Professional Documents
Culture Documents
Takeoff Edu Group Electrical Title List
Takeoff Edu Group Electrical Title List
Takeoff Edu Group Electrical Title List
Modeling and Coordinated Control Design for The main objective of the project is
Brushless Doubly Fed Induction to eliminate unbalanced PW current,
7 TEMAPS451 Generator-Based Wind Turbine to Withstand distorted CW current and
Grid Voltage Unbalance oscillations of the PW active or
(Power Systems / Power Quality) reactive power were analyzed.
Modeling and Coordinated Control Design for The main objective of the project is
Brushless Doubly Fed Induction to eliminate unbalanced PW current,
8 TEMAPS452 Generator-Based Wind Turbine to Withstand distorted CW current and
Grid Voltage Unbalance oscillations of the PW active or
(Power Systems / Wind Power Generation) reactive power were analyzed.
Modeling and Coordinated Control Design for The main objective of the project is
Brushless Doubly Fed Induction to eliminate unbalanced PW current,
9 TEPGPS425 Generator-Based Wind Turbine to Withstand distorted CW current and
Grid Voltage Unbalance oscillations of the PW active or
(Power Systems / Power Quality) reactive power were analyzed.
Modeling and Coordinated Control Design for The main objective of the project is
10 TEPGPS426
Brushless Doubly Fed Induction to eliminate unbalanced PW current,
Z-source converter integrated dc electric spring The main objective of this project is
20 TEPGPS492
for power quality improvement in dc microgrid to improve the power quality in the
An MPC Based Algorithm for a Multipurpose The main objective of this project is
Grid Integrated Solar PV System With to control power transfer and
23 TEMAPS505 Enhanced Power Quality and PCC Voltage enhance power quality for a
Assist multipurpose grid integrated solar
(Power Systems / Solar Power Generation) PV system.
An MPC Based Algorithm for a Multipurpose The main objective of this project is
Grid Integrated Solar PV System With to control power transfer and
24 TEPGPS470 Enhanced Power Quality and PCC Voltage enhance power quality for a
Assist multipurpose grid integrated solar
(Power Systems / Solar Power Generation) PV system.
An MPC Based Algorithm for a Multipurpose The main objective of this project is
Grid Integrated Solar PV System With to control power transfer and
25 TEMAPS526 Enhanced Power Quality and PCC Voltage enhance power quality for a
Assist multipurpose grid integrated solar
(Power Systems / Power Quality) PV system.
Advanced PET Control for Voltage Sags The main objective of this project is
Unbalanced Conditions Using to eliminates the harmonics,
28 TEMAPE175
Phase-Independent VSC-Rectification balancing the currents and maintain
(Power Electronics / DC - AC Converters) the unity power factor.
Advanced PET Control for Voltage Sags The main objective of this project is
Unbalanced Conditions Using to eliminates the harmonics,
29 TEPGPE145
Phase-Independent VSC-Rectification balancing the currents and maintain
(Power Electronics / DC - AC Converters) the unity power factor.
Adaptive Power Decoupling Control for The main objective of this project is
30 TEMAPE176
Single-Phase Converter with Unbalanced to control the decoupling of adaptive
Adaptive Power Decoupling Control for The main objective of this project is
Single-Phase Converter with Unbalanced to control the decoupling of adaptive
31 TEPGPE147
DC-Split-Capacitor Circuit power with unbalanced split
(Power Electronics / DC - AC Converters) capacitor.
Analysis of Bidirectional DC-DC converter with The main objective of this project is
48 TEMAED141
Wide Voltage Gain for charging of Electric to provide high output voltage gain
Analysis of Bidirectional DC-DC converter with The main objective of this project is
Wide Voltage Gain for charging of Electric to provide high output voltage gain
49 TEMAPE198
Vehicle for Bidirectional DC-DC Converter
(Power Electronics / DC - DC Converters) for Charging of Electrical Vehicle
Analysis of Bidirectional DC-DC converter with The main objective of this project is
Wide Voltage Gain for charging of Electric to provide high output voltage gain
50 TEPGED135
Vehicle for Bidirectional DC-DC Converter
(Electrical Drives / Electrical Vehicles) for Charging of Electrical Vehicle
Analysis of Bidirectional DC-DC converter with The main objective of this project is
Wide Voltage Gain for charging of Electric to provide high output voltage gain
51 TEPGPE171
Vehicle for Bidirectional DC-DC Converter
(Power Electronics / DC - DC Converters) for Charging of Electrical Vehicle
Development of Double Closed loop Vector The main objective of the proposed
Control Using Model Predictive Control for method is to get better dynamic
70 TEMAED142
Permanent Magnet Synchronous Motor response by tracking the current
(Electrical Drives / AC Drives) and resisting the load disturbance.
Development of Double Closed loop Vector The main objective of the proposed
Control Using Model Predictive Control for method is to get better dynamic
72 TEPGED136
Permanent Magnet Synchronous Motor response by tracking the current
(Electrical Drives / AC Drives) and resisting the load disturbance.
performance.
Speed Control for SRM Drive System Based The main objective of this project is
95 TEPGED108 on Switching Variable Proportional to control the speed of Switched
Desaturation PI Regulator Reluctance Motor Drive systems
105 TEMAPS536 Multi-Mode Operation and Control of a The main objective of this project is
Z-Source Virtual Synchronous Generator in PV to improve the stability and track the
Systems frequency of the Power Electronic
(Power Systems / Power Quality) Converters.
