Professional Documents
Culture Documents
A2 Envirobase Plastics Chart Poster
A2 Envirobase Plastics Chart Poster
BODYKLEEN D820 or
Bumper SU408 D846 SUA4903
Most Commonly Plastic
Used Substrates: Adhesion
Promoter
PP
TPO
PP/EPDM
EnviroLOCK
Wheel Trim
Most Commonly
Used Substrates:
LEXAN does NOT require
LEXAN an adhesion promoter
PA
LVC-104, LVC-105,
Envirobase LVC-136, DC527 in
LV Mode
Wing Mirror
Most Commonly
Used Substrates:
ABS
NORYL Clean & scuff. Anti-Static Agent
PC/PBT Wash off Wipe on and
thoroughly wipe off.
with clean
water & dry.
(4 parts Bodykleen :
1 part Water)
Spoiler
Most Commonly
Used Substrates:
PC
PBS
PUR Optional Phase
A flexiblised Highbuild
primer (LVP2019) can
be used over Plastic
Adhesion promoter
Glass Reinforced where sanding is
required to a flat finish.
Substrates i.e. Eliminate texture
Most Commonly
Used Substrates:
GRP
SMC
DO NOT PAINT
PE
HDPE
MODPE
Repair
BODYKLEEN D820 or
All Car Parts EXCEPT 1K PUR SU408 D846 SUA4903
Most Commonly Used Substrates: Anti-static Plastic
Agent Adhesion
PP NORYL LEXAN Wipe on & Promoter
TPO PC/PBT PA wipe off. LVC-104, LVC-105,
PP/EPDM PUR
Optional Phase Envirobase LVC-136, DC527 in
ABS SMC Apply a Highbuild LV Mode
Primer and flexibilise
For light filler for build (LVP219)
repairs use A652 Sand with P320
Sand with P400-500
Sensitive Plastics Clean & scuff.
Wash off
D816 Wipe with Pre-Clean
thoroughly
Most Commonly with clean Plastic
Used Substrates: water & dry. Adhesion
1K PUR Promoter
(4 parts BodyKleen :
1 part Water)