Professional Documents
Culture Documents
Stabio S 100
Stabio S 100
32 46 68 100
density/15°C kg/m³ DIN 51757 830 833 840 840
flash point COC °C ISO 2592 >230 >230 >250 >250
viscosity class ISO VG 32 46 68 100
Viscosity/40°C mm²/s DIN 51562/T1 32 46 69 100
Viscosity/100°C mm²/s DIN 51562/T1 6,1 7.6 10,4 14.2
Pourpoint °C DIN ISO 3016 <-54 <-54 <-48 <-48
The information given in the typical data does not constitue aspecification but is an indication based on current production and can be
affected by allowable production toleranöces. The right to make modifications is reserverd by OOO “LLK-International”.
3. Fill the new oil to the minimum oil level mark, start up the compressor and let it run until the oil
has circulated several times.
For safety reasons we recommend that you take an oil sample (100ml) after approx. one hour’s
running time and send it to our laboratory for analysis. This will allow us to establish whether the
changeover has been successful.
We recommend that oil samples are taken regularly to determine the oil change interval and
guarantee the safe operation of the compressor. Our laboratory offers rapid and competitively
priced tests as well as expert technical evaluation and advice.