Professional Documents
Culture Documents
Info T 69 EN MC3
Info T 69 EN MC3
Info T 69 EN MC3
Technical Information No 69
Change to type of ball-bearing for MC3 family of micromotors.
Purpose
All MC3s manufactured since October 2010, i.e. from SN 10J, offer enhanced protection against
impurities and improved hold for ball-bearings. This results in an extended service life.
Running-in We now recommend a longer running-in period before the motor is delivered to
the customer. This longer running-in time is necessary to allow an even distribution
of grease inside the closed bearings. At the same time, the brushes are also better
run-in!
Temperature You will notice during the running-in period that the temperature of the MC3
motor may be slightly higher than with other bearings. As a result, the current of
0.4 Amps indicated on IC 751-015/09 may be momentarily exceeded.
MC3 LED The MC3 LED motor is equipped with the new rotor version.
1/2
De / From Bien-Air Dental SA, Switzerland
Service après vente / After sales service
À / to Réparateurs Bien-Air / Bien-Air repair agents
Date 21.12.2010
2/2