Professional Documents
Culture Documents
Operation Manual: SM-20L SM40L SM60L SM80L
Operation Manual: SM-20L SM40L SM60L SM80L
Operation Manual: SM-20L SM40L SM60L SM80L
IMPORTANT
All operators of this machine must be of legal age to operate such equipment
and must be familiar with and understand all caution labels!
IMPORTANT
Make certain that the person who is to operate this equipment carefully reads
and understands these instructions before starting operations!
-1-
WORKING SAFETY
Working Safety
The machine must be used only by personnel suitably trained for the purpose
and who has been trained in the contents of this publication.
-2-
CONTENT
Introduction••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••(4)
Operation•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••(8)
Trouble Shooting••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••(12)
Parts List••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••(14)
Wiring Diagram••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••(30)
-3-
INTRODUCTION
Introduction
The Sinmag Planetary Mixer has been designed for years of trouble-free
operation in today’s modern bakery. Every feature designed into this machine
has been carefully tested. The machine has been proven to gently handle a
wide variety of dough and produce a high quality product. It does this while
maintaining the highest standard of safety.
All the Planetary Mixer are with 10 whipping speeds, they are specially used for
mixing liquid ingredients, viscid ingredients and dough.
All the attachment and bowl which come into contact with the products are
food-grade, it can ensure that the products from the bowl has a good quality for
sanitary requirement.
The production process is electrically controlled. By means of control panel and
inverter, it is convenient for operator to shift the speed without stopping the
machine.
Owners and operators should carefully read this entire instruction manual
before attempting to operate this machine. This will familiarize you with the
proper operation and important feature of your new mixer. This will also ensure
that you receive years of safe and trouble-free operation.
All of the information, illustrations and specifications presented in this manual
are based on the latest product information available at the time of printing.
Sinmag reserves the right to make changes without notice. If questions arise
during the operation or servicing, please contact us before proceeding.
-4-
INTRODUCTION
Specification
-5-
INSTALLATION AND COMMISSIONING
Installation
After uncrating the machine, inspect it carefully to see whether there is any
damage that might have occurred during shipment. Report any damage to us
before proceeding. Never attempt to operate this machine with damaged or
inoperable parts.
The mixer is ready for installation, it should be stationed on a dry and stable
place which has enough space that allows for easy access to the units controls
and working areas, as well as to the top, front and sides for cleaning and
servicing.
Electric Connection
Before making the electric connection, read the specification on the name plate
to ensure that they match those of your power supply. Connect the electric
cables to the machine with a circuit breaker which is about 1.5m high over
ground, the ground protection should be necessary.
The electric connection cable doesn’t have a plug, so this has to be done by an
electrician who will observe all applicable safety codes and the national electric
codes.
Connect the right power supply according to the indication on the machine
nameplate. And the electric current value of your power supply must be steady,
otherwise it will do damage to the inverter.
-6-
INSTALLATION AND COMMISSIONING
Commissioning
After connecting the machine to the power supply, release the emergency stop
button to turn on the machine, lift the bowl to the top position. Then start the
mixer to see whether the machine head is rotating in the correct direction. When
looking from above, the mixing head should rotate clockwise, shown as the
arrow on the mixing head. If not, please swap any two of the three phases till it
rotates in the correct direction.
-7-
OPERATION
Agitator
When assembling an agitator, the bowl must be in the bottom position. Slip the
agitator up on the shaft and turn it until the drive pin is fixed in the bush.
To make the machine could be used for a long period with the best effect, please
read the below list carefully before proceeding to operate the machine. This list
shows the usage of different tools for mixing different ingredients. Also this list
shows the suitable speed for mixing different ingredients.
Caution: Please follow the above capicity list, do not try to overload, otherwise it
is very easy to damage the planetary mixer.
-8-
OPERATION
Control Panel
1). The left below the “Control” is speed display, green is start button,
red is stop button, and is speed shift button. During operation,
press or to increase or decrease the number on the , the number
ranges from 01 to 10 (but not circulatory), 01 is for the slowest speed, 10 is for
the fastest speed. You can change speed during the machine is running (no
need to stop the machine).
2). The right below the “Timer” is running time display, the number units is
minute. The alarm clock and or are time control button, press ,
the number on will increase from 10 to 70 (the number is a multiple of 10).
When the number on is 70, if we press , “--” will display. When we
press again, will display 10, that is the display on is a single
circulation. Press or , the number on will increase or decrease
from 01 to 99 (the number is a multiple of 1), When the number on is 01, if
we press , will display “--” (don’t circulate).
3). “On” is indication lamp for machine running condition. Ordinary light shows
the machine is in running condition with no timing; Red light flicker shows the
machine is in running condition with timing; Light off shows the machine is in
stop condition.
