Professional Documents
Culture Documents
06-fc2554 Exhaust Pressure Sensor Circuit - Data Erratic, Intermittent, or Incorrect
06-fc2554 Exhaust Pressure Sensor Circuit - Data Erratic, Intermittent, or Incorrect
Fault Code: 2554 Exhaust pressure sensor circuit - Engine power derate. Exhaust Gas Recirculator
PID(P), SID(S): P095 data erratic, intermittent, or (EGR) valve will be closed.
SPN: 1209 incorrect. An error in the exhaust
FMI: 2/2 pressure sensor signal was
Lamp: Amber detected by the ECM.
SRT:
Circuit Description:
The exhaust pressure is used by the electronic control module (ECM) to monitor the engine exhaust pressure. This
information is used by the ECM to control emissions and EGR valve operation.
Component Location:
The exhaust pressure sensor is located above the EGR cooler, on the exhaust side of the engine. Refer to Procedure
100-002 for a detailed component location view.
Shop Talk:
At key-on, before the engine is started, the readings for intake manifold pressure, barometric pressure, and exhaust
pressure are compared. This fault code occurs if the exhaust pressure sensor reading is different from the other two.
This check is only done once after the keyswitch is turned on. This fault will not occur while the engine is running.
© 2008 Cummins Inc., Box 3005, Columbus, IN 47202-3005 U.S.A. Printed from QuickServe® Online.
All Rights Reserved. Last Modified: 08-Jul-2010
File: 06-fc2554 Page 2 of 2
© 2008 Cummins Inc., Box 3005, Columbus, IN 47202-3005 U.S.A. Printed from QuickServe® Online.
All Rights Reserved. Last Modified: 08-Jul-2010