Professional Documents
Culture Documents
2 Install Shaft Seal Replacement
2 Install Shaft Seal Replacement
2 Install Shaft Seal Replacement
01 02 03
04 05 06
Page 1
CALPEDA PUMP SHAFT SEAL REPLACEMENT
07 08 09
Removal of the back pump body Shaft seal cleaning – Re-installation of the back part of
together with the old shaft seal the pump body
10 11 12
This is the new shaft seal – note Deep the grafite part in water and Deep the rotating part in water and
the left grafite part with mirror then slide it on the shaft keeping then slide it on the shaft. Push it by
finished surface and the right part the mirror finished surface towards end. It is important that this part
which is rotating with the shaft you goes back on the shaft.
Page 2
CALPEDA PUMP SHAFT SEAL REPLACEMENT
13 14 15
Use a pipe to push the rotary seal The shaft key is put is place with Now the impeller is back at its
on the shaft. The rotary seal the help of a plier place and firmly fastened with
should leave access to the shaft double nuts
key
16 17 18
Clean carefully the external seal of Before assembling the pump, it is Now the pump front body goes
the pump body important to turn the shaft for few back to its place. The overhauling
minutes in order to settle the seal is finished
parts at low speed
Page 3