Design and Modelling of Hybrid DC-AC The main objective of this project is
Microgrid with Manifold Renewable Energy to extract maximum power from the
125 TEMAPS558
Sources solar, wind and tidal waves at
(Power Systems / Hybrid Systems) varying conditions.
Design and Modelling of Hybrid DC-AC The main objective of this project is
Microgrid with Manifold Renewable Energy to extract maximum power from the
126 TEPGPS523
Sources solar, wind and tidal waves at
(Power Systems / Hybrid Systems) varying conditions.
Stability Evaluation of AC-DC Hybrid Micro The objective of this paper is power
grids considering Bidirectional Power Flow flow direction on the small-signal
137 TEMAPS537
through the Interlinking Converters stability of islanded droop-based
(Power Systems / Power Quality) HMGs.
Stability Evaluation of AC-DC Hybrid Micro The objective of this paper is power
138 TEPGPS502 grids considering Bidirectional Power Flow flow direction on the small-signal
through the Interlinking Converters stability of islanded droop-based
System Modeling and Stability Analysis of The main objective of this project is
Single-Phase Transformerless UPQC to exchanging reactive power
143 TEMAPS478
Integrated Input Grid Voltage Regulation between the system and the grid to
(Power Systems / Power Quality) provide input grid voltage regulation.
System Modeling and Stability Analysis of The main objective of this project is
Single-Phase Transformerless UPQC to exchanging reactive power
144 TEPGPS448
Integrated Input Grid Voltage Regulation between the system and the grid to
(Power Systems / Power Quality) provide input grid voltage regulation.
Modeling and Coordinated Control Design for The main objective of the project is
Brushless Doubly-Fed Induction to eliminate unbalanced PW current,
150 TEMAPS519 Generator-Based Wind Turbine to Withstand distorted CW current and
Grid Voltage Unbalance oscillations of the PW active or
(Power Systems / Wind Power Generation) reactive power were analyzed.
Modeling and Coordinated Control Design for The main objective of the project is
Brushless Doubly-Fed Induction to eliminate unbalanced PW current,
151 TEPGPS483 Generator-Based Wind Turbine to Withstand distorted CW current and
Grid Voltage Unbalance oscillations of the PW active or
(Power Systems / Wind Power Generation) reactive power were analyzed.
Modeling and Coordinated Control Design for The main objective of the project is
Brushless Doubly-Fed Induction to eliminate unbalanced PW current,
152 TEMAPS535 Generator-Based Wind Turbine to Withstand distorted CW current and
Grid Voltage Unbalance oscillations of the PW active or
(Power Systems / Power Quality) reactive power were analyzed.
Inertia and Damping Analysis of Grid-Tied Main objective of this project aims to
Photovoltaic Power Generation System With analyze the inertia, damping and
216 TEMAPS446
DC Voltage Droop Control synchronization characteristics of
(Power Systems / Solar Power Generation) the Grid-Tied Photovoltaic Power
Partial Power Conversion and High Voltage The main objective of this project is
Ride-Through Scheme for a PV-Battery Based to partial power conversation and
220 TEMAPS457
Multiport Multi-Bus Power Router high voltage ride through for
(Power Systems / Hybrid Systems) PV-battery energy storage system.
Partial Power Conversion and High Voltage The main objective of this project is
Ride-Through Scheme for a PV-Battery Based to partial power conversation and
221 TEMAPS458
Multiport Multi-Bus Power Router high voltage ride through for
(Power Systems / Power Quality) PV-battery energy storage system.
Partial Power Conversion and High Voltage The main objective of this project is
Ride-Through Scheme for a PV-Battery Based to partial power conversation and
222 TEMAPS459
Multiport Multi-Bus Power Router high voltage ride through for
(Power Systems / Solar Power Generation) PV-battery energy storage system.
Partial Power Conversion and High Voltage The main objective of this project is
Ride-Through Scheme for a PV-Battery Based to partial power conversation and
223 TEPGPS431
Multiport Multi-Bus Power Router high voltage ride through for
(Power Systems / Hybrid Systems) PV-battery energy storage system.
Partial Power Conversion and High Voltage The main objective of this project is
Ride-Through Scheme for a PV-Battery Based to partial power conversation and
224 TEPGPS432
Multiport Multi-Bus Power Router high voltage ride through for
(Power Systems / Power Quality) PV-battery energy storage system.
Partial Power Conversion and High Voltage The main objective of this project is
Ride-Through Scheme for a PV-Battery Based to partial power conversation and
225 TEPGPS433
Multiport Multi-Bus Power Router high voltage ride through for
(Power Systems / Solar Power Generation) PV-battery energy storage system.
PV based Shunt Active Harmonic Filter for The main objective of the project is
226 TEMAPS468
Power Quality improvement SAHF system provides harmonic
Fuzzy Logic Control for Solar PV Fed Modular The main objective of this project
234 TEPGED89 Multilevel Inverter Towards Marine Water aim to control the Induction Motor
Pumping Applications (IM) drive using intelligent
Hybrid energy storage system control The main objective of the project is
analogous to power quality enhancement enhance the power quality in grid
241 TEPGPS411
operation of interlinking converters connected system by using hybrid
(Power Systems / Power Quality) ESS.
243 TEMAED81 Battery and Super Capacitor Fed BLDC Motor Main objective of this project is to
( Page 25 ) Email: info@takeoffprojects.com
A Novel Asymmetrical 21-Level Inverter for The main objective of this project is
Solar PV Energy System With Reduced Switch to presents a novel asymmetrical
248 TEPGPE129
Count 21-level multilevel inverter topology
(Power Electronics / Multilevel Converters) for solar PV application.
