Professional Documents
Culture Documents
Start-Up
Start-Up
C l i c k t o a d d y o u r t e x t
Mở đầu HYSYS
Start-up
1
Nội dung
1 Chọn Components
2
Tạo môi trường mô phỏng mới
• 3 cách khởi tạo môi trường mô phỏng:
- Chọn File/New/Case
- Ctrl+N
3
Giao diện ban đầu
Các Case đã sử
dụng gần đây
4
Simulation Basis Manager
Các Tab
5
Khởi tạo New Case
6
Thêm các cấu tử
7
Lựa chọn FP
8
Lựa chọn FP
9
Simulation Environment
10
Add Material Stream
11
Add Compositions
12
Add Conditions
13
Thực hành
• Thiết lập dòng vật liệu chỉ có H2O
• Fluid Package: PR
• Flowrate: 100 kgmole/h
• Pressure: 1 atm
• Vapor/Phase Fraction: 1.00
• Temperature ?
14
Thực hành
• Thiết lập dòng vật liệu chỉ có H2O
• Fluid Package: PR
• Flowrate: 100 kgmole/h
• Temperature: 150oC
• Vapor/Phase Fraction: 1.00
• Pressure ?
15
Thực hành
• Thiết lập dòng vật liệu chỉ có H2O
• Fluid Package: PR
• Flowrate: 100 kgmole/h
• Temperature: 70oC
• Vapor/Phase Fraction: 1.00
• Pressure ?
16
Thực hành
• Thiết lập dòng vật liệu chỉ có H2O
• Fluid Package: PR
• Flowrate: 100 kgmole/h
• Pressure: 2 atm
• Vapor/Phase Fraction: 1.00
• Temperature ?
17
Thực hành
• Thiết lập dòng vật liệu chỉ có H2O
• Fluid Package: PR
• Flowrate: 100 kgmole/h
• Pressure: 5 atm
• Vapor/Phase Fraction: 1.00
• Temperature ?
18
Thực hành
• Thiết lập dòng vật liệu chỉ có H2O
• Fluid Package: PR
• Flowrate: 100 kgmole/h
• Pressure: 0.5 atm
• Vapor/Phase Fraction: 1.00
• Temperature ?
19
Thực hành
• Thiết lập dòng vật liệu chỉ có H2O
• Fluid Package: PR
• Flowrate: 100 kgmole/h
• Vapor/Phase Fraction: 1.00
Nhận xét:
• Khi thay đổi T?
• Khi thay đổi P?
20