Professional Documents
Culture Documents
Creo 5.0 Enhancement Summary Deck
Creo 5.0 Enhancement Summary Deck
0
ENHANCEMENT SUMMARY DECK
CREO PARAMETRIC, EXTENSIONS
AND NEW PRODUCTS
March 2018
Multi-CAD CAID CAD CAM CAE
PTC CREO SOLUTIONS
PTC Creo Solutions
Consolidation and
Collaboration
Concept Design 2D Design 3D Design Tooling Design Manufacturing Simulation
Silent Uninstall
– New option to view the progress of the uninstall
(does not uninstall Creo Schematics)
Uninstall
– Uninstall one or all Creo applications at the same
time
© 2016 PTC
3
CREO PARAMETRIC – USABILITY
Creo 5.0 Enhancement Summary
Model tree column display
– Users will have the ability to setup the model
tree column width
• Lock Model Tree width to defined value
• No longer need to save tree settings and
define config.pro
• Using the tree file (*.cfg) will overwrite any
Model Tree Settings
• Works in most areas of Creo
– Quickly expand and collapse model tree
columns
© 2016 PTC
4
CREO PARAMETRIC – USABILITY
Creo 5.0 Enhancement Summary
Simple search in model tree
– Simple Search will be available in all
modes of Creo by default
• Provide dynamic search when inputting
text
• Users will be able to switch from filtering
to searching
• Simple search will be using normal syntax
• Include various defined query states
© 2016 PTC
5
CREO PARAMETRIC – USABILITY
Creo 5.0 Enhancement Summary
Mechanism Diagnostics
– Detailed diagnostics and resolution suggestions during
Mechanism failures
• The model is disconnected as result of regeneration
• The mechanism analysis fails to connect
• The mechanism fails during dragging
– Access depends on failure type
• Details button
– pmech_conn.err errors caused by drag, analysis failure etc.
• Notification center
– pmech_conn_regen.err errors caused by regeneration
© 2016 PTC
6
CREO PARAMETRIC – PART MODELING
Creo 5.0 Enhancement Summary
New volume helical sweep
– Create accurate 3D geometric
representations for parts machined with
cutting
tools instead of 2D sweep approximations
– The cutting tool is represented by an axis-
symmetric shape defined
by a revolved section
• Material is remove where it intersects the
part along the trajectory
© 2016 PTC
7
CREO PARAMETRIC – PART MODELING
Creo 5.0 Enhancement Summary
Round handling in draft
– Easily apply drafts to design models containing rounds and chamfers
– Apply drafts to imported models with rounds and chamfers
• Rounds and chamfers are automatically detected, removed and
(optionally) recreated after draft is applied
© 2016 PTC
8
CREO PARAMETRIC – PART MODELING
Creo 5.0 Enhancement Summary
Point pattern workflow improvements
– Smarter default solution for point pattern workflows requiring
alternate origin definition
– Auto-detection of typical alternate origin situations
• Pattern leader referencing a point in point pattern array
• Point pattern members get correctly aligned with the lead member
– Improved UI and graphics interaction for alternate origin option
Sketch regions
– Quickly create geometry with selected sketch-based features
– Eliminate the need to perform Project and Trim operations within sketcher
© 2016 PTC
9
CREO PARAMETRIC – PART MODELING
Creo 5.0 Enhancement Summary
Enhanced mini toolbars
– Intuitive, easy to learn and easy to use workflows
© 2016 PTC
10
CREO PARAMETRIC – PART MODELING
Creo 5.0 Enhancement Summary
Design in perspective
– New option to design in Perspective View
• Model Display > Display Mode Option