Simulation and Modelling of MPPT based PV The main objective of this project is
250 TEMAPS575 System Connected with Boost Converter to obtain supreme Required amount
(Power Systems / Solar Power Generation) of power from solar PV panel
Simulation and Modelling of MPPT based PV The main objective of this project is
251 TEPGPS538 System Connected with Boost Converter to obtain supreme Required amount
(Power Systems / Solar Power Generation) of power from solar PV panel
A Lossless Turn-On Snubber for Reducing The main objective of this project is
Diode Reverse Recovery Losses in introducing a reducing diode reverse
256 TEMAPE201
Bidirectional Buck Boost Converter recovery loss in bidirectional
(Power Electronics / DC - DC Converters) buck/boost converter
A Lossless Turn-On Snubber for Reducing The main objective of this project is
Diode Reverse Recovery Losses in introducing a reducing diode reverse
257 TEPGPE174
Bidirectional Buck Boost Converter recovery loss in bidirectional
(Power Electronics / DC - DC Converters) buck/boost converter
265 TEMAPS469 A Review of Nanogrid Technologies for The objective of this paper is to
Direct Power Control of Shunt Active Power The main objective of proposed
Filter using Space Vector Modulation based on method is to compensate
280 TEPGPS506
Super Twisting Sliding Mode Control undesirable harmonic components
(Power Systems / Power Quality) caused by nonlinear loads.
Direct Power Control of Shunt Active Power The main objective of proposed
Filter using Space Vector Modulation based on method is to compensate
281 TEPGED116
Super Twisting Sliding Mode Control undesirable harmonic components
(Electrical Drives / AC Drives) caused by nonlinear loads.
Direct Power Control of Shunt Active Power The main objective of proposed
Filter using Space Vector Modulation based on method is to compensate
282 TEMAPS540
Super Twisting Sliding Mode Control undesirable harmonic components
(Power Systems / Power Quality) caused by nonlinear loads.
Direct Power Control of Shunt Active Power The main objective of proposed
Filter using Space Vector Modulation based on method is to compensate
283 TEMAED120
Super Twisting Sliding Mode Control undesirable harmonic components
(Electrical Drives / AC Drives) caused by nonlinear loads.
285 TEPGED120 An Adaptive Identification of Rotor Time The main objective is to provide a
( Page 29 ) Email: info@takeoffprojects.com
An Approach towards Extreme Fast Charging The main objective of the project is
294 TEMAED130 Station Power Delivery for Electric Vehicles to eliminate redundant power
with Partial Power Processing conversion by making use of partial
304 TEMAPS206 Wind-Speed Estimation and Sensorless Main objective of this project is
( Page 31 ) Email: info@takeoffprojects.com
Integration of Solar PV with Battery Energy The main objective of this project is
312 TEMAPS428
Storage System to design a battery charging circuit
Implementation of Solar PV- Battery and Diesel Main objective of this project is
Generator Based Electric Vehicle Charging regulating the frequency and voltage
326 TEPGPS121
Station of DG set without a mechanical
(Power Systems / Hybrid Systems) automatic voltage regulator.
Implementation of Solar PV- Battery and Diesel Main objective of this project is
Generator Based Electric Vehicle Charging regulating the frequency and voltage
327 TEPGPS122
Station of DG set without a mechanical
(Power Systems / Solar Power Generation) automatic voltage regulator.
Implementation of Solar PV- Battery and Diesel Main objective of this project is
Generator Based Electric Vehicle Charging regulating the frequency and voltage
328 TEMAPS168
Station of DG set without a mechanical
(Power Systems / Solar Power Generation) automatic voltage regulator.
Implementation of Solar PV- Battery and Diesel Main objective of this project is
Generator Based Electric Vehicle Charging regulating the frequency and voltage
329 TEMAPS169
Station of DG set without a mechanical
(Power Systems / Hybrid Systems) automatic voltage regulator.
330 TEMAPE146 Analysis, Modeling and Implementation of a Main objective of this project is to
( Page 34 ) Email: info@takeoffprojects.com
A novel single phase bidirectional electric drive The objective of this paper is
338 TEMAED93 reconstructed onboard for electric vehicles reconstructed converter is simple
(Electrical Drives / Electrical Vehicles) without specially designed motor
A novel single phase bidirectional electric drive The objective of this paper is
339 TEPGED95 reconstructed onboard for electric vehicles reconstructed converter is simple
(Electrical Drives / Electrical Vehicles) without specially designed motor
Voltage profile and power quality improvement The main objective of this project is
in photovoltaic farms integrated medium to extract the maximum power from
352 TEPGPS409
voltage grid using dynamic voltage restorer the solar and improve the power
(Power Systems / Power Quality) quality.
Solar PV-BES Based Microgrid System With Main objective of this project is
365 TEPGPS133 multifunctional VSC maximum power extraction from a
(Power Systems / Solar Power Generation) PV array, reactive power
( 374
Page 39 )TEPGPS157 Design and Analysis of Grid-Interactive DFIG MainEmail:
objective of this project is
info@takeoffprojects.com
381 TEPGCS29 Power quality enhancement in a Main objective of this project are
( Page 40 ) Email: info@takeoffprojects.com
390 TEPGPS151 Single Stage Autonomous Solar Water The main objective of this project is
( Page 41 ) Email: info@takeoffprojects.com
Design and Analysis of Electrical Braking The main objective of this project is
397 TEMAED73 Torque Limit Trajectory for Regenerative to improve the regenerative braking
Braking in Electric Vehicles With PMSM Drive of electric vehicles based on a
Systems
regenerative power analysis.
