on am 50 yn X D S Water-reducing accelerator admixture for concrete
DESCRIPTION APPLICATION PROCEDURE
Dynamon SX 50 is a polycarboxylate ether (PCE) based, It is preferable to add Dynamon SX 50 into the mixer after non-chloride, water reducing and set-accelerating all of the ingredients (cement, aggregates and water). The admixture for concrete. action of Dynamon SX 50 is more effective when added Dynamon SX 50 complies with AS1478.1 as Type WRAc, later, however may be added to the concrete with the initial water-reducing and set-accelerating. mixing water.
WHERE TO USE COMPATIBILITY WITH OTHER PRODUCTS
Dynamon SX 50 is used in all types of concrete where Dynamon SX 50 is compatible with other products for water reduction and acceleration of finishing is required, producing special concrete, especially with: typically in cold ambient temperatures. Dynamon SX • Dynamon HAA, the non-chloride set-accelerating 50 improves both the plastic and hardened properties of admixture; concrete. • air entraining admixtures from the Mapeair AE range; Some application examples • Mapeplast SF, silica fume based powder admixture for manufacturing “top-quality” concrete (strength, • ready mixed concrete, pumped, sprayed or conventionally impermeability, durability); placed especially in cold conditions. • Expancrete and Mapecure SRA 25 expansive and • pre-stressed, standard weight or lightweight shrinkage-reduction admixture, to produce compensated- • architectural concrete, coloured or exposed finish shrinkage concrete or with no shrinkage; • all concrete requiring a non-chloride water reducing and • form-release agents DMA and Mapeform Eco for set-accelerating admixture. releasing concrete from formworks; TECHNICAL CHARACTERISTICS • Mapecure curing emulsions to protect form-released Dynamon SX 50 is a totally formaldehyde-free water concrete structures form rapid water evaporation. solution of acrylic polymers that can effectively disperse Each admixture should be dispensed and added separately cement granules with secondary components that to the wetted concrete or to the initial batching water. accelerate set and improve the cohesion and the pumpability of concrete. CONSUMPTION on am 50 TECHNICAL DATA (typical values) n X Dy S PRODUCT IDENTITY
Classification according to A1478.1: WRAc
Consistency: liquid
Colour: amber
Density 1.19 +/- 0.03
pH: 5.1 +/- 1.0
Dose by volume: information must, in every case, be taken as
From 300 - 800 ml/100 kg of cement. Different merely indicative and subject to confirmation dosages from those suggested must be after long-term practical application; for previously tested through concrete trials, this reason, anyone who intends to use the in addition to consulting MAPEI Technical product must ensure beforehand that it is Services Department. suitable for the envisaged application. In every case, the user alone is fully responsible PACKAGING for any consequences deriving from the use Dynamon SX 50 is available in 200 litre of the product. drums, 1000 litre IBCs and bulk. Please refer to the current version of the Technical Data Sheet, available from our STORAGE website at www.mapei.com.au..
Any reproduction of texts, photos and illustrations published
Dynamon SX 50 can be stored for 12 months in closed containers and protected from LEGAL NOTICE
here is prohibited and subject to prosecution
frost. Exposure to direct sunlight can provoke variations of the colour tone without altering The contents of this Technical Data Sheet in any way the performances of the product. (“TDS”) may be copied into another project-related document, but the resulting SAFETY INSTRUCTIONS FOR document shall not supplement or replace PREPARATION AND APPLICATION requirements per the TDS in force at the For further and complete information about time of the MAPEI product installation. The the safe use of our product please refer to our most up-to-date TDS can be downloaded latest version of the Safety Data Sheet available from our website www.mapei.com.au. for download from our website at ANY ALTERATION TO THE WORDING www.mapei.com.au. OR REQUIREMENTS CONTAINED OR DERIVED FROM THIS TDS EXCLUDES THE PRODUCT FOR PROFESSIONAL USE. RESPONSIBILITY OF MAPEI.
WARNING All relevant references
Although the technical details and for the product are available recommendations contained in this product data sheet correspond to the best of our upon request and from knowledge and experience, all the above www.mapei.com.au 8737-05-2021 (AUS)