3M Indianapolis ‘ANso soo?
5457 West 79th Street ‘esietered Company
Indianapolis, IN 46268
800-665-2842
Certificate of Calibration
Certificate Number:2002121 1550EARP04205
Model: EARfit Dual Ear Validation System Speaker Date leeue da emele
SIN: OEARPO4205
3M certifies that the above listed product has been calibrated using standards
which are traceable to the National Institute of Standards and Technology
Test Conditions: Temp: 18-25°C Humidity: 20-80% RH. Barometric Pressure: 950-1050 mBar
Test Procedure: $073-783
Reference Standard(s):
vere fet stad cal corahty Ett 0 Cones Lael)
LabCal 94 Calibrator 20-Feb-2020 4.7% Acoustic (0.4dB)
cattredty: Sexes Apante
In order to maintain best instrument performance overtime we recommend the instrument be receliorated biennially (every 2 yrs).
See user manual for more information,
‘Al equipment used in the test and caftration of this instrument is traceable to NIST, and applies only to the unit identified above,
This report must not be reproduced, except in its entirety, without the writen approval of 3M,
098-725 Rev D Page 1012= vision 3M Indianapolis aueoaaat
3M Personal Safety Di Sie wanton aa Aeghtered Company
Indianapolis, IN 46268
800-665-2942
3M EU Declaration of Conformity
Certificate Number:2002121150EARP04205
Product Line: EARfit Model: EARfit Dual Ear Validation System Speaker ‘SIN:OEARPO4205
Directives Covered:
> EMC/ Council Directive 2014/30/EU on Electromagnetic Compatibility
> Safety / Council Directive 2014/35/EU on Low Voltage Equipment Safety
> RoHS / Council Directive 2011/65/EU on the restriction and use of certain hazardous substances
> — WEEE / Council Directive 2012/19/EU Waste Electrical and Electronic Equipment
The basis on which conformity is being declared:
EN 61326-1 (2005) Electrical equipment for measurement, control and laboratory use - EMC requirements
Group 1, Class B Equipment (emissions)
EN 61326-1 (2005) Electrical equipment fo measurement control and laboratory use - EMC requirements
Industrial location immunity
IEC 61010-1 (2010) Safety requirements for electrical equioment for measurement, control and laboratory use
Part 1: General Requirements
CFR‘47 (2008) Code of Federal Reguletions: Part 15 Subpart B - Radio Frequency Devices - Unintentional Radiators
EN 50581 (2012) Technical documentation for the assessment of electrical and electronic products with respect
to the restriction of hazardous substances
Note: This certification apples to all standard options and accessories supplied with the instrument,
[At the end ofits life cycle, this product must be sent to a WEEE recycling center, and is marked accordingly.
“The technical construction file required by this directive is maintained in Oconomowc, WI USA
AB oe
Mike Wurm - Technical Manager / Detection Solutions, 3M Company
Page 2 0f2ivi aM indianapolis ‘809001
Sakasi 5457 West 79th Stroot Registered Company
Indianapolis, IN 46268,
800-665-2942
Certificate of Calibration
Certificate Number:20021211546897
Model: EARFit Dual Ear Validation System Microphone Date Iesued:12-Feb-2020
SIN: 6897
‘3M certifies that the above listed product has been calibrated using standards
which are traceable to the National Institute of Standards and Technology
‘Test Conditions: Temp: 18-25°C Humidity: 20-80% R.H. Barometric Pressure: 950-1050 mBar
Test Procedure: $073-783
Reference Standard(s):
bev Refs ctbue Ura Estat 6 Cones Lev 2
LabCal 94 Calibrator 20-Feb-2020 4.7% Acoustic (0.48)
caracser: — Fenesa Upante
In order to msintain best instrument
formance over time we recommend the instrument be recelibrated biennially (avery 2 yr)
‘See user manual for more information,
All equipment used in the test and calibration ofthis instrument is traceable to NIST, and apples only to the unit identified above,
This report must not be reproduced, except ints entirely, without the written approval of SM
098-724 RevD Page 1 of 2a 3M indianapolis sareosaat
3M Personal Safety Division ee ceesnoes Ea fogtered Company
Indianapolis, IN 46268.
300-665-2942
aM EU Declaration of Conformity
Certificate Number:2002121 1546897
Product Line: EARft Model: EARfit Dual Ear Validation System Microphone SIN:6897
Directives Covered:
> EMC/ Council Directive 2014/30/EU on Electromagnetic Compatibility
> Safety / Council Directive 2014/35/EU on Low Voltage Equipment Safety
RoHS / Council Directive 201 1/65/EU on the restriction and use of certain hazardous substances
> WEEE / Council Directive 2012/19/EU Waste Electrical and Electronic Equipment
The basis on which conformity is being declared:
EN 61326-1 (2005) Electrical equipment for measurement, control and laboratory use - EMC requirements
Group 1, Class B Equipment (emissions)
EN 6126-1 (2005) Electrical equipment fo measurement control and laboratory use - EMC requirements
Industrial location immunity
IEC 61010-1 (2010) Safety requirements for electrical equipment for measurement, control and laboratory use
Part 1: General Requirements
CFR:47 (2008) Code of Federal Regulations: Part 15 Subpart B - Radio Frequency Devices - Unintentional Radiators,
EN 50581 (2012) Technical documentation for the assessment of electrical and electronic products with respect,
to the restriction of hazardous substances
Note: This certfication applies to all standard options and accessories supplied with the instrument.
‘tthe end of ts lfe cycle, this product must be sent to a WEEE recycling center, and is marked accordingly.
The technical construction file required by this directive is maintained in Oconomowoc. WI USA
cbs
Mike Wurm - Technical Manager / Detection Solutions, 3M Company
Page 2 of2