Professional Documents
Culture Documents
Finndisp A-10 DS Sds en
Finndisp A-10 DS Sds en
1.2 Relevant identified uses of the substance or mixture and uses advised against
Identified uses: Architectural Binder Coatings.
Supplemental information
EUH210 Safety data sheet available on request.
3.2 Mixtures
CASRN _ >= 1,0 - < 2,5 % Sodium lauryl ether Eye Irrit. - 2 - H319
9004-82-4 sulfate Aquatic Chronic - 3 - H412
EC-No.
Not available
Index-No.
–
For the full text of the H-Statements mentioned in this Section, see Section 16.
Inhalation: Move person to fresh air and keep comfortable for breathing; consult a physician.
Skin contact: Remove material from skin immediately by washing with soap and plenty of water.
Remove contaminated clothing and shoes while washing. Seek medical attention if irritation or rash
occurs. Wash clothing before reuse. Discard items which cannot be decontaminated, including leather
articles such as shoes, belts and watchbands.
Eye contact: Flush eyes thoroughly with water for several minutes. Remove contact lenses after the
initial 1-2 minutes and continue flushing for several additional minutes. If effects occur, consult a
physician, preferably an ophthalmologist.
4.2 Most important symptoms and effects, both acute and delayed:
Contains component(s) which have caused allergic skin sensitization in guinea pigs.
Page 2 of 13
Product name: FINNDISP™ A 10 DS Emulsion Revision Date: 10.02.2020
Version: 1.0
4.3 Indication of any immediate medical attention and special treatment needed
Notes to physician: No specific antidote. Treatment of exposure should be directed at the control of
symptoms and the clinical condition of the patient.
Suitable extinguishing media: Use extinguishing media appropriate for surrounding fire..
Unusual Fire and Explosion Hazards: Material can splatter above 100C/212F.. Dried
product can burn..
Special protective equipment for firefighters: Wear self-contained breathing apparatus and
protective suit..
6.2 Environmental precautions: CAUTION: Keep spills and cleaning runoff out of municipal sewers
and open bodies of water.
6.3 Methods and materials for containment and cleaning up: Contain spills immediately with inert
materials (e.g., sand, earth). Transfer liquids and solid diking material to separate suitable containers
for recovery or disposal.
6.4 Reference to other sections: References to other sections, if applicable, have been provided in
the previous sub-sections.
Page 3 of 13
Product name: FINNDISP™ A 10 DS Emulsion Revision Date: 10.02.2020
Version: 1.0
7.2 Conditions for safe storage, including any incompatibilities: Keep from freezing - product
stability may be affected. STIR WELL BEFORE USE.
Storage stability
Storage temperature: 1 - 49 °C
Other data: Monomer vapors can be evolved when material is heated during processing operations.
See SECTION 8, for types of ventilation required.
7.3 Specific end use(s): See the technical data sheet on this product for further information.
Page 4 of 13
Product name: FINNDISP™ A 10 DS Emulsion Revision Date: 10.02.2020
Version: 1.0
Page 5 of 13
Product name: FINNDISP™ A 10 DS Emulsion Revision Date: 10.02.2020
Version: 1.0
NOTE: The physical data presented above are typical values and should not be construed as a
specification.
10.5 Incompatible materials: There are no known materials which are incompatible with this product.
10.6 Hazardous decomposition products: Thermal decomposition may yield styrene and acrylic
monomers..
Acute toxicity (represents short term exposures with immediate effects - no chronic/delayed
effects known unless otherwise noted)
Page 6 of 13
Product name: FINNDISP™ A 10 DS Emulsion Revision Date: 10.02.2020
Version: 1.0
Skin corrosion/irritation
Based on testing for product(s) in this family of materials:
Prolonged contact may cause slight skin irritation with local redness.
Sensitization
For skin sensitization:
Contains component(s) which have caused allergic skin sensitization in guinea pigs.
Page 7 of 13
Product name: FINNDISP™ A 10 DS Emulsion Revision Date: 10.02.2020
Version: 1.0
Aspiration Hazard
Based on physical properties, not likely to be an aspiration hazard.
Chronic toxicity (represents longer term exposures with repeated dose resulting in
chronic/delayed effects - no immediate effects known unless otherwise noted)
Carcinogenicity
No relevant data found.
Teratogenicity
No relevant data found.
Reproductive toxicity
No relevant data found.
Mutagenicity
No relevant data found.
Page 8 of 13
Product name: FINNDISP™ A 10 DS Emulsion Revision Date: 10.02.2020
Version: 1.0
12.1 Toxicity
Page 9 of 13
Product name: FINNDISP™ A 10 DS Emulsion Revision Date: 10.02.2020
Version: 1.0
The definitive assignment of this material to the appropriate EWC group and thus its proper EWC code
will depend on the use that is made of this material. Contact the authorized waste disposal services.
Contaminated packaging: Empty containers retain product residues. Follow label warnings even
after container is emptied. Improper disposal or reuse of this container may be dangerous and illegal.
Refer to applicable federal, state and local regulations.
Page 10 of 13
Product name: FINNDISP™ A 10 DS Emulsion Revision Date: 10.02.2020
Version: 1.0
Seveso III: Directive 2012/18/EU of the European Parliament and of the Council on the control
of major-accident hazards involving dangerous substances.
Listed in Regulation: Not applicable
Page 11 of 13
Product name: FINNDISP™ A 10 DS Emulsion Revision Date: 10.02.2020
Version: 1.0
Classification and procedure used to derive the classification for mixtures according to
Regulation (EC) No 1272/2008
This product is not classified as dangerous according to EC criteria.
Revision
Identification Number: 99163052 / A305 / Issue Date: 10.02.2020 / Version: 1.0
Most recent revision(s) are noted by the bold, double bars in left-hand margin throughout this
document.
Legend
Aquatic Chronic Long-term (chronic) aquatic hazard
Eye Irrit. Eye irritation
Page 12 of 13
Product name: FINNDISP™ A 10 DS Emulsion Revision Date: 10.02.2020
Version: 1.0
Substances Control Act (United States); UN - United Nations; vPvB - Very Persistent and Very
Bioaccumulative
DOW EUROPE GMBH urges each customer or recipient of this (M)SDS to study it carefully and
consult appropriate expertise, as necessary or appropriate, to become aware of and understand the
data contained in this (M)SDS and any hazards associated with the product. The information herein is
provided in good faith and believed to be accurate as of the effective date shown above. However, no
warranty, express or implied, is given. Regulatory requirements are subject to change and may differ
between various locations. It is the buyer's/user's responsibility to ensure that his activities comply with
all federal, state, provincial or local laws. The information presented here pertains only to the product
as shipped. Since conditions for use of the product are not under the control of the manufacturer, it is
the buyer's/user's duty to determine the conditions necessary for the safe use of this product. Due to
the proliferation of sources for information such as manufacturer-specific (M)SDSs, we are not and
cannot be responsible for (M)SDSs obtained from any source other than ourselves. If you have
obtained an (M)SDS from another source or if you are not sure that the (M)SDS you have is current,
please contact us for the most current version.
UA
Page 13 of 13