-9-
OPERATION
Operation Steps
1. Connect the machine to the power supply and then release the emergency
stop button to switch on the machine.
- 10 -
CLEANING AND MAINTENENCE
Cleaning
1). Use the wet cloth to clean the machine after daily use, do not wash it with a
running water.
2). Clean the bowl and agitator after daily use. And wipe up them with cloth to
keep the bowl without seeper.
3). Keep the bowl, agitator and other parts contacting with ingredient clean
before daily use.
4). Every 2 or 3 months, open the top cover board and back cover board and
clean the inside.
Maintenance
Every month:
1. Check the components to see whether they are in good condition and the
conveyor belts are in good tension.
2. Check the Condition of the power cable, replace them as is necessary.
3. As the shaking of the machine running, rescrew all the bolts every month.
4. Open the back cover board, grease the gear wheel, worm and other mesh
parts.
5. Grease the drive gear wheel, steps:
a). Remove the safety cover, and you will see an oiling hole on the planetary
head.
b). Grease the machine through filling oil hole.
c). Turn on the machine to check the machine running and noise, when it is
normal, clear the oil around the oiling hole with cloth.
d). Install the safety cover.
- 11 -
TROUBLE SHOOTING
Trouble Shooting
Item Possible reason Method
1. The agitator rotates in Check whether the any of the two Exchange any of the two
reverse direction. phases are in reverse connection. cables.
a). The ground is not horizontal and a). Select a horizontal and
plain enough. plain ground to install it.
2. Machine shakes when
operation. b). Foot pad is unstable. b). Readjust the foot pad to
enable the machine’s
stability.
a). There is something wrong with limit a). Change the limit switch.
3. The bowl still rotates switch. b). Tighten the adjusting
after the safety cover
b). The adjusting wheel doesn’t go with wheel or change it if
has been opened.
limit switch damaged.
- 12 -
TROUBLE SHOOTING
- 13 -
PARTS LIST
- 14 -
PARTS LIST
- 15 -
PARTS LIST
Part
Part Code Part Name Specification
Number
SM20L001 13SM20L-01D Top Cover
SM20L002 14SM20L-41 Safety Grid
SM20L003 14SM20L-32-00 Bowl
SM20L004 14SM20L-42 Rotating Shaft
SM20L005 14SM20L-75 Foot Mat
SM20L006 13SM20L-93 Beater
SM20L007 11SM20L-92 Hook
SM20L008 11SM40L-57qb Ingredient Chute
SM20L009 16MBLOMX-002-T Panel OMX-002EGG
SM20L010 16KGLZA2-BS54 Emergency Switch
SM20L011 16MDSM20L-1-01 Motor 230/380V-50HZ 1.1KW
SM20L012 16BPQ20L-7 Inverter
SM20L013 16KGLMEA9112G Micro Switch MEA9112
Adjusting Wheel of
SM20L014 14SM20L-43
MircoSwitch
SM20L015 14SM20L-100 Motor Pulley
SM20L016 16KGLTZ8108 Micro Switch TZ8108
SM20L017 15PDL775 Belt 7M-775
SM20L018 15PDL850 Belt 7M-850
SM20L019 13SM20L-91-01 Cover Of Shaft End
SM20L020 14SM20L-91-02 Staff
SM20L021 14A320-01 Spring
SM20L022 14SM20L-05qb Bowl Bracket
SM20L023 14200-025 Press Handle
SM20L024 14SM20L-05-03 Ring Of Press Handle
SM20L025 14SM20L-37 Cover
SM20L026 14SM20L-33 Pin
SM20L027 14201-003 Bottom Cover
SM20L028 14SM20L-90 Mandrel
