Professional Documents
Culture Documents
Final
Final
PROJECT REPORT ON
SUBMITTED TO
R.L.C. CIRCUIT
DEPARTMENT OF VOCATIONAL EDUCATION &
TRAINING , MAHARASHTRA
IN THE PARTIAL FULFILMENT FOR THE
MR.DILIP MAGDUM
MR. SHARAD SHINGE
MR. SHIVRAJ GAVADE
MR. SANKET MAGDUM
MR.YUVRAJ PARIT
MR.VAIBHAV POWAR
MR.REHAN MUJAWAR
CERTIFICATE
This is to certify that the project report entitled,
R.L.C. CIRCUIT
Submitted By,
1|Page
DRJJMITI JAYSINGPUR.
An analog power meter is a device that features a
printed display to indicate any electrical parameter.
An example could be the energy consumed by a typical
business, or electrical device. Also called an
electromechanical meter, these offer a simple to read
display.
4|Page
DRJJMITI JAYSINGPUR.
Single pole MCBs are used where the neutral of all
individualloads are connected together and the single pole
MCB is connected with the phase wire. Although single-
phase MCBs have limited applications, but they used some
small and important applications.
5|Page
DRJJMITI JAYSINGPUR.
An ammeter (abbreviation of Ampere meter) is an
instrumentused to measure the current in a circuit. Electric
currents aremeasured in amperes (A), named from the
French physicist André-Marie Ampère. For direct
measurement, the ammeter is connected in series with the
circuit in which the current is to be measured.
7|Page
DRJJMITI JAYSINGPUR.
A switchboard is a component of an electrical distribution
system which divides an electrical power feed into branch
circuits while providing a protective circuit breaker or fuse for
each circuit in a common enclosure.
8|Page
DRJJMITI JAYSINGPUR.
Pipe earthing uses 38mm diametre and 2 metres length
pipe vertically embedded in the ground to work as earth
electrodes. In plate earthing, an earthing plate made of
copper or G.I. is buried into the ground at a depth more than
3 metres from the ground level.
Plate earthing: It is used for larger stations and
transmission lines, where the fault current, likely to be
high. Pipe earthing: It is used for ordinary soil or dry and rocky
soil. The size of the pipe depends upon the current to be
carried and the type of the soil.
The pipe earthing is better than another type of earthing,
because it can earth more leakage current, and the
possibility of braking in the earth wire is minimum. Pipe
Earthing: In this method the galvanized steel and perforated
pipe of approved length and diameter in place upright in a
permanently wet soil.
9|Page
DRJJMITI JAYSINGPUR.