Professional Documents
Culture Documents
Lesson 1 Notes Following Diagrams and Instructions
Lesson 1 Notes Following Diagrams and Instructions
Lesson 1 Notes Following Diagrams and Instructions
Turn the seat and backrest over and insert and tighten 3 screws.
Front legs: Use the 2 chair legs that have 2 sets of holes in and insert the two shortest
pieces into the top holes provided. Insert and fasten 2 of the screws but do not tighten
all the way.
Middle support between the legs: Insert cross piece into the 2 lengths that have a hole
in the centre. Insert and fasten 2 of the screws but do not tighten all the way.
Insert cross piece into front legs. Insert and fasten 2 of the screws but do not tighten all
the way.
Insert one of the back legs into chair and then attach front legs with the cross piece.
Insert and fasten 1 of the screws but do not tighten all the way.
Insert the last back leg into chair and cross piece. Insert and fasten 1 of the screws but
do not tighten all the way.
Tap legs firmly into seat. Fasten and tighten 4 screws to secure the seat to the legs.
Turn chair the correct way up. Exert pressure on seat and then tighten the screws which
were not tightened previously.