(Electrical Drives / AC Drives)
Reactive Power Optimization Control for The main objective of the project is
Bidirectional Dual-Tank Resonant DC–DC to provide a new control scheme for
410 TEPGPE65
Converters for Fuel Cells Systems reactive power optimization at a
(Power Electronics / DC - DC Converters) given active power output.
Reactive Power Optimization Control for The main objective of the project is
Bidirectional Dual-Tank Resonant DC–DC to provide a new control scheme for
411 TEMAPE78
Converters for Fuel Cells Systems reactive power optimization at a
(Power Electronics / DC - DC Converters) given active power output.
A novel cascaded control to improve stability The main objective of the project is
and inertia of parallel buck boost converters in to synchronize the output voltage at
414 TEPGPE68
DC microgrid the pcc, to improve the inertia of the
(Power Electronics / DC - DC Converters) converter-interfaced DGs.
A novel cascaded control to improve stability The main objective of the project is
and inertia of parallel buck boost converters in to synchronize the output voltage at
415 TEMAPE82
DC microgrid the pcc, to improve the inertia of the
(Power Electronics / DC - DC Converters) converter-interfaced DGs.
A New Control Strategy for Three-Phase Shunt Main objective of this project is
416 TEPGPS174
Active Power Filters Based on FIR Prediction controlling the dc-side voltage of the
Simulink
Distribution Power System
(Power Systems / Power Quality)
Multifunction Control Strategy for Single-Phase The main objective of the project is
AC/DC Power Conversion Systems with to solve instability and in accuracy
436 TEPGPE62 Voltage Sensorless Power Decoupling on power decoupling control under
Function transient conditions, and to evaluate
(Power Electronics / DC - AC Converters) accurate decoupling voltage.
Multifunction Control Strategy for Single-Phase The main objective of the project is
AC/DC Power Conversion Systems with to solve instability and in accuracy
437 TEMAPE74 Voltage Sensorless Power Decoupling on power decoupling control under
Function transient conditions, and to evaluate
(Power Electronics / DC - AC Converters) accurate decoupling voltage.
Improved Power Quality in a Solar PV Plant The main objective of the proposed
Integrated Utility Grid by Employing a Novel method is, to improve voltages and
440 TEMAPS566
Adaptive Current Regulator power quality under dynamic load
(Power Systems / Power Quality) changes.
Improved Power Quality in a Solar PV Plant The main objective of the proposed
Integrated Utility Grid by Employing a Novel method is, to improve voltages and
441 TEMAPS567
Adaptive Current Regulator power quality under dynamic load
(Power Systems / Solar Power Generation) changes.
Improved Power Quality in a Solar PV Plant The main objective of the proposed
Integrated Utility Grid by Employing a Novel method is, to improve voltages and
442 TEPGPS531
Adaptive Current Regulator power quality under dynamic load
(Power Systems / Power Quality) changes.
Improved Power Quality in a Solar PV Plant The main objective of the proposed
Integrated Utility Grid by Employing a Novel method is, to improve voltages and
443 TEPGPS532
Adaptive Current Regulator power quality under dynamic load
(Power Systems / Solar Power Generation) changes.
Comparing fuzzy rule-based MPPT techniques The main objective of this project is
538 TEMISI11
for fuel cell stack applications to compare fuzzy based MPPT
( Page 55 ) Email: info@takeoffprojects.com
( 560
Page 57 )TEREPS19_28 Control Of Single-phase Solar Power Email: info@takeoffprojects.com
Grid-connected Wind-photovoltaic
Cogeneration Using Back-to-back Voltage
584 TEMAPS02
Source Converters
(Power Systems / Solar Power Generation)
Grid-connected Wind-photovoltaic
Cogeneration Using Back-to-back Voltage
585 TEMAPS03
Source Converters
(Power Systems / Wind Power Generation)
Grid-connected Wind-photovoltaic
Cogeneration Using Back-to-back Voltage
586 TEMAPS04
Source Converters
(Power Systems / Hybrid Systems)
Grid-connected Wind-photovoltaic
Cogeneration Using Back-to-back Voltage
587 TEREPS19_02
Source Converters
(Power Systems / Solar Power Generation)
Grid-connected Wind-photovoltaic
Cogeneration Using Back-to-back Voltage
588 TEREPS19_03
Source Converters
(Power Systems / Wind Power Generation)
Grid-connected Wind-photovoltaic
Cogeneration Using Back-to-back Voltage
589 TEREPS19_04
Source Converters
(Power Systems / Hybrid Systems)
Grid-connected Wind-photovoltaic
Cogeneration Using Back-to-back Voltage
590 TEMAPE05
Source Converters
(Power Electronics / DC - AC Converters)
Grid-connected Wind-photovoltaic
Cogeneration Using Back-to-back Voltage
591 TEMAPE06
Source Converters
(Power Electronics / DC - AC Converters)
An Improved Direct Torque Control of Three The main objective of the project is
Level Dual Inverter fed Open-Ended Winding to nullify flux instability at zero
597 TEMAED82 Induction Motor Drive Based on Modified speed, proper active VVs are placed
Look-Up Table at hysteresis flux +1 and torque 0
(Electrical Drives / AC Drives) condition in modified look-up table.