• Configuration option: display_mode=Orthographic*/Perspective
© 2016 PTC
12
CREO PARAMETRIC – SHEET METAL DESIGN
Creo 5.0 Enhancement Summary
Closed section for bend relief
– Supported closed section for bend relief types
• Rectangular
• Obround
Blind Blind To Next Through All
– Control the length of shape
• Blind, To Next, Through All
© 2016 PTC
13
CREO PARAMETRIC - FREESTYLE DESIGN
Creo 5.0 Enhancement Summary
Align to Non-G2 Chains
– Ability to align edge of control mesh to a non-G2 chain
• Split resulting geometry into defined sections upon exiting of Freestyle
• Supports position and normal position surface connection
Align Curvature Connection
– Align one or more edges on the control mesh to external geometry
• Toggle between the different align types to select the preferred alignment
• Easily flip direction of the Flip direction curvature connections
• Connection glyph shows curvature alignment
Import preview
– Quick preview of OBJ file control mesh prior to import
• Review the imported object, before creating the Freestyle geometry
• Access import options to control facet units and normal direction of the control mesh
– Import mesh will be listed in the Freestyle Tree
• Yellow marker indicates preview state
© 2016 PTC
14
CREO PARAMETRIC - FREESTYLE DESIGN
Creo 5.0 Enhancement Summary
Slice mesh by plane
– Slice one or more Freestyle shape into two or more separate shapes
• If an edges/faces is selected – Mesh Slice will slice a shape by a loop of
edges or a set of faces
• If a shape is selected – Mesh Slice will slice by a selected datum plane
– Easily restore Freestyle symmetry
• Using a symmetry plane, slice the mesh in half, remove one of the
halves and recreate symmetrical shape
Enable box creation mode
– New display mode to rapidly create control mesh topology
• Toggle between shading the control mesh and B-spline sub-divisional surface
• Icon displayed in the new in-graphics-toolbar
– When in Box mode, users will have full creation and modification control
• The only difference is the display will be the shaded control mesh (not the surface)
© 2016 PTC
15
CREO PARAMETRIC – DETAILING AND MBD
Creo 5.0 Enhancement Summary
Semantic query model
– Query models per ASME & ISO standards
– Easily obtain semantic information related to annotations
• Ex: Geometry, Annotation, GTOL, Datum feature
• Choose the desire response from the dialog
New datum feature symbol attachment option
– Place datum feature symbol on GTOLs that are placed on dimensions
• Improved support for ISO 5459-2011 and ASME Y14.41-2009
Mini toolbar for annotations
– Intuitive context-sensitive command access for annotations
– Consistent toolbar for MBD and detailing
– WYSIWYG customization
Radial dimension arrow display
– Improved creation and display of default arrow states
• Intuitive and predictable creation (display) of
radial dimensions based on cursor location
• Flexible flip control workflows for arrow states
© 2016 PTC
16
CREO PARAMETRIC – DETAILING AND MBD
Creo 5.0 Enhancement Summary
Improve Undo and Redo support
– Improved undo/redo support for annotation creation and modification
– Easily revert to previous work states during annotation creation and modification
• Undo/redo when creating, deleting or moving graphics
Improve failure notifications for 3D annotations
– Notification is improved for 3D annotations
• Dimensions, GTOLs, Datum features, Datum targets, etc.
