Professional Documents
Culture Documents
CV - Ravindra Jivani - SAUDI ARAMCO APPROVED INSPECTOR & QA QC Welding Inspector (CSWIP 3.1 Level 2) - Inspection Engineer - pdf-7
CV - Ravindra Jivani - SAUDI ARAMCO APPROVED INSPECTOR & QA QC Welding Inspector (CSWIP 3.1 Level 2) - Inspection Engineer - pdf-7
Gujarat (India)
Contact: +91 9737554758;
Email: ravindrajivani.bvil@gmail.com
Date of Birth: 24th January, 1984
Seeking an opportunity for professional challenge and growth to support and enhance co-operative
objectives of the company
PROFILE
• Qualified Bachelor of Mechanical Engineering from Sardar Patel University, India and a certified Welding
Inspector with experience of 11+ years across QA/QC Welding, NDT, Coating & Third Party Inspection.
• Currently spearheading as a QC Mechanical Inspector with Applus Velosi Saudi Arabia Co. Ltd. Well versed in
conceptualizing and implementing operational strategies for the quality functions by carrying out quality
planning to confirm the organizational QA/QC requirements.
• Proficient with QC Welding Inspection and various NDT methods such as Liquid Penetrant Testing, Magnetic
Particle Testing, Ultrasonic Testing & Interpretation and Radiography Testing. Skilled in utilizing appropriate
NDT methods for executing the projects and conducting tests to ensure quality or detect defects using NDT
methods of inspection.
▪ Focused and hardworking professional equipped with thorough knowledge and technical understanding
coupled with an analytic bent of mind and confident to take challenging assignments.
Core Competencies
QC Welding Inspection and Non Destructive Testing Integrity and Risk Based Inspection Safety Operations
Quality Management Cross Functional Coordination
Employment History
❖ Currently Working as a QA/QC Mechanical Inspector with Applus Velosi, Saudi Arabia from 04 September,
2019 to Till Date.
❖ I have worked with BUREAU VERITAS INDIA (P) LTD as Surveyor-QA/QC Inspection Engineer From 14 May,
2012 to 19 August 2019.
❖ I have worked with Surya Global Steel Tubes Ltd. as a QA/QC Engineer from 22 February 2010 to 05 May
2012.
❖ I have worked with PSL LTD. as a QA/QC Engineer from 15 November 2007 to 09 February 2010.
PROFESSIONAL EXPERIENCE
APPLUS VELOSI SAUDI ARABIA CO. LTD. (QC MECHANICAL INSPECTOR) SEPTEMBER 2019 – TO TILL CONTINUE
BUREAU VERITAS INDIA LIMITED [SURVEYOR (INSPECTION ENGINEER)] MAY 2012 – AUGUST 2019
SURYA GLOBAL STEEL TUBES LTD (QA/QC ENGINEER) FEBRUARY 2010 – MAY 2012
CLIENT APPROVAL
• SAUDI ARAMCO APPROVED QC INSPECTOR [ QM 03 04 05 12 14 15 25] - VENDOR INSPECTION DIVISION
(SAP Number: 70021941/New SAP Number: 80006656)
WITH SAUDI ARAMCO NEW CBT EXAM QUALIFIED in February 2020
• OGC APPROVED LINE PIPE INSPECTOR (OMAN GAS COMPANY, OMAN)
➢ Re-routing of Existing 8 inch SQU-MAM Gas Pipeline Inside MOD Area - DD - Seamless Pipes as per DEP
Specification, API 5L – Annex H, K
➢ AD DUQM 36” Gas Pipeline – Jindal SAW Ltd., Nanakapaya, Mundra, Gujarat, India – LSAW Pipes as per
DEP Specification, API 5L – Annex H, K, J
• KOC APPROVED LINE PIPE INSPECTOR (KUWAIT OIL COMPANY, KUWAIT)
• GAIL APPROVED LINE PIPE & COATING INSPECTOR (GAS AUTHORITY OF INDIA LIMITED, INDIA)
• ONGC APPROVED LINE PIPE & COATING INSPECTOR (OIL & NATURAL GAS COMPANY, INDIA)
➢ Worked for ONGC Project at Volzhsky Pipe Plant (TMK Group) Volzhsky at Russia
➢ Pipeline Replacement Project – 4 – SWIBER OFFSHORE CONSTRUCTION PTE LTD
➢ Daman Development Project - SWIBER OFFSHORE CONSTRUCTION PTE LTD
➢ MHSRD – III - SAPURA KENCANA PETROLEUM
• IOCL APPROVED LINE PIPE & COATING INSPECTOR (INDIAN OIL CORPORATION LIMITED, INDIA)
• SAIPEM APPROVED LINE PIPE & COATING INSPECTOR
• L & T APPROVED LINE PIPE ,WELD OVERLAY & COATING INSPECTOR
➢ Worked for Saudi Aramco Project at Cladtek Holding Pvt Ltd. Batam at Indonesia
➢ Project – HASBAH, SAFANIYA, CRPO
• Odebrecht E & P GmbH Approved LINE PIPE & COATING Inspector
• Reviewing inspection Test Plan, Raw Material Test Certificate, Welding Procedure Specification and Non Destructive Test
Procedures.