Novel Circuit and Method for Fault The main objective of this project is
Reconfiguration in Cascaded H-Bridge used for fault reconfiguration in
599 TEPGPE128
Multilevel Inverters Cascaded H_bridge Multi level
(Power Electronics / Multilevel Converters) Inverters.
A new three-phase multilevel DC-link inverter The main objective of this project is
topology with reduced switch count for a new MLI topology with reduced
601 TEMAPE156
photovoltaic applications number of switches for photovoltaic
(Power Electronics / Multilevel Converters) applications.
Guaranteed Performance
(Power Electronics / DC - DC Converters)
systems
(Power Systems / Wind Power Generation)
Power Quality Improvement using Fuzzy-PI The main objective of this project is
901 TEMAPS562 Controlled D-STATCOM to improve power quality by using
(Power Systems / Power Quality) Fuzzy-PI Controlled D-STATCOM.
Power Quality Improvement using Fuzzy-PI The main objective of this project is
902 TEPGPS527 Controlled D-STATCOM to improve power quality by using
(Power Systems / Power Quality) Fuzzy-PI Controlled D-STATCOM.
Single Stage PV Array Fed Speed Sensorless The main objective of this project is
Vector Control of Induction Motor Drive for to control the induction motor for
909 TEMAED76
Water Pumping water pumping using Vector control
(Electrical Drives / AC Drives) and extract the maximum power
Common-Ground-Type Transformerless
Inverters for Single-Phase Solar Photovoltaic
939 TEPGPE113
Systems
(Power Electronics / DC - AC Converters)
Common-Ground-Type Transformerless
Inverters for Single-Phase Solar Photovoltaic
940 TEMAPE138
Systems
(Power Electronics / DC - AC Converters)
Motor Drives
(Electrical Drives / AC Drives)
1016 TEMAPS340 A Hybrid Diesel-Wind PV Based Energy The main objective of this project is
( Page 89 ) Email: info@takeoffprojects.com
Generation System with Brush Less to reduce the switching devices and
Generators control the power quality related
(Power Systems / Hybrid Systems) problems.
Use of the Genetic Algorithm-Based Fuzzy The main objective of this project is
1046 TEMACS56 Logic Controller for Load-Frequency Control in to load frequency control of Power
a Two Area Interconnected Power System Systems.
Modelling and Controller Design for The main objective of this project is
1047 TEMACS54 Temperature Control of Power Plant Heat produce sustain wide range of
Exchanger temperature and pressure.
mode.
Single-Phase Inverters
(Power Electronics / DC - DC Converters)
Simulation & Development of Inverter Fed The main objective of this project is
1228 TEMISI30 Three Phase Induction Motor Using V-f Control to control the speed of the induction
Strategy motor by using V/f control Strategy.
Inverter Operation
(Power Electronics / DC - AC Converters)
refrigerator.
Evaluation and Procedure for Estimation of The main objective of this project,
9 TEMAPS716
Interharmonics on the Example of eliminating the inter-harmonics of
( Page 116 ) Email: info@takeoffprojects.com
Evaluation and Procedure for Estimation of The main objective of this project,
Interharmonics on the Example of eliminating the inter-harmonics of
10 TEPGPS715 Non-Sinusoidal Current of an Induction Motor the current of an asynchronous
with Variable Periodic Load electric motor operation at a variable
(Power Systems / Distribution Systems) periodic load.
Implementation of Three Phase Photo Voltaic The main objective of this project is
(PV) Integrated Unified Power Quality to improved power quality in the
15 TEMAPS706
Conditioner (UPQC) three phase photo voltaic System by
(Power Systems / Power Quality) using UPQC
Implementation of Three Phase Photo Voltaic The main objective of this project is
(PV) Integrated Unified Power Quality to improved power quality in the
16 TEMAPS707
Conditioner (UPQC) three phase photo voltaic System by
(Power Systems / Solar Power Generation) using UPQC
Implementation of Three Phase Photo Voltaic The main objective of this project is
(PV) Integrated Unified Power Quality to improved power quality in the
17 TEPGPS705
Conditioner (UPQC) three phase photo voltaic System by
(Power Systems / Power Quality) using UPQC
Implementation of Three Phase Photo Voltaic The main objective of this project is
(PV) Integrated Unified Power Quality to improved power quality in the
18 TEPGPS706
Conditioner (UPQC) three phase photo voltaic System by
(Power Systems / Solar Power Generation) using UPQC
A Bipolar Voltage Gain Boost AC-AC Converter The main objective of the project is
19 TEMAPE253
Based on Four Switching Transistors bi polar gain boost ac-ac converter
A Bipolar Voltage Gain Boost AC-AC Converter The main objective of the project is
20 TEPGPE225 Based on Four Switching Transistors bi polar gain boost ac-ac converter
(Power Electronics / DC - AC Converters) based on four switching transistors
Small Signal Stability Analysis Oriented Design The main objective of this project is
of Hybrid Anti-Islanding Protection Technique to protect the distribution generators
29 TEMAPS500
Based on Active Disturbance Injection when it is connected in the
(Power Systems / Microgrids) anti-islanding mode.
Small Signal Stability Analysis Oriented Design The main objective of this project is
of Hybrid Anti-Islanding Protection Technique to protect the distribution generators
30 TEPGPS465
Based on Active Disturbance Injection when it is connected in the
(Power Systems / Microgrids) anti-islanding mode.
