Professional Documents
Culture Documents
Types of Truss
Types of Truss
The function of a
truss is to provide turgidity to the skeleton. A truss is an assembly of metallic elements
(bars, rods, pipes, etc). The elements of a truss are interdependent and exert force on
one another, to survive the external load and burden. A truss is used instead of RCC and
concrete beams. Trusses are of different types with regard to their designs and shapes.
Types of Trusses:
Basically, there are two types of the truss on the basis of their design and working
mechanism.
1. Pitched Truss
2. Parallel Chord Truss
Pitched Truss:
In pitched truss, the chord (upper stringer) and bottom (the lower stringer) are not
parallel. The chord of the truss is extended outward like an arch or a cone. The extended
chord of the truss provides extra strength to the truss. The pitched trusses are used in
constructing roofs of the buildings, especially in the area of snowfall. The cone-shaped
roofs do not allow the snowfall dump on the roof while making the snowfall slip down
from the edges of the roof.
Parallel Truss:
A parallel truss is made up of the parallel chord and bottom. The chord and bottom run
straight in a parallel path. Both the stringers (chord and bottom) are interconnected by
means of struts (the connecting rods). If compared, the pitched trusses are stronger
than the parallel truss. A parallel truss is generally used instead of girders and beams.
Mixing both of the types the truss are further classified into the following types:
1. Warren Truss
2. Octet Truss
3. Prat Truss
4. Bowstring Truss
5. King post Truss
6. Lenticular Truss
7. Town’s Lattice Truss
8. Vierendeel Truss
(1). Warren Truss:
It is a very simple type of trusses, in which the truss members form a series of equilateral
triangles. These are included in the category of the parallel truss.
(2). Octet Truss:
In this type of trusses, the truss members are made up of all equivalent equilateral
triangles. This is a very complicated truss, in which each triangle is associated with the
other in multi-dimensions. This type of truss is strongest as compared to the rest of the
types. This type of trusses is designed with very high skill and is very difficult to
understand.
(3). Pratt Truss:
In 1844, the engineers of the Boston railway track designed it. Two types of members
are used in this truss. One is vertical and the other is a diagonal member. The two types
of members consecutively, follow one another. The vertical members are for
compression and the diagonal members are for responding tension.
Elements of Truss:
Almost all the trusses are made up of three fundamental components. The chord, the bottom, and the members.
1. Upper stringer in a truss is called the chord.
2. The lower stringer of the truss is called the bottom.
3. Members, also called struts are the bars, rod, and strips that connect the chord and bottom of the truss.