• Seamless Pipes Inspection for Sour Service and Offshore Service as per ONGC Spec No.2020B (SPECIFICATION FOR CARBON
STEEL SEAMLESS LINE PIPE FOR SUBMARINE PIPELINES (SOUR SERVICE).
• Seamless Hot Induction Pipe Bends as per ONGC Functional Specification for Long Radius Bend ONGC SPEC. No.2018 and
ONGC FS 2004A, ONGC FS2004D.
• Instrumental in the inspection of Raw Materials such as Plates, Pipes, Fittings and Flanges.
• Monitoring consumable storage, handling, packing and drying temperature as per project approved procedure.
• Ensuring the verification of weld joint preparation, fit up, alignment & dimensional inspection as per drawings.
• Efficiently monitoring the welding parameters i.e. current, voltage, travel speed etc. during the welding as per approved WPS.
• Checking Pre heat, Inter pass temperature and inter pass cleaning as per WPS.
• Responsible for visual inspection of each pass/layer of welded joint profile for surface finish and defects.
• Reviewing NDT procedure, PWHT procedure, hydro test procedure, etc also reviewing and witnessing welding procedure and
performance qualification record.
• Accountable for the verification of weld repair work, qualify welding procedure and welder as per the applicable standard.
• Verifying proper preheating and monitor welding parameters during welding also monitoring PWHT and reviewing charts.
• Assisting in material Identification with the help of P.M.I. analyzer machine according to raw material specification.
• Involved in the inspection of LSAW /HSAW & ERW Line Pipes as per API 5L for sour service & non sour service also involved
in the inspection of 3LPE coating & Internal Epoxy coating as per DIN 30670 standards.
• Inspection of Casing and tubing pipes as per API 5CT.
• Inspection of Pressure Vessel & Storage Tank as per EN 13458 standards.
• Carrying out dimensional and visual inspection as per QAP/Codes/Standard on all the finished products like pipe, tubes,
bends, pressure vessel, Tanks, TMT Bar and fittings, etc.
• Inspecting incoming Material with respect to the actual traceability against manufactures Certificate.
• Ensuring the verification of Manufacturing Test Certificates of Raw materials like HR Coil, Filler wire and Welding Electrodes.
• Monitoring manufacturing stages as per approved ITP/QAP & Clients requirements also witnessing Welder/Welding
Procedures Qualification.
• Handling the calibration of pressure gauges by dead weight tester.
• Witnessing and Verifying fit up arrangement before welding also looking after the inspection of Cryogenic Vessels as per
client specification.
• Witnessing Hydro Test, all NDT Tests (UT, RT, MPI & PT) and all Mechanical tests – Tensile test, Hardness test, Charpy V
Impact, Drop Weight Tear Test, Bend test, Chemical, HIC, SSCC and Nick Break Test.
Inspection of 3LPE, 3LPP, FBE & DFBE coating & Internal Epoxy coating as per DIN standard & ISO Standard.
• Efficiently reviewing Raw material test certificate as per QAP or client specification also witnessing Raw material test at
laboratory.
• Witnessing raw material testing & procedure qualification testing at laboratory as per client specification such Bend test,
Impact test, Tensile strength test, Cathodic Disbondment test, Indentation test, Hardness test, Cure test (DSC Meter), etc.
• Monitoring Environmental condition before & during blasting and painting/coating application also assessing surface
cleanliness & profile of blast cleaned surface.
• Monitoring coating material storage conditions, thinning, mixing, induction time and pot life of paint to be applied.
• Witnessing test like as adhesion test, peel test, hardness test, holiday test for integrity of coating.
• Witnessing surface contamination test like for chloride, sulphate soluble salt on blast cleaned surface, etc. Monitoring
coating material storage conditions, coating application parameters during application, witnessing wet /dry film thickness
and Visual Inspection of Coating.
Code OR standards
• API 5L, API 1104, ASME SEC –II PART C,V, IX, DIN, ISO, IS & ASTM, (ONGC Functional SPECIFICATION FOR CARBON STEEL
SEAMLESS LINE PIPE FOR SUBMARINE PIPELINES (SOUR SERVICE - Spec No.2020B), ONGC Functional Specification for
Long Radius Bend ONGC SPEC. No.2018 and ONGC FS 2004A, ONGC FS2004D.
EDUCATIONAL CREDENTIALS
Bachelor of Mechanical Engineering, 2007
A.D. Patel Institute of Technology, Sardar Patel University
Certificates
• SAUDI ARAMCO QUALIFIED INSPECTOR IN QM 03, QM04, QM05, QM12, QM14, QM15, QM25 (SAP NO. 70021941/ NEW
SAP NO. 80006656 – WITH SAUDI ARAMCO NEW CBT EXAM QUALIFIED in February 2020)
• CSWIP 3.1 Level 2 Welding Inspector from TWI, UK
• Certificate No – 78501 Expiry Date – 08/08/2023
• Non Destructive Testing LEVEL – II IN UT, RT, MPT & LPT (ASNT)
• Passport Number : R0105311 valid till 23rd May 2027
End User:
Sakar Society, Survey No.205, Plot No. 18,19, Behind Swami Lilasha Kutiya, Meghpar Borichi, Anjar – 370 110, Kutch,
Gujarat, India.
Declaration:
I hereby declare that the particulars in the application are correct to the best of my knowledge and belief.