The document outlines a preventive maintenance program for casting machines of various sizes, including routine maintenance schedules and an overhauling schedule. It also provides a preventive maintenance format for extruders that details 15 scope of work items to check and potentially replace components. The format includes testing the machine after maintenance and noting the yearly service schedule.
The document outlines a preventive maintenance program for casting machines of various sizes, including routine maintenance schedules and an overhauling schedule. It also provides a preventive maintenance format for extruders that details 15 scope of work items to check and potentially replace components. The format includes testing the machine after maintenance and noting the yearly service schedule.
The document outlines a preventive maintenance program for casting machines of various sizes, including routine maintenance schedules and an overhauling schedule. It also provides a preventive maintenance format for extruders that details 15 scope of work items to check and potentially replace components. The format includes testing the machine after maintenance and noting the yearly service schedule.
150 200 265 300 320 25-May-23 400 500 PREVENTIVE MAINTENANCE FORMAT- EXTRUDERS EQUIPMENT REF: DATE: LOCATION: DONE BY: (Technician) Maintenance program for Extruder ( size ) Sl. SCOPE OF WORK 1 Dismantle the drive shaft/ Cylinders and recondition if required. 2 Change all the seals, bearing, bushes on the drive shafts/cylinders 3 Chack and rearrange/replace the screws according to wear 4 Replace tube and mass guide with new ones 5 Check the side plates and levelling plates for were and bush play 6 Check the compaction system, shaft, key, excentric bush, bearing 7 Replace comp. shaft, key, excentric bushes, bearing if required 8 Check the chains and sprokets- replace chain for screws 9 Check the wheel bearings for play and wear 10 Check the drive belts 11 Check the strand guide clearance and hydraulic lift system 12 Check and reset position of tubes, sideplates and levelling beam ass. 13 Check and clean electrical panelboard and connections 14 Check and clean electrical sockets and cable connections. 15 Check the functions of emergency switches 16 Lubricate 17 Test run on the stand