Professional Documents
Culture Documents
Flat End With A Full-Face Gasket For A Pair of Openings
Flat End With A Full-Face Gasket For A Pair of Openings
e
value ≥ 0.7C
0.7C
Calculation temperature
T 20 °C
Test temperature
Ttest 20 °C
Calculation pressure
P 1 MPa
Test pressure
C 1500 mm
Arithmetic mean of the diameters of the openings or the mean equivalent diameter of the
nozzles
d 303 mm
k 600 mm
Rp 1.0/ T MPa
Tensile strength
Rm / T 490 MPa
Calculation
Maximum allowed value of the nominal design stress for
normal operating load cases
Rp 0.2/ T Rm /20 315 490
fd = min ( , ) = min ( , ) = 204.2MPa
1.5 2.4 1.5 2.4
k 600
Y 2 = √ = √ = 1.421
k−d 600 − 303
Requirements
d ≤ 0.5 ⋅ C → 303 ≤ 750
Does suit.