Professional Documents
Culture Documents
MON25
MON25
3-well model:
figure: well model MDZ 574
4-input data :
Stock tank oil properties at STP
TABLE 01:RESERVOIR FLUIDE PROPERTIES
Properties MW density
Measurated / 0,808
Calculated 161,61 0,809
Durin
g the deployment isotherm the reservoir fluid and as long as the pressure does not reach the PAOP
(180to190)bar ,the floculation pressure threshold, asphaltene remains in the liquid phase and there
is no flocculation of asphalts. Asphaltane instability occurs when the pressure is between the upper
onset points(P=190bar;T=750C) and the bubble point :
[pressure(150bar),temperature(1200C)]. The substance has two phases: asphalte oil. Between
the bowl point and the lower onset point, we have three phases : gas/oil/asphaltens.When the
tank pressure drops below the lower onset point the asphalt particles are completely re-
dissolved into the liquid phase where the fluid is in the diphasic zone (gas-oil).(fi
figure : PASE ENVELOPE MDZ547
:During the deployment isotherm the reservoir fluid and as long as the pressure does
not reach the PAOP (180to190)bar ,the floculation pressure threshold, asphaltene
remains in the liquid phase and there is no flocculation of asphalts. Asphaltane
instability occurs when the pressure is between the upper onset
points(P=190bar;T=750C) and the bubble point :
[pressure(150bar),temperature(1200C)]. The substance has two phases: asphalte
oil. Between the bowl point and the lower onset point, we have three phases :
gas/oil/asphaltens.When the tank pressure drops below the lower onset point the
asphalt particles are completely re-dissolved into the liquid phase where the fluid is
in the diphasic zone (gas-oil).