Professional Documents
Culture Documents
DV 1000
DV 1000
DirectView 1000
Book 1 (14.3)
HM-8 Operator Interface 1-800-633-0405
Prices as of April 15, 2015. Check Web site for most current prices.
Control Systems
Installation Clip mount
4.92"
Overview
(124.9mm)
The DV-1000 is designed to snap into a CLICK PLC
rectangular cutout in a control panel or
Do-More
other surface panel. On each side of the PLCs Overview
2.64" Back 2.8"
housing there is a retention clip to keep (67mm) (71mm)
the unit in place after installation. There Do-More H2
PLC
are no provisions for mounting screws,
so if your particular application is subject 5.12" Do-More T1H
Brightness adjustment
to high amounts of vibration, this may be screw (bottom)
(130mm) PLC
a factor in your selection process. The 1.34"
4.94"
(34mm) DirectLOGIC
drawing gives the physical dimensions of (125.5mm) PLCs
the DV-1000 housing.
DirectLOGIC
The panel cut-out dimensions provide Panel cut-out DL05/06
2.65"
necessary clearance for the body of the (67.3mm) Dimensions
unit and allow the outer housing bezel DirectLOGIC
DL105
to cover the edges of the cut-out for a
nice finished appearance. The optimum 1.03" DirectLOGIC
DL205
panel thickness for using the retention (26mm)
clips is 1/16”” to 1/8”. DirectLOGIC
DV-1000CBL DL305
Cabling requirements
6.6 ft./2m DirectLOGIC
Since the DV-1000 only works with the DL405
jack. Productivity
• D4-1000CBL — connects to all DL405 3000
CPU 15-pin ports. Back Universal
Maximum cable length of 15 feet between Field I/O
the DV-1000 and the PLC is recom-
6-pin RJ12 connector Software
mended.
The DV-1000 can be connected to a Use DV-1000CBL cable for connecting to DL05, C-More
DL06, DL105, DL205, D3-350, and D4-450. HMI
DL205 or DL405 DCM, but you have to
build your own cable. C-More Micro
HMI
Back
Book 1 (14.3)
www.automationdirect.com/optimates Operator Interface HM-9