SM20L029 14201-022 Gear
SM20L030 14201-160 Cover Ring
SM20L031 14201-021 Gear
SM20L032 14SM20L-45 Bearing Housing
- 16 -
PARTS LIST
- 17 -
PARTS LIST
- 18 -
PARTS LIST
- 19 -
PARTS LIST
Part
Part Code Part Name Specification
Number
SM40L001 16KGLZA2-BS54 Emergency Switch
SM40L002 16MBLOMX-002-T1 Digital Control Panel
SM40L003 13SM40L-01D Machine Top Cover
SM40L004 11SM40L-48 Safety Grid
SM40L005 14SM40L-29 Bowl
SM40L006 11SM40L-110 Hook
SM40L007 14SM40L-108 Whipping Ball
SM40L008 13SM40L-107 Beater
SM40L009 16MDL40L-1 Motor 380V-50HZ-3PH 2.2KW 6P
SM40L010 16BPQ60L-1 Invertor
SM40L011 14SM40L-12B Main Shaft
SM40L012 14SM40L-105 Planetary Shaft
SM40L013 15ZCL6205VV Bearing 6205VV
SM40L014 14401-022C Internal Pinion
SM40L015 14401-021B Internal Drive Gear
SM40L016 15PDL1060 Belt 7M-1060
SM40L017 15PDL1150 Belt 7M-1150
SM40L018 15HQL38*1/2*12 Plastic Ball Ф38
SM40L019 14SM40L-23 Machine Foot Pad
SM40L020 14SM60L-33-02 Bowl Clamp
SM40L021 14SM60L-33-03 Bowl Clamp
SM40L022 14SM40L-122 Motor Pulley
SM40L023 15ZCL6006VV Bearing 6006VV
SM40L024 11SM40LB-25B Machine Body
SM40L025 14SM40L-14 Handle
SM40L026 14SM40L-33B Screw Bolt
SM40L027 16KGLTM1307 Microswitch
SM40L028 11SM40L-57qb Chute
SM40L029 15ZCL3056208VV Bearing 3056208VV
SM40L030 15ZCL3056307VV Bearing 3056307VV
SM40L031 13SM40L-05B Bearing Housing
SM40L032 15YFL32*55*7 Oil Seal
SM40L033 14401-003 Planetary Head
SM40L034 13SM40L-04 Lock Block
SM40L035 13SM40L-22B-01 Connecting Piece 20T*225*257 Q235
SM40L036 13SM40L-04 Lock Block
SM40L037 11SM40L-90 Adjusting Plate for Motor
SM40L038 14SM40L-15B Rotating Piece
SM40L039 15ZCLGD-1 Bearing
SM40L040 14SM40L-28 Pressure Plate
SM40L041 14SM40L-11 Rubber pad
- 20 -
PARTS LIST
- 21 -
PARTS LIST
- 22 -
PARTS LIST
- 23 -
PARTS LIST
Part
Part Code Part Name Specification
Number
SM60L001 16MBLOMX-002-T1 Digital Panel OMX-006
SM60L002 16KGLZA2-BS54 Emergency Switch
SM60L003 13SM60L-01D Top Cover
SM60L004 11SM60L-48A Safety Grid
SM60L005 14SMA60L-29 Bowl
SM60L006 11SM60L-107 Hook
SM60L007 14SM60L-109 Whipping Ball
SM60L008 13SM60L-108 Beater
SM60L009 15PDL1060 Belt 7M-1060
SM60L010 15PDL1060 Belt 7M-1060
SM60L011 15BSL22*250 Handwheel
SM60L012 14SM60L-23 Foot Mat
SM60L013 14SM60L-95 Drive Belt Pulley
SM60L014 14SM60L-17B Belt Pulley
SM60L015 16KGLTM1307 Micro Switch
SM60L016 16MDL60L-01 Motor 380V-50HZ-3PH 3KW
SM60L017 16BPQ60L-1 Inverter
SM60L018 14SM60L-03 Conical Gear
SM60L019 15ZCL6005VV Bearing 6005VV UBC
SM60L020 14SM60L-65 Gear Shaft Housing
SM60L021 14SM60L-15 Small Bearing Seat
SM60L022 14SM60L-20 Screw Rod
SM60L028 14SM60L-100 Conical Gear
SM60L029 14SM60L-33-02 Press Bar
SM60L030 14SM60L-33-03 Press Bar
SM60L031 Pin
SM60L032 Bolt
SM60L033 14SM60L-12B Main Shaft
SM60L034 15ZCL3056307VV Bearing 3056307VV UBC
SM60L035 15ZCL3056208VV Bearing 3056208VV UBC
SM60L036 14SM60L-10D Shift Gear
SM60L037 Ring
SM60L038 15ZCL6206VV Bearing 6206VV UBC
SM60L039 15YFL35*62*7 Oil Seal 35*62*7
SM60L040 15ZCL6007VV Bearing 6007VV UBC
SM60L041 Key
SM60L042 14SM60L-103 Planetary Shaft
SM60L043 13SM60L-73B Bottom Cover
