Professional Documents
Culture Documents
Iso 6
Iso 6
PDMS
(https://www.thepiping.com/) Uncategories
produced from the 3D software’s like PDMS, PDS, SP3D, Autopipe etc and some times these piping isometrics are
develop from manually in auto cad with the help of piping general arrangements drawings. Piping isometric shall
include pipes, pipe fitting, valves, instruments, piping specialties, flanges and other accessories as indicted in P & I
diagram. Support location & type shall be marked as suggested by stress department. A statement-indicating bill of
materials shall also be drawn on the same drawing.
Generally one isometric drawing is produced for one line. Piping isometric contain the bill of material list, which shows
the no of mtrs pipe, quantity of flange, elbow, valve, gasket, nuts and bolt, erection materials and fabrications materials.
(https://2.bp.blogspot.com/-XwgEgqRqbz0/V1wFKKGnl_I/AAAAAAAAARY/LHJXDM8gwNQilx0ycQSFElewQbV7-
N7bwCLcB/s1600/isometric.jpg)
Fabrication materials is that materials which are going weld or assemble ( thread fitting ) in the yard fabrication shop.
Erection materials is that materials which are going to used in the site for assembly of pipe spools like gaskets, bolts etc.
1 of 2
This piping isometrics is used for withdrawal of materials required for fabrication from stores and pre fabrication of
piping spools in the fabrication shop.
https://www.youtube.com/watch?v=0UmfF_HMRBA
Share this
Google (https://plus.google.com/share?url=https://www.thepiping.com/2016/06/piping-isometrics.html)
Facebook (https://www.facebook.com/sharer/sharer.php?u=https://www.thepiping.com/2016/06/piping-
isometrics.html)
Twitter (https://twitter.com/intent/tweet?
text=Piping%20isometrics%3A%20What%20is%20Piping%20Isometrics.%20-
%20Piping%20Design&url=https://www.thepiping.com/2016/06/piping-isometrics.html)
More
1 of 2
1 of 2
FB
1 of 2