Professional Documents
Culture Documents
Product Details
Product Details
Product Details
More economical than hand washing, the FlaskScrubber® is designed to clean flasks,
beakers, and other types of specialized glassware
Tank and wash arms are constructed of Type 304 stainless steel. Fiberglass blanket and
aluminum-backed acoustic material provide double insulation for heat retention and low
noise levels. The absence of a central water distribution tower allows for a greater
glassware capacity. Separate pumps for washing and draining reduce the potential for
cross contamination. An integral forced air system draws air through the spindles for up
to 250 minutes. This drying cycle is programmable from 38 to 70°C (100 to 158°F).
Microprocessor control with LCD has factory preset programs that may be altered for
specific requirements by changing wash and dry times or number of rinses. All 115V
models have seven programs: rinse only, plastic, glass, glass plus, scientific, scientific
plus, and dry only. All 230V models have three additional programs: intense, intense
plus, and extreme. Two additional programs may be created and stored for repeated
use. Cycles include multiple tap or purified water rinses and heated or non-heated
drying. Enhanced washing and drying results can be obtained with 93°C (199°F) water
temperature on 230V models.
Washers include a motor that recirculates up to 424L (112gal.) of water per minute
throughout the tank, purified water pump, steam generator, and detergent and
neutralizing rinse solution dispensers. Each washer comes with a lower spindle rack
containing 36 detachable large spindles for washing narrow-neck glassware, 18
glassware holders, 36 clips, 10 small spindles, and a 1.9cm (3/4") hose barb for
connection to a purified water source. Washers can also be accessorized with inserts to
hold pipets, an upper spindle rack, or racks and inserts that hold other specialized
glassware. The front door on all washers is brushed stainless steel. Freestanding models
also have brushed stainless steel sides and top. Washers with a viewing window in the
door have a 25W interior light that illuminates the tank while the latch is locked.
Freestanding models can be converted to mobile units with a mobile conversion kit.
The unit features a powerful steam cycle that penetrates hard-to-reach places and
removes dried and baked-on contaminants. Throughout the cleaning cycles, the unit is
continuously heating, thus boosting water and glassware temperatures and improving
drying results.
back panels; 9.5mm (3/8") IPS valve inlet for tap water; and leveling feet. All freestanding
models require hard wiring to a dedicated 20A circuit and require a 3.8cm (1 1/2") vent
trap or drain air gap. Mobile conversion kits include casters, plumbing, and electrical
components. The 115V conversion kit includes a 3m (10') power cord and NEMA 5/20
plug. The 230V conversion kit includes a 2.4m (8') power cord and NEMA 6/20 plug. For
additional unit accessories, see 97001-186 series. For LabSolutions™ detergents, see
additional unit accessories, see 97001-186 series. For LabSolutions™ detergents, see
60787-680 series.
ORDER
VWR
Shipping Supplier
Catalog Unit Price Quantity Description Electrical W×D×H Supplier no.
weight No.
Number
61.2×69.6×86.6
to 91.7 cm (241/8
Undercounter 115 V, 60 83 kg
97001-156 Each $13,675.46 4420320 4420320
FlaskScrubber® Hz ×273/8×341/8 to (182 lbs.)
361/8")
SPECIFICATIONS
ACCESSORIES
Accessories
VWR
Catalog Unit Price Quantity Description For use with Supplier no. Supplier No.
Number
Glassware Holder,
10.2 cm (4") High,
15202-536 Each $88.36 FlaskScrubber 4424600 4424600
Gray Vinyl-Coated
Stainless Steel
Glassware Holder,
10.2 cm (4") High,
Plastic, included with
97006-622 Each $21.90 FlaskScrubber 4585204 4585204
every FlaskScrubber®
and FlaskScrubber®
Vantage
Glassware Holder,
15.2 cm (6") High,
15202-537 Each $109.79 FlaskScrubber 4424800P 4424800P
Gray Vinyl-Coated
Stainless Steel
FlaskScrubber,
Test Tube Holder, 150
SteamScrubber,
89208-224 Each $330.28 each 10-13 mm OD 4546100 4546100
FlaskScrubber
tubes
Vantage Series
Test Tube Holder, 75
each 14-20 mm OD
tubes, May be FlaskScrubber,
stacked with either SteamScrubber,
89208-226 Each $330.28 4546200 4546200
holders 4546200 or FlaskScrubber
4546300 (sold Vantage Series
separately) when
tubes are 125 mm or
shorter
FlaskScrubber,
97002-964 Each $185.87 Tray Insert, 5 Trays 4598401 4598401
SteamScrubber
FlaskScrubber,
66074-407 Each $279.95 Utensil Basket 4402201 4402201
SteamScrubber
FlaskScrubber,
82017-984 Each $420.69 Utensil Holder 4542500 4542500
SteamScrubber