Analysis and Design of Hybrid Harmonic The main objective of this project is
Suppression Scheme for VSG Considering to investigate the system stability
37 TEPGPS491
Nonlinear Loads and Distorted Grid and its robustness to parameter
(Power Systems / Power Quality) perturbations.
A New Discrete Four Quadrant Control The main objective of this project is
39 TEPGPE144 Technique for Grid-Connected Full-Bridge to reduces the current ripples in the
AC–DC Converters system
Online estimation method of DC-link capacitors The main objective of this project is
46 TEMAED99 for reduced DC-link capacitance IPMSM Drives to extend the life time and to save
(Electrical Drives / AC Drives) the cost of the PMSM drives
Online estimation method of DC-link capacitors The main objective of this project is
47 TEPGED99 for reduced DC-link capacitance IPMSM Drives to extend the life time and to save
(Electrical Drives / AC Drives) the cost of the PMSM drives
A Novel DC-Link Voltage feedback Active The main objective of this project is
Damping Control Method for IPMSM Drives to reduce the digital control delay
48 TEMAED101
with Small DC-Link Capacitors and improve the damping current
(Electrical Drives / AC Drives) precision.
A Novel DC-Link Voltage feedback Active The main objective of this project is
Damping Control Method for IPMSM Drives to reduce the digital control delay
49 TEPGED101
with Small DC-Link Capacitors and improve the damping current
(Electrical Drives / AC Drives) precision.
synchronous machine.
Fault Tolerant Sensorless Control Strategy The main objective of this project to
With Multi-States Switching Method for overcome the faults of the
55 TEMAED112
In-Wheel Electric Vehicle wheel-side position sensor make
(Electrical Drives / Electrical Vehicles) motor torque out of control.
Active Fault Current Limitation for Low-Voltage The main objective of this project is
57 TEPGPS466 Ride-Through of Networked Microgrids to improve the voltage control
(Power Systems / Microgrids) ability of LVRT, the CCG strategy
Active Fault Current Limitation for Low-Voltage The main objective of this project is
58 TEMAPS501 Ride-Through of Networked Microgrids to improve the voltage control
(Power Systems / Microgrids) ability of LVRT, the CCG strategy
A Novel Unified Controller for Grid-Connected The main objective of this project is
60 TEPGPS469
and Islanded Operation of PV-Fed to proportional power sharing
Weak Grid Integration of a Single-Stage Solar The main objective of this project is
Energy Conversion System with Power Quality to power quality improvement under
77 TEMAPS522 Improvement Features under Varied Operating varied operating conditions for weak
Conditions grid integration of a single- stage
(Power Systems / Power Quality) solar energy conversion system.
Weak Grid Integration of a Single-Stage Solar The main objective of this project is
Energy Conversion System with Power Quality to power quality improvement under
78 TEPGPS486 Improvement Features under Varied Operating varied operating conditions for weak
Conditions grid integration of a single- stage
(Power Systems / Power Quality) solar energy conversion system.
Improved Gaussian Filter based Solar PVBES The main objective of this project is
79 TEMAPS524
Microgrid with PLL based Islanding detection to improve the dynamic
Analysis and Design of Hybrid Harmonic The main objective of this project is
Suppression Scheme for VSG Considering to investigate the system stability
81 TEPGPS490
Nonlinear Loads and Distorted Grid and its robustness to parameter
(Power Systems / Power Quality) perturbations.
89 TEPGPS500 An Improved Deadbeat Control Strategy Based The main objective of this project is
( Page 124 ) Email: info@takeoffprojects.com
Impacts of Grid Voltage Harmonics Amplitude The main objective of this project is
and Phase Angle Values on Power Converters to improve the power quality and
91 TEPGPS504
in Distribution Networks reduce the harmonics in distribution
(Power Systems / Power Quality) networks.
Low-Voltage Ride Through Strategy for MMC The main objective of this project is
98 TEMAPE171
With Y0-Y0 Arrangement Transformer Under to deliver the power without
Single-Line-to-Ground Fault
interruptions in the supply.
(Power Electronics / Multilevel Converters)
108 TEPGPE151 A Hysteresis Space Vector PWM for PV Tied The main objective of this project is
( Page 126 ) Email: info@takeoffprojects.com
A Non-Inverting High Gain DC-DC Converter The main objective of this project is
115 TEMAPE188 With Continuous Input Current to increases the efficiency and
(Power Electronics / DC - DC Converters) reduces the cost.
A Non-Inverting High Gain DC-DC Converter The main objective of this project is
116 TEPGPE162 With Continuous Input Current to increases the efficiency and
(Power Electronics / DC - DC Converters) reduces the cost.
Simplified Predictive Stator Current Phase The main objective of this project is
Angle Control of Induction Motor with a to obtain the good dynamic
123 TEMAED115
Reference Manipulation Technique response and to control the phase
(Electrical Drives / AC Drives) angle in the drive applications.
Simplified Predictive Stator Current Phase The main objective of this project is
Angle Control of Induction Motor with a to obtain the good dynamic
124 TEPGED112
Reference Manipulation Technique response and to control the phase
(Electrical Drives / AC Drives) angle in the drive applications.