– Improved graphical display of missing references (color coded)
• Easy to diagnose failure and cause
Refinement to MBD combination states
– Improved visibility status of axis for all combination states
– Improved axis assigment to/removal from MBD combination states
– Models created earlier will have axis removed from semi-MBD states
– Re-introduced config option: visible_annotations_scope
17
CREO PARAMETRIC – DETAILING AND MBD
Creo 5.0 Enhancement Summary
Creating derivatives of the MBD Model
– Creo View Publishing Options
• Choose combination states to publish
• Choose the default state for Creo View
– Combination State Printing
• Choose which combination states to print
• Define a drawing format to be applied to the print
– Parameter callouts populated during print
– STEP AP242 e1
• Creo 4.0 F000 & M010 – Graphical Annotations
• Creo 4.0 M020 – Semantic Annotations
– Core Semantic PMI representation – Part only
» Imported files containing core semantics PMI will
be added as parameter information on the annotation
» Exported files will contain ‘real’ core semantic
© 2016 PTC
18
CREO PARAMETRIC – DETAILING
Creo 5.0 Enhancement Summary
Improved large assembly performance
– Creo 4.0 introduced multi-threaded algorithms to speed
hidden line removal (HLR) in detailed drawings
– In Creo 5.0, HLR multi-threading was optimized to address
large assembly drawings
Duplicate draft datum feature symbol checks
– New check for duplicate draft datum feature symbols
• Eliminates duplicate datum feature symbol names
Crosshatching config option and menu update
– Creo Parametric (.xch) and Universal crosshatch (.pat) formats
are both accessible from the MOD XHATCH menu
– Controls the default crosshatch pattern file type to use in models
and drawings
– New configuration option: default_hatch_type xch/pat
• XCH: Creo Parametric proprietary crosshatching format
• PAT: Universal crosshatching format
© 2016 PTC
19
CREO PARAMETRIC – DETAILING
Creo 5.0 Enhancement Summary
Mini toolbar in detailed drawing
– Intuitive context-sensitive command access for
2D Annotations and Drawing objects
– WYSIWYG customization
Radial dimensions
– Better default arrow states for radial dimensions
• Evaluated depending on cursor position
• More visual and predictive arrow states during creation of radial dimensions
• Flexible flip control workflows for arrow states
20
CREO PARAMETRIC – DETAILING
Creo 5.0 Enhancement Summary
Rotating Notes
– Improved snapping behavior for Notes rotation
– Press SHIFT to snap rotation angle in user-defined angle intervals
ISO compliant leader notes
– New Detail option default_note_leader_type for ISO-compliant
representation of leader notes
More flexible layer control
– Detail option: Ignore_model_layer_status – support a new value “all”
– New behavior: model layer status is ignored, including the hidden items layer
Extended compatibility for printer configuration files
– Plot functionality supports extended compatibility for printer configuration files (.pcf)
that specify a specific rotation and that were created in Creo 3.0 M090 and earlier.
– Control behavior in .pcf file
• Set rotate_plotting to yes:
Automatic rotation is disabled and rotation logic corresponding to Creo 3.0 M090 and earlier is enabled
• Set rotate_plotting to no:
Standard out-of-the-box plot configuration occurs.
© 2016 PTC
21
CREO PARAMETRIC - CREO ELEMENTS/DIRECT
INTEROPERABILITY
Creo 5.0 Enhancement Summary
Transfer of CED configuration to explode state/combined state
– Directly leverage configurations defined in Creo Elements/Direct
• Supports of multiple configurations for an assembly
• Supports model “orientation” of configuration if defined
• Supports “show/hide” of components if defined
22
CREO PARAMETRIC – WINDCHILL INTERACTION
Creo 5.0 Enhancement Summary
Hide Revise and Check Out
– New client side disable Revise and Check out option
• Configuration option: dm_enable_revise_and_check_out
– Yes - "Revise and Check out" is visible (default)
– No - "Revise and Check out" is invisible
– Removing Revise and Checkout will remove command from
• File > Check in
• Model tree right click
Common Name
– Usability Improvement of Common Name input field
• Show “Generated” as a value upon new model creation if the value
is going to be assigned by Windchill preference
• Gray out the Common Name input field if specified as not editable
in Windchill Object Initialization Rule
23
CREO PARAMETRIC – CERTIFICATION WITH WINDCHILL
Creo 5.0 Enhancement Summary
Cairo 11.0 M030 CPS 08
– March 2018
– Support for features available in Creo 4.0 only
– Creo 5.0 new features will not be supported
• Embedded components will be supported with visualization limitations
24
CREO DATA MANAGEMENT COMPATIBILITY ROADMAP
with Windchill (Pro/INTRALINK2, PDMLink, and ProjectLink)
