Professional Documents
Culture Documents
Mak Thermic Fluid Synth
Mak Thermic Fluid Synth
MAK THERMIC FLUID SYNTH is developed for indirect Typical Physico-Chemical Data: MAK THERMIC FLUID
heating in a closed system with forced circulation. It is SYNTH
Characteristics Method Value
recommended for heat transfer systems for industrial
Appearance Visual Clear & Bright
applications like chemical plants, process heating, textile
Colour Visual Light Yellow
plants etc. It is also suitable for applications where repeated
Density, g/cc @15OC ASTM D1298 0.862
heating and cooling cycles are involved. MAK THERMIC Copper Corrosion, 100OC, 3 hrs. ASTM D130 1a
FLUID SYNTH can be used in continuous heat transfer Flash Point, COC, OC ASTM D92 210
system with the following temperature limit: Fire Point, COC, OC ASTM D92 268
Extended maximum use temperature: 315OC Kinematic Viscosity @40OC, cSt ASTM D445 21.0
Kinematic Viscosity @100OC, cSt ASTM D94 4.1
Performance/ Benefits: Viscosity Index ASTM D2270 90
Excellent Oxidation Resistance – Outstanding resistance to Initial Boiling Point, OC ASTM D1160 370
sludge and deposit formation even when the oil undergoes Final Boiling Point, OC ASTM D1160 420
repeated heating and cooling cycles. Dual-stage-antioxidant Neutralisation Value, mg KOH/ g ASTM D664 <0.1
system keeps heat exchanger surface clean. Longer Co-efficient of Thermal -- 0.000798
operating life and lower operating cost. Expansion, per OC
Thermal Conductivity @29.5OC, -- 0.000322
Excellent Thermal Stability – provides resistance to break Cal/cm. S OC
down and deposit formation inside the piping for optimum
life and performance. Storage & Handling:
The product should be stored inside. Keep it properly sealed
Low Viscosity – low viscosity assures excellent fluidity and to avoid contamination. Avoid freezing. Shelf life is 5 yrs.
heat transfer over a wide temperature range. under protected storage conditions.
Low Volatility and Low Vapour Pressure – low volatility Health & Safety:
coupled with low vapour pressure and high flash point They are unlikely to be hazardous when properly used in
indicates low evaporative loss. Reduces top up quantity. recommended applications. Contamination of the oil from
Low vapour pressure resists cracking and minimises the other oils, greases, chemicals, dirty water etc. can occur
formation of volatile decomposition products. during the use. It should be avoided. Regular monitoring of
the in-use product is recommended.
Excellent Thermal Conductivity – high heat transfer
coefficient ensures rapid heating. Potential for saving of fuel
consumption.
Additional Data:
20
Kinematic Viscosity, cSt
15
10
Temperature, DegC
0.85
0.8
Density Kg/m3
0.75
0.7
0.65
0.6
Temprature in Deg C
0.7
Specific Heat, Cal/gr Deg C
0.65
0.6
0.55
0.5
0.45
0.4
Temperature DegC
0.00032
0.00031
0.0003
0.00029
0.00028
0.00027
0.00026
0.00025
0.00024
Temperature, Deg C