New switched capacitor based boost inverter The main objective of this paper is
129 TEMAPE196
topology with reduced switch count to evaluate the proposed system in
( Page 128 ) Email: info@takeoffprojects.com
Hybrid Propulsion Motor Drives Model based The main objective of this project is
on Multi-level Inverters with Optimized Fuel to propose a modulation scheme for
135 TEMAPE256
Economy multilevel Inverter for BLDC Motor
(Power Electronics / Multilevel Converters) Drive Applications.
Hybrid Propulsion Motor Drives Model based The main objective of this project is
on Multi-level Inverters with Optimized Fuel to propose a modulation scheme for
136 TEMAED186
Economy multilevel Inverter for BLDC Motor
(Electrical Drives / AC Drives) Drive Applications.
Hybrid Propulsion Motor Drives Model based The main objective of this project is
on Multi-level Inverters with Optimized Fuel to propose a modulation scheme for
137 TEPGPE228
Economy multilevel Inverter for BLDC Motor
(Power Electronics / Multilevel Converters) Drive Applications.
Hybrid Propulsion Motor Drives Model based The main objective of this project is
on Multi-level Inverters with Optimized Fuel to propose a modulation scheme for
138 TEPGED180
Economy multilevel Inverter for BLDC Motor
(Electrical Drives / AC Drives) Drive Applications.
A Hybrid Nine-level Inverter Topology with The main objective of this project is
Boosting Capability and Reduced Component propose a hybrid Nine-level Inverter
139 TEMAPE255
Count Topology with Boosting Capability
(Power Electronics / Multilevel Converters) and Reduced Component Count.
A Hybrid Nine-level Inverter Topology with The main objective of this project is
Boosting Capability and Reduced Component propose a hybrid Nine-level Inverter
140 TEPGPE227
Count Topology with Boosting Capability
(Power Electronics / Multilevel Converters) and Reduced Component Count.
Controller Design and Implementation of Solar The main objective of the project is
159 TEPGPE71 Panel Companion Inverters to improve dynamic response and
(Power Electronics / Multilevel Converters) extract maximum power from the
Adaptive d-Axis Current Control of RSyM for The main objective of this project is
Photovoltaic Water Pumping Incorporating improving the efficiency of the
177 TEMAED35
Cross Saturation motor, maximization of drive
(Electrical Drives / AC Drives) efficiency and minimization of stator
copper losses
Analysis on Protective Coordination between The main objective of this project is,
Over-Current Relays with Voltage Component to provide protection coordination
202 TEPGPS190
in a Power Distribution System with SFCL between the OCRs and Distribution
(Power Systems / Distribution Systems) System with SFCL.
Analysis on Protective Coordination between The main objective of this project is,
Over-Current Relays with Voltage Component to provide protection coordination
203 TEMAPS229
in a Power Distribution System with SFCL between the OCRs and Distribution
(Power Systems / Distribution Systems) System with SFCL.
Radial basis function neural network based The main objective of this project is
maximum power point tracking for photovoltaic to regulate voltage ripples, current
215 TEPGCS25
brushless DC motor connected water pumping ripples, average power losses and
system increase the system's efficiency.
Radial basis function neural network based The main objective of this project is
maximum power point tracking for photovoltaic to regulate voltage ripples, current
217 TEMACS31
brushless DC motor connected water pumping ripples, average power losses and
system increase the system's efficiency.
231 TEPGPE53 A Selective Power Droop Control for Hybrid Main objective of this project is to
( Page 139 ) Email: info@takeoffprojects.com
Improved dynamic response strategy with dual The main objective of the project is
240 TEMAPE79 phase-shift control for dual-active-bridge to improve system performance by
DC–DC converter eliminating DC bias caused by
250 TEPGPS129 Grid-Connected PV System with Reactive The main objective of this project is
( Page 141 ) Email: info@takeoffprojects.com
system.
An Efficient High Voltage Gain Using The main objective of this project is
Two-Stage Cascaded Interleaved Boost to extract the maximum power from
262 TEPGPS150 Converter for Solar PV System with MPPT the PV system and to provide a high
Technique voltage output with less ripple
(Power Systems / Solar Power Generation) voltage for solar applications.
An Efficient High Voltage Gain Using The main objective of this project is
Two-Stage Cascaded Interleaved Boost to extract the maximum power from
263 TEPGPE45 Converter for Solar PV System with MPPT the PV system and to provide a high
Technique voltage output with less ripple
(Power Electronics / DC - DC Converters) voltage for solar applications.
An Efficient High Voltage Gain Using The main objective of this project is
Two-Stage Cascaded Interleaved Boost to extract the maximum power from
264 TEMAPS194 Converter for Solar PV System with MPPT the PV system and to provide a high
Technique voltage output with less ripple
(Power Systems / Solar Power Generation) voltage for solar applications.
An Efficient High Voltage Gain Using The main objective of this project is
Two-Stage Cascaded Interleaved Boost to extract the maximum power from
265 TEMAPE57 Converter for Solar PV System with MPPT the PV system and to provide a high
Technique voltage output with less ripple
(Power Electronics / DC - DC Converters) voltage for solar applications.
A Voltage Support Control Strategy for Grid Main objective of this project is
integrated Solar PV System During Abnormal control of active and reactive
276 TEPGPS120
Grid Conditions Utilizing Interweaved GI powers being fed into the grid
(Power Systems / Solar Power Generation) network depending on requirements
285 TEMAPS181 Grid Synchronization of WEC-PV-BES Based Main objective of this project is to
( Page 145 ) Email: info@takeoffprojects.com
( 292
Page 146TEMAPE61
) Operation and Control of a Hybrid Coupled MainEmail:
objective of this project is to
info@takeoffprojects.com
An Improved SEPIC- Based Single Switch The main objective of the project is
Buck-Boost PFC Converter Fed Brushless DC to obtain high efficiency operation of
338 TEMAPE80
Motor Drive BLDC motor by reducing source
(Power Electronics / DC - DC Converters) current THD.