Windchill Windchill Windchill Windchill
Windchill
10.0 10.1 10.2 11.0 11.1
Click here for details Click here for Click here for Click here for
Click here for details
details details details
1 For information related to specific Creo App support refer to page 2 in this document.
2 Pro/INTRALINK does not support the following Creo Applications: Creo Sketch, Illustrate, or Options Modeler.
This information may be out of date. Please check here for the latest version. 25
CREO EXTENSIONS AND
PRODUCTS
26
CREO DIRECT
Creo 5.0 Enhancement Summary
Round and chamfer handling in draft
– Easily apply drafts to design models containing rounds and chamfers
– Draft surfaces of imported models with rounds or chamfers
27
CREO INTERACTIVE SURFACE DESIGN EXTENSION (ISDX)
Creo 5.0 Enhancement Summary
Mini toolbar in Style
– Provide access to frequently performed actions in Style
• Similar workflow as implemented in Creo Parametric
– Available when selecting geometry, hovering over geometry or by
pressing the RMB on geometry (i.e., surfaces, curves)
– Fully customizable
© 2016 PTC
28
CREO INTERACTIVE SURFACE DESIGN EXTENSION (ISDX)
Creo 5.0 Enhancement Summary
Flip soft point command
– Automatically flip soft point parameters and tangent direction
• Automate the manual process for updating a Style curve that loses it references
due to reference edge inverting flipping it orientation
© 2016 PTC
29
CREO INTELLIGENT FASTENER EXTENSION (IFX)
Creo 5.0 Enhancement Summary
Support for Heli-coils
– Sample heli-coil library provided OOTB
– Fastener dialog provides graphical preview
– Hole for heli-coil created automatically
– Set configuration option Hole_parameter_file_path to \\Common Files\afx\text\hole
© 2016 PTC
30
CREO PIPING AND CABLING EXTENSION (PCX)
Creo 5.0 Enhancement Summary (Cabling)
Vertical and horizontal stripes
– Full placement control over stripe creation
(i.e., orientation, angle, position, width, gap, tile, symmetrical)
– Support Creo Schematics
Spool assignment
– Spool Parameter “color”
– Must match the name of the striped appearance
– If color is not available cable color is default gray
Standard library
– Two configuration options
• Cable_stripes_pattern_file
– Sets the path to the cable striped csv file
– Can reside on local disk, Windchill or shared server
• Edit_cable_stripes_pattern_file
– No - User can only use patterns created and defined by the administrator.
– Yes - Define new patterns, copy patterns, rename pattern, delete pattern, etc.
31
CREO PIPING AND CABLING EXTENSION (PCX)
Creo 5.0 Enhancement Summary (Piping)
Remove Pipe Segments
– Simplified Process to
• Route pipes to define connectivity and path
• Optimize pipe to reduce Manufacturing costs
• Optimize Pipelines created prior to Creo 5.0
– Flexibility to remove the pipe segment or reduce the length
Automatic Connections
– Pipe segments are automatically created to accommodate change
© 2016 PTC
33
CREO CLEARANCE AND CREEPAGE EXTENSION (CCX)
Creo 5.0 Enhancement Summary
Improved visibility
– Meta Data
• Display parts with an undefined CTI value
• Non-homogeneous parts colored blue
– Electric Nets
• Show contents of net
– Results
• Show involved component's only
• Zoom to start of end of failure path
• Identify paths with comments
• Detailed path information
34
CREO SIMULATE PRE-PROCESSOR
Creo 5.0 Enhancement Summary
Ansys interface Update to V18.0
NAFEMS Verification models for:
– Code and calculation Verification
– Plasticity –4
– Finite Friction –7
– Frictionless contact –1
– LDA Contact –1
– LDA –2
– Dynamic Analysis –5
35
CREO SIMULATE SOLVER ENGINE
Creo 5.0 Enhancement Summary
Finite and infinite contact improvements and fixes
