Professional Documents
Culture Documents
How To Make An IR Blaster
How To Make An IR Blaster
by Jugaad it yourself
https://youtu.be/3-yvT13t8zU
1x 3.5mm Aux cable ( I had broken one lying down so I used that, You can alos get a standalone 3.5MM which
can be easier
2x IR leds
I'm sure if you have dealt with leds then you will know hot find out anode & cathode. Nevertheless
I will tell you how to find out alway the long lead is the Anode(+) & the short lead is the cathode(-).
Connect the two led in series where in positive(+ Anode) of led 1 should be connected to the negative(- cathode)
of led 2 & positive(+ Anode) of led 2 should be connected to negative(- cathode) of led 1.
Please check the Image on how to connect the Led to the 3.5 mm Jack
After you have soldered it it should look something like the image shown.
You can use some heat shrink to to give good finishing I did't feel like giving a finishing as this was just a test
Video
In order for this to work you the ZAZA remote App My suggestion would be to try and make one and
(https://play.google.com/store/apps/details? check if it works and then if you want you can buy
id=com....)
from the link
go to advance settings
https://www.banggood.com/5Pcs-Portable-3_5mm-
Increase the Macro key sending gap to 1000 MS & Andro...
turn on the audio reversal
https://www.amazon.in/gp/product/B01MS3ZTU7/ref=
TEST RESULTS as...
test results prove that it works However there are You can check My Youtube Video for the making.
limitations. Like range & audio Drivers of the phone.
https://youtu.be/3-yvT13t8zU
This is DIY IR blaster is not compatible with all the
Handset if you have good sound driver in your phone Thank you......
it will work. For some reason it didn't work on my
other sony phone.