This document outlines the plan for maintaining tools and equipment at the Zamboanga Sibugay Polytechnic Institute. It lists maintenance activities that should be done daily, weekly, every 15 days, monthly, and yearly for two pieces of equipment: a construction heavy equipment and a Toyota 2-C diesel engine vehicle. The activities include checking engine components, fluid levels, electrical systems, and replacing parts like filters, fluids, and doing overhauls. The plan was prepared by an instructor and noted by the administration.
This document outlines the plan for maintaining tools and equipment at the Zamboanga Sibugay Polytechnic Institute. It lists maintenance activities that should be done daily, weekly, every 15 days, monthly, and yearly for two pieces of equipment: a construction heavy equipment and a Toyota 2-C diesel engine vehicle. The activities include checking engine components, fluid levels, electrical systems, and replacing parts like filters, fluids, and doing overhauls. The plan was prepared by an instructor and noted by the administration.
This document outlines the plan for maintaining tools and equipment at the Zamboanga Sibugay Polytechnic Institute. It lists maintenance activities that should be done daily, weekly, every 15 days, monthly, and yearly for two pieces of equipment: a construction heavy equipment and a Toyota 2-C diesel engine vehicle. The activities include checking engine components, fluid levels, electrical systems, and replacing parts like filters, fluids, and doing overhauls. The plan was prepared by an instructor and noted by the administration.
SCHOOL YEAR 2020-21 AUTOMOTIVE SEVICING NC-II PLAN OF MAITAINING TOOLS AND EQUIPMENTS: EQUIPMENT: CONSTRUCTION HEAVY EQUIPMENT ACTIVITIES: MAN DAILY WEEKLY EVERY MONTHLY YEARLY REMARKS: POWER 15th DAY 1.CHECK ENGINE IN GOOD WORKING CONDITION 2.CHECK/ INSPECT OIL LEVEL AND OIL LEAKAGE 3.CHECK /INSPECT WATER LEVEL IN THE RADIATOR/ AND LEAKAGE 4.CHECK ENGINE ELECTRICAL WIRING SYSTEM 5.CHECK FUEL SYSTEM 6.REPLACE ENGINE OIL 7.REPLACE OILFILTER 8.REPALCE FUEL FILTER 9.CHECK/ADJUST DRIVEBELT DEPLECTION 10.INSPECT/TEST ALTERNATOR FOR DAMAGE 11.INSPECT/TEST STARTER MOTOR FOR DAMAGE 12.CHECK WATER PUMP 13.OVERHAUL CARBURETOR 14.CHEK/CLEAN/REP- LACE AIR FILTER REPARED BY: NOTED:
OSWALDO M. DECHETA GLADYS A. TIONGCO Ed. D HOI (CORE)
INSTRUCTOR- II OIC- VOCATIONAL SCHOOL ADMINISTRATOR III
EQUIPMENT: VEHICLE -TOYOTA 2-C DIESEL ENGINE ACTIVITIES: MAN DAILY WEEKLY EVERY MONTHLY YEARLY REMARKS: POWER 15th DAY 1.CHECK ENGINE IN GOOD WORKING CONDITION 2.CHECK/ INSPECT OIL LEVEL AND OIL LEAKAGE 3.CHECK /INSPECT WATER LEVEL IN THE RADIATOR/ AND LEAKAGE 4.CHECK ENGINE ELECTRICAL WIRING SYSTEM 5.CHECK FUEL SYSTEM 6.REPLACE ENGINE OIL 7.REPLACE OILFILTER 8.REPALCE FUEL FILTER 9.CHECK/ADJUST DRIVEBELT DEPLECTION 10.INSPECT/TEST ALTERNATOR FOR DAMAGE 11.INSPECT/CHECK STARTER MOTOR 12.CHECK /INSPECT WATER PUMP 13.SERVICE DIESEL FUEL SYSTEM 14.CLEAN/ REPLACE AIR FILTER 15.SERVICE BRAKE SYSTEM 16.CHECK/TAP/REPLACE BRAKE FLUID 17.SERVICE CLUTCH SYSTEM 18.CHECK DIFFERENTIAL/TRANSMISION GEAR OIL LEVEL 19.CHECK TIRE AND TIRE INFLATION 20.CHECK UNDERCHASSES BODY BOLTS AND JOINTS 21.CHECK STEERING INCLINATION 22.INSPECT/REPLACE POWER STEERING FLUID PREPARED BY: NOTED:
Gas-Engines and Producer-Gas Plants
A Practice Treatise Setting Forth the Principles of Gas-Engines and Producer Design, the Selection and Installation of an Engine, Conditions of Perfect Operation, Producer-Gas Engines and Their Possibilities, the Care of Gas-Engines and Producer-Gas Plants, with a Chapter on Volatile Hydrocarbon and Oil Engines