– Interface max penetration measure
– Interface quality index measure
– Promote detailed stresses to contact interface dialog
– Promote max penetration to contact interface dialog
– Accuracy level control for contact analysis
36
CREO SIMULATE POST-PROCESSOR AND MESHING
Creo 5.0 Enhancement Summary
Improved graphics
– Integrating ChartDirector graphing app to replace
“old style” graphing
37
CREO MANUFACTURING
Creo 5.0 Enhancement Summary
Improved usability
– Toolpath highlighting
• Select tool path from model tree and choose
option to Display NC Tool Path
– Reference highlighting
• Select toolpath from model tree and choose option to highlight references
Predefined NC parameters
– Set default parameters based on formulas and relations
• Automatically calculate and define parameters for selected tool
• Edit default values at any time
© 2016 PTC
39
CREO ADDITIVE MANUFACTURING EXTENSION (AMX)
Creo 5.0 Enhancement Summary
3DS Print extended printer support
– Micro SLA
• Projet 1200
– MJP
• Projet MJP 2500 Family
• Projet MJP 5500X and 5600
• Projet MJP 3600 Family
• Projet MJP 35X0 Family
GrabCAD Print
– Full support: uPrint(all models), Dimension 768, Dimension 1200es,
Dimension Elite, Fortus200mc, Fortus250mc, F123 Series, StratasysJ750
– Limited support with basic functionality: Fortus360mc, Fortus380mc,
Fortus400mc, Fortus450mc, Fortus900mc.
Materialise
– Build processors (3D printers drivers for metal, slicing, toolpath calculation…)
3MF import/export as pre-requisite to:
– Materialise metal build processors
– Microsoft 3D Printer drivers (Future)
40
CREO ADDITIVE MANUFACTURING EXTENSION (AMX)
Creo 5.0 Enhancement Summary
3D systems direct manufacturing
– Connect to 3DS ODM from Creo
– Get immediate quotes
41
NEW SOLUTIONS
42
CREO PARAMETRIC - UNITE TECHNOLOGY FOR
INVENTOR
Creo 5.0 Enhancement Summary
Unite for AutoDesk Inventor
– Open and update files from AutoDesk Inventor
New Extension
© 2016 PTC
43
Base license of Creo Parametric
CATIA V5
Siemens NX /
Unigraphics NX
SolidWorks
JT
CADDS 5
Creo Elements/Direct
STEP
Rhinoceros
SolidEdge
AutoCAD DXF
For the latest support information, please view the
AutoCAD Drawing compatibility matrix. 44
CREO RENDER STUDIO APP
Creo 5.0 – New Solution
Render Studio Standalone App
– New standalone application for Advanced Rendering
• Same capability as Render Studio Extension, without the modeling environment
• Requires a new license for standalone
– Standalone license will allow users to run Render Studio standalone
or integrated in Creo Parametric
Note: Render Studio Extension cannot be run standalone
– Easily open and configure appearances and render scenes to
create high quality renderings
• Save changes back to the Creo file
– Create Screenshot or output fully rendered image
– Easily export data to standalone Keyshot for extended
Keyshot capabilities
45
CREO FLOW ANALYSIS
Creo 5.0 – New Solution
New offering(s) to support Computational Fluid Dynamics (CFD)
In partnership with:
The Simerics team is comprised of scientists and engineers who have been among the
pioneers in the development and application of multipurpose computational physics since the
early 1980’s
46
CREO FLOW ANALYSIS
Creo 5.0 – New Solution
Computational Fluid Dynamics powered by Simerics
Ease of use
– Familiar Creo command ribbon UI, context sensitive menus,
RMB command access and simplified workflows
– Single UI for easy setup, simulation and post processing
Embedded CAD and CFD
– Analysis updates automatically update when designs are modified
Easy model creation
– Automatic and efficient meshing (works 100% of time)
– One-step creation of separated solid/fluid domains
