The document summarizes the design of a beam with an unbraced length of 12 feet made of steel with a yield strength of 36 and ultimate strength of 56. Under a design load combination, the beam experiences a maximum bending moment of 100 kip-ft in the x-direction and 0 kip-ft in the y-direction with no shear forces. Two I-beam sections, I 300x150x76.8 kg/m and I 400x150x72 kg/m, were found to be acceptable with stress ratios between 0.8 and 1.05.
The document summarizes the design of a beam with an unbraced length of 12 feet made of steel with a yield strength of 36 and ultimate strength of 56. Under a design load combination, the beam experiences a maximum bending moment of 100 kip-ft in the x-direction and 0 kip-ft in the y-direction with no shear forces. Two I-beam sections, I 300x150x76.8 kg/m and I 400x150x72 kg/m, were found to be acceptable with stress ratios between 0.8 and 1.05.
The document summarizes the design of a beam with an unbraced length of 12 feet made of steel with a yield strength of 36 and ultimate strength of 56. Under a design load combination, the beam experiences a maximum bending moment of 100 kip-ft in the x-direction and 0 kip-ft in the y-direction with no shear forces. Two I-beam sections, I 300x150x76.8 kg/m and I 400x150x72 kg/m, were found to be acceptable with stress ratios between 0.8 and 1.05.