O U S I N G 10 October 2011
15
16