SM60L044 13SM60L-104-01 Shaft end Cover
SM60L045 14SM60L-104-02 Staff
SM60L046 14SM60L-104-03 Spring
- 24 -
PARTS LIST
SM60L047 Block
SM60L048 14SM60L-33-01 Screw
SM60L050 Nut
SM60L051 14SM60L-02-01 Press Board Of Handle
SM60L052 Key
SM60L053 15LZLR3 Castor
SM60L054 Shaft Block
SM60L055 14SM60L-02 Shaft Of Handle
SM60L056 Shaft Block
SM60L057 Block
SM60L058 11SM60L-94 Safety Grid Contactor
SM60L059 14SM60L-14 Bearing Seat
SM60L060 14SM60L-92 Belt Pulley
SM60L061 Ring
SM60L062 11SM60L-25B Frame
SM60L063 11SM60L-59qb Trolley
SM60L064 15ZCL51104 Bearing 51104 UBC
SM60L065 11SM40L-57qb Filler
SM60L066 15ZCL6004VV Bearing 60042RS
SM60L067 14SM60L-19 Block
SM60L068 13SM60L-28 Press Board
SM60L069 14SM60L-46B Middle Board
SM60L070 11SM60L-22-01 Guide Board
SM60L071 11SM60L-22-02 Block
SM60L072 11SM60L-21 Bowl Support
SM60L073 11SM60L-22-03 Support
SM60L074 14SM60L-46A Middle Board
SM60L075 14SM60L-72B Drive Shaft
SM60L076 Key
SM60L077 14SM60L-38 Shaft Cover
SM60L078 14SM40L-100 Ring
SM60L079 15ZCL6006VV Bearing 6006VV UBC
SM60L080 15ZCL6007VV Bearing 6007VV UBC
SM60L081 14SM60L-95 Drive Belt Pulley
SM60L082 14SM60L-05B Bearing Seat
SM60L083 14SM60L-11D Planetary internal Gear
SM60L084 Block
- 25 -
PARTS LIST
- 26 -
PARTS LIST
- 27 -
PARTS LIST
Part
Part Code Part Name Specification
Number
SM80L001 16MDL80L-1 Motor 220/380V-50HZ-3PH 4.5KW
SM80L002 15ZCL51104 Bearing 51104
SM80L003 15ZCL6004VV Bearing 60042RS
SM80L004 14SM80L-20 Screw Rod
SM80L005 15PDL8*24*560 Belt 8M*24*560L
SM80L006 16JSJ80L Motor 220/380V 0.2KW CPG
SM80L007 16DZP280101 Connecter 4PCS
SM80L008 16JDQHH52P Relay HH52P 220V (2PCS)
SM80L009 16JCQCN16-2 Contactor CU-16 24V/50HZ
SM80L010 16JCQCN18-3 Contactor CU-18 24V/50HZ
SM80L011 16JDQRHN10A-11 Thermal Relay RHN10A 1-1.5A
SM80L012 16KGLTZ8108 Microswitch
SM80L013 16KGLTM1307 Microswitch
SM80L014 14SM80L-17E Motor Pulley
SM80L015 15PDL1090 Belt 7M-1090
SM80L016 14SM80L-70E Transmission Pulley
SM80L017 15PDL1180 Belt 7M-1180
SM80L018 14SM80L-16E Pulley
SM80L019 16KGLTM1307 Microswitch
SM80L020 15ZCL6306VV Bearing 6306VV NACHI
SM80L021 15ZCL6207VV Bearing 6207VV NACHI
SM80L022 15ZCL3308AZZ Bearing 3308AVV UBC
SM80L023 15ZCL3309AZZ Bearing 3309AVV UBC
SM80L024 16KGLM22 Select Switch M22-WKW3/K20
SM80L025 16ANL03 Emergency-stop Switch M22-PV/K01 230V 6A
SM80L026 16MBLOMX-002-T2 Control Panel OMX-015
SM80L027 15ZCL6207VV Bearing 6207VV NACHI
SM80L028 15YFL50*68*9 Oil Seal 50*68*9
SM80L029 11SM40L-57qb Chute
SM80L030 11SM80L-49 Machine Rear Cover SPCC 1.2T*383.2*1070.2
SM80L031 11SM80L-59qb Trolley Q235
SM80L032 11SM80L-48 Safety Grid
SM80L033 16KGL3P20A Main Switch TO-2-1/EA/SVB
SM80L034 16ANL04 Start Button M22-D-D-X1/L10 230V 6A
SM80L035 14SM60L-33-02 Pressure Handle (Left)
SM80L036 14SM60L-33-03 Pressure Handle (Right)
SM80L037 14SM60L-23 Foot Pad Rubber
SM80L038 11SM80L-29 Bowl
SM80L039 15ZCL6008VV Bearing 6008VV NACHI
SM80L040 13SM80L-99 Beater
SM80L041 11SM80L-98 Hook
- 28 -
PARTS LIST
- 29 -
WIRING DIAGRAM
- 30 -
WIRING DIAGRAM
- 31 -
WIRING DIAGRAM
- 32 -
WIRING DIAGRAM
- 33 -