Electric Drive Based on an Open-End Winding The main objective of this project is
Surface PM Synchronous Machine With a to compensate for the reactive
344 TEMAED28
Floating Capacitor Bridge power of the main inverter and to
(Electrical Drives / AC Drives) maximize the active power received
PV-Wind and Hybrid Energy Storage Integrated Main objective of this project is to
Multi-Source Converter Configuration based regulate, boost the voltage and to
385 TEMAPS423
Grid-interactive Microgrid maintain power sharing among the
(Power Systems / Hybrid Systems) battery and super capacitor.
PV-Wind and Hybrid Energy Storage Integrated Main objective of this project is to
Multi-Source Converter Configuration based regulate, boost the voltage and to
386 TEPGPS394
Grid-interactive Microgrid maintain power sharing among the
(Power Systems / Hybrid Systems) battery and super capacitor.
PV-Wind and Hybrid Energy Storage Integrated Main objective of this project is to
Multi-Source Converter Configuration based regulate, boost the voltage and to
387 TEMAPE151
Grid-interactive Microgrid maintain power sharing among the
(Power Electronics / DC - AC Converters) battery and super capacitor.
388 TEPGPE124 PV-Wind and Hybrid Energy Storage Integrated Main objective of this project is to
A Systematic Approach via IIR Filters for Main objective of this project to
Enhancing the Robustness of LCL-Type Shunt enhance the robustness of the grid
397 TEPGPS179
Active Power Filters to Grid Impedance impedance, automatically adjusted
(Power Systems / Power Quality) the components of PCC voltage.
A Systematic Approach via IIR Filters for Main objective of this project to
Enhancing the Robustness of LCL-Type Shunt enhance the robustness of the grid
398 TEMAPS218
Active Power Filters to Grid Impedance impedance, automatically adjusted
(Power Systems / Power Quality) the components of PCC voltage.
407 TEMACS42 Neuro Fuzzy Logic Controlled Parallel Main objective of this project is to
( Page 159 ) Email: info@takeoffprojects.com
LCL Filter Design for Grid Connected The main objective of this project is
431 TEMAPS717 Three-Phase Inverter to design a LCL filter for grid
(Power Systems / Power Quality) connected three phase inverter.
LCL Filter Design for Grid Connected The main objective of this project is
432 TEPGPS716 Three-Phase Inverter to design a LCL filter for grid
(Power Systems / Power Quality) connected three phase inverter.
Fuzzy Based Controller for Bi-directional The main objective of this project is
437 TEPGPS697 Power Flow Regulation for Integration of to regulate the bidirectional power
Electric Vehicles to PV based DC Micro- Grid flow by using the Fuzzy based
Model Predictive Direct Power Control of The main objective is to control the
Doubly Fed Induction Generators under power of high performance DFIG
441 TEPGED123
Balanced and Unbalanced Network Conditions under both balanced and
(Electrical Drives / AC Drives) unbalanced network.
Model Predictive Direct Power Control of The main objective is to control the
Doubly Fed Induction Generators under power of high performance DFIG
442 TEMAED127
Balanced and Unbalanced Network Conditions under both balanced and
(Electrical Drives / AC Drives) unbalanced network.
Model Predictive Direct Power Control of The main objective is to control the
Doubly Fed Induction Generators under power of high performance DFIG
443 TEPGPS507
Balanced and Unbalanced Network Conditions under both balanced and
(Power Systems / Wind Power Generation) unbalanced network.
Model Predictive Direct Power Control of The main objective is to control the
Doubly Fed Induction Generators under power of high performance DFIG
444 TEMAPS541
Balanced and Unbalanced Network Conditions under both balanced and
(Power Systems / Wind Power Generation) unbalanced network.
Power Conditioning
(Power Electronics / Multilevel Converters)
Process
(Power Electronics / DC - AC Converters)
Power System
(Power Systems / Hybrid Systems)
Conversion System
Design and Implementation of Improved Three The main objective of this project is
Port Converter and B4-Inverter Fed Brushless aims to provide efficient and reliable
736 TEMAED193 Direct Current Motor Drive System for power conversion and BLDC motor
Industrial Applications control for various industrial
(Electrical Drives / AC Drives) applications.
Design and Implementation of Improved Three The main objective of this project is
Port Converter and B4-Inverter Fed Brushless aims to provide efficient and reliable
737 TEPGED187 Direct Current Motor Drive System for power conversion and BLDC motor
Industrial Applications control for various industrial
(Electrical Drives / AC Drives) applications.
Dual-Bridge LLC Resonant Converter with The main objective of this project is
745 TEPGPE223
Fixed-Frequency PWM Control for Wide Input to propose dual active bridge LLC
Split-Source Inverters
(Power Electronics / DC - AC Converters)
Integration of photovoltaic energy into the The main objective of this paper is
826 TEMAPS556 electrical network using a multi-level(three level to reduce no. of. Power switches
SVPWM) inverter with Z source and the reduction of system cost
Load Frequency Control in Single Area System The main objective of the system is
830 TEMACS57 Using Model Predictive Control and Linear to control the load frequency in a
Quadratic Gaussian Techniques single area system