Rapid simulation turnaround
– Proprietary algorithm speeds run-time and convergence
• Requires 50% fewer iterations to converge
Turbulence ✔ ✔ ✔
Particle ✔ ✔
Radiation ✔ ✔
Species ✔ ✔
Moving/Sliding Meshing ✔ ✔
Cavitation ✔
Multiphase ✔
Multicomponent ✔
Dynamics ✔
Species Simulation - Simulate mixing of LIQUIDS with similar density
Multiphase - Used when simulating Gas and Liquid together
Multicomponent - Another mixing capability used for multiple Gases and density
Dynamics - Simulates FLUIDS and SOLIDS interaction
Cavitation - Simulates Vapor, Free Gas and Liquid (bubbles) compressibility
48
CREO MOLD MACHINING EXTENSION (MMX)
Creo 5.0 – New Solution
Creo Mold Machining Extension provides specialized 3-axis, high-speed machining capabilities
that are optimized to speed mold, die, electrode and prototype machining
In partnership with:
HSM Rough
HSM Rest Rough
HSM Finish
HSM Rest Finish
49
CREO MOLD MACHINING EXTENSION (MMX)
Creo 5.0 – New Solution
Moduleworks-based mold machining
– High speed machining support
• Roughing and Rest roughing
• Finish and Rest finish
• Support for stock model
– Seamless integration with Creo
• Toolpaths are associatively linked to CAD model
3-axis trajectory machining
Comprehensive holemaking sequences
NC process automation (XML templates)
High speed toolpath calculation
– Multi-core and multi-threaded for high speed calculation
– High data process capacity
– Various levels of caching
Simulation
– Collision checking
– Simulate each operation or toolpath
• Visualize workpiece after each operation or toolpath
50
CREO TOPOLOGY OPTIMIZATION (BASIC/PLUS)
Creo 5.0 – New Solution
Creo Topology Optimization supports “generative design” using advanced shape optimization
technology to automatically create designs solving for specified design criteria, goals and
objectives
In partnership with:
51
CREO TOPOLOGY OPTIMIZATION (BASIC/PLUS)
Creo 5.0 – New Solution
Topology Optimization powered by VR&D
Ease of use
– Familiar Creo interaction and workflow
Customers choose the Topology Optimization package that meets their needs Note: When using the base
• Number of Analyses (3 vs. unlimited) The “base” package, Optimization Study
package Setup can include a maximum of 3
• Analysis Type (Structure, Modal, Thermal) analysis-based design objectives
covers 50-70%
• Fabrication Constraints (several vs. many) of the use cases (i.e., reduce stress)
53
CREO ADDITIVE MANUFACTURING PLUS EXTENSION (AMX
PLUS)
Creo 5.0 – New Solution
Creo AMX Plus provides 3D printer connectivity, integrated build process framework
capabilities and automatic generation of 3D metal printing support structures powered by
Materialise the industry leader in 3D plastic and metal printing.
In partnership with:
54
CREO ADDITIVE MANUFACTURING PLUS EXTENSION (AMX
PLUS)
Creo 5.0 – New Solution
3D Metal Printing support powered by Materialise
Printer connectivity
– Seamless connectivity to 70-80% of 3D metal printers
• Printer configurations and connectivity developed and maintained by Materialise
3D print management
– Print manager capabilities powered by Materialise
• Print manager capabilities integrated into Creo
55
CREO GD&T ADVISOR PLUS EXTENSION
Creo 5.0 – New Solution
Background: Creo GD&T Advisor Extension (Creo 4.0 F000 – M030) does not
recognize Creo generated annotations and GD&T
– When Creo GD&T Advisor is started, the user is prompted to delete all Non-GD&T Advisor Annotations
Corrective Action
– Annotation and GD&T information is validated and notification is provided
when GD&T Advisor function features require corrective action to fix:
• Datum feature symbols, Dimensions and Geometric Tolerances
SPN-3391 SPN-3376
57