Professional Documents
Culture Documents
Smart MCCs
Smart MCCs
Innovate with
LS Smart Motor Control Solution!
LS smart MCC enhanced the function of motor operation,
protection and measurement by applying smart EMPR.
It is smarter control and management system that gives you the convenience
from energy management to maintenance.
PC manager
Local HMI
Smart EMPR
02
Smart MCC
CONTENTS
MCC panel
Customer convenience
•Minimize field check by remote monitoring through PC manager
•Setting and monitoring multiple EMPRs through local HMI and PC manager
03
Smart MCC
System configuration
Our system improves convenience and safety of your system operation and
management by enhancing local & remote monitoring function through local HMI and PC manager.
PC manager
Maximum 10 HMIs can be
connected to 1 PC manager.
SCADA
Maximum 30 S-EMPRs
can be connected to 1 HMI.
RS-485
(modbus)
04
Smart MCC
S-EMPR MMP
A variety of SCADA functions based on sequence structure.
One S-EMPR model is applicable to various motor starting types,
such as full voltage starting, Y-△ starting, reversible starting,
reactor starting, and inverter starting.
Convenience
Wide setting range and dual protection
Providing ground fault protection by dual detections -zero-phase current and residual
current levels.
05
Smart MCC
S-EMPR MMP
Reliability
Comprehensive dgital motor protection relay with the MCU (Microprocessor Control Unit)
Providing real-time processing and high precision
Frequent-starting protection
The number of automatic resets for the set time (20 minutes) is settable to provide
frequent-starting protection.
Password setting
When changing the set values, a password must be inserted.
06
Smart MCC
07
Smart MCC
Features
10.2 inch wide display Convenience of MMP setting Enhanced field monitoring function
• Display size : 25.9cm (10.2”) • Check and change all • Monitoring max. 30 MMPs at a time
• Resolution : 800 x 480 (WVGA) the set value of MMP • Operation condition and load rate
• CPU : ARM9 core, 454MHz • Possible to change the • Fault / Alarm check
• Communication interfaces set value of multi MMP • Motor on / off control
: RS 485 ↔ Ethernet
Local HMI Main Screen General settings screen MMP communication connection screen
① ② • Automatically scan the modbus address (No.
1 ~ 30) and communicate with the MMP of the
corresponding address automatically.
③ ④ • Automatically recognize the type (current type
/ power type / ground type) of the MMP during
communication connection.
① General settings
MMP settings screen
HMI device setting / HMI communi-
cation setting / MMP communica- • Display the setting value according to each
MMP type
tion setting / MMP communication
• Possible to change each setting item through
connection pop-up window
② MMP settings • Possible to collectively change the set value of
a specific MMP to an MMP of the same type
Measurement value checking and
changing functions
③ Monitoring / Control
Monitoring / Control screen 10 MMP monitoring screens
08
Smart MCC
09
Smart MCC
(259.5)
(107.6) (107.6)
276+0.3
(201.5)
(208.1)
218+0.3
44.4+0.3
(107.3) (127.3)
10
Smart MCC
PC manager S/W
All functions of HMI such as setting, monitoring, and control are
operated remotely. Trend check function enables smart operation
anytime, anywhere.
Features
All HMI functions can be used remotely Trend check function (data export possible)
(setting / monitoring / control, etc.) • Check the measured value trend: current, voltage*,
• Check and change the MMP setting load rate, distortion rate, etc.
• MMP monitoring and control • Energy management function support: Power by motor
• Check fault log • Maintenance function support: Continuous operation time,
total operation time for each motor * MMP power model only
• Displays setting values for each Report menu - Current / Voltage information check screen
MMP type
• Possible to collectively change the • Possible to check by bar/line/table type,
set value of a specific MMP to an 15 minutes data display, data storage
MMP of the same type • Check load factor, current, voltage*
and power factor * for each MMP
* MMP power model only
11
Smart MCC
Features
½ Unit
1단적 유니트
유니트 ½단적 유니트
1 Unit
12
MCC panel Susol MCC specifications
Description Susol MCC
Rated operating voltage Up to 500V
Main Up to 5000A
Rated current
Distribution Up to 1500A
Phases 3P4W
Rated frequency 50/60Hz
Rated short time withstand current Up to 100kA/1sec
Arc fault containment Up to 100kA/0.3sec
(IEC TR 61641) (85kA/0.5sec)
Rated insulated voltage 750V
Rated impulse withstand voltage 8kV
Degree of protection Up to IP54
Form of internal separation Form 4b
13
Smart MCC
Application
Building (office, commercial, residential, hospital, etc.)
Building
Industry (oil & gas, electronics, steel, semiconductor, cement, glass, etc.)
Industrial
Public facility (gas, water & sewage, airport, railway, port, etc.)
Public
14
Smart MCC
MEMO
15
www.lselectric.co.kr
2020. 04 2018. 10. LS ELECTRIC Co.,Ltd. All rights reserved. / (01) 2020. 04. PACO STORY