Preinsem Paper

You might also like

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 1

AIT PUNE

Engineering Chemistry Pre Insem Date: / /2023


Question Question M BL
No. A
1 Explain procedure for EDTA method of determining of total hardness of 5 3
water sample. Draw metal EDTA complex and give chemical reactions
involved.
2 Explain reverse osmosis with diagram, write any two advantages and 4 3
disadvantages.
3 Explain Zeolite process with diagram and reaction. 3 2
4 100 ml of an alkaline water sample requires 5.2 ml of 0.02 m HCl up to 3 3
phenolphthalein end point and 15.8 ml for methyl orange end point. Find
the type and amount of alkalinity in water sample.
Question No. OR
B
1 Describe deionization method with diagram, process, ion exchange 5 3
reactions and regeneration reactions for softening of hard water.
2 Define scale and give their reasons of formation of scale with reactions. 4 3
3 Define Hardness, Temporary hardness and Permanent hardness. 3 2
4 A zeolite bed exhausted by softening 4000 lit.of water requires 10 litres of 3 3
15% Nacl solution for regeneration calculate the hardness of water
sample.
Question No.
C
1 What is reference electrode? Give construction of calomel electrode with 5 3
labelled diagram and its representation.
2 What are ion selective electrode? Discuss the solid state and enzyme 4 3
based electrode with diagram.
3 Define the following terms:- i) Specific conductance ii) Cell constant iii) 3 2
Equivalent conductance
4 Define buffer solution. Give the procedure for Calibration of PH - meter. 3 3
Question No. OR
D
1 Draw and explain the various stages of PH metric titration curve for the 5 3
titration of Hcl Vs NaoH. Give the reaction involved in it.
2 Give the constructions of glass electrode with labelled diagram, its 4 3
representation and applications.
3 Explain why i) In weak acid and weak base conductometric titration the 3 2
conductance remains nearly constant after equivalence point.

ii) In conductometric titration of weak acid and strong base the


conductance increases till equivalence point.
4 Explain the construction of conductivity cell with labelled diagram. 3 3

You might also like