Professional Documents
Culture Documents
Pipes & Duct Weights
Pipes & Duct Weights
Pipes & Duct Weights
Basic KnowledgeofofSaMontec
SaMontec
Annexure - C
Weights of galvanized ventilation ducts in kg/m without insulation
Sheet metal 0.75 Sheet metal 0.88 Sheet metal 1.0 Sheet metal 1.13 Sheet metal 1.25
200 224 250 280 315 355 400 450 500 560 630 710 800 900 1000 1120 1250 1400 1600 1800 2000 2240 2500 2800 3150 ◂B ▾H
6.6 7.0 7.4 9.3 10.0 10.7 11.6 12.6 13.6 16.7 18.3 20.0 22.0 24.2 26.4 32.8 36.0 39.8 44.7 49.7 54.7 70.2 77.6 86.3 96.3 200
7.4 7.8 9.8 10.4 11.2 12.1 13.0 14.0 17.2 18.8 20.5 22.5 24.7 26.9 33.4 36.6 40.4 45.3 50.3 55.3 70.8 78.3 86.9 97.0 224
8.3 10.3 10.9 11.7 12.6 13.6 14.5 17.8 19.4 21.1 23.1 25.3 27.5 34.1 37.3 41.0 46.0 51.0 55.9 71.6 79.1 87.7 97.8 250
10.8 11.5 12.3 13.2 14.1 15.1 18.5 20.0 21.8 23.8 26.0 28.2 34.8 38.0 41.8 46.7 51.7 56.7 72.5 79.9 88.6 98.6 280
12.2 13.0 13.8 14.8 15.8 19.3 20.8 22.6 24.5 26.7 28.9 35.7 38.9 42.6 47.6 52.6 57.6 73.5 80.9 89.6 99.6 315
13.7 14.6 15.6 16.6 20.1 21.7 23.4 25.4 27.6 29.8 36.7 39.9 43.6 48.6 53.6 58.5 74.6 82.1 90.7 100.8 355
15.5 16.5 17.4 21.1 22.7 24.4 26.4 28.6 30.8 37.8 41.0 44.7 49.7 54.7 59.7 75.9 83.4 92.0 102.1 400
17.4 18.4 22.2 23.8 25.5 27.5 29.7 31.9 39.0 42.3 46.0 51.0 55.9 60.9 77.3 84.8 93.4 103.5 450
19.4 23.3 24.9 26.6 28.6 30.8 33.0 40.3 43.5 47.2 52.2 57.2 62.2 78.8 86.3 94.9 104.9 500
24.6 26.2 27.9 29.9 32.1 34.3 41.8 45.0 48.7 53.7 58.7 63.6 80.5 88.0 96.6 106.7 560
27.6 29.5 31.5 33.7 35.9 43.5 46.7 50.5 55.4 60.4 65.4 82.5 90.0 98.6 108.7 630
31.2 33.2 35.4 37.6 45.5 48.7 52.5 57.4 62.4 67.4 84.4 92.3 100.9 111.0 710
35.2 37.4 39.6 47.7 51.0 54.7 59.7 64.6 69.6 87.4 94.9 103.5 113.6 800
39.6 41.8 50.2 53.4 57.2 62.2 67.1 72.1 90.3 97.8 106.4 116.4 900
44.0 52.7 55.9 59.7 64.6 69.6 74.6 93.2 100.6 109.3 119.3 1000
55.7 58.9 62.6 67.6 72.6 77.6 96.6 104.1 112.7 122.8 1120
62.2 65.9 70.9 75.8 80.8 100.3 107.8 116.4 126.5 1250
69.6 74.6 79.6 84.5 104.7 112.1 120.8 130.8 1400
79.6 84.5 89.5 110.4 117.9 126.5 136.6 1600
89.5 94.5 116.2 123.6 132.3 142.3 1800
99.4 121.9 129.4 138.0 148.1 2000
128.8 136.3 144.9 155.0 2240
143.8 152.4 162.4 2500
161.0 171.1 2800
181.5 3150
The weights in kg/m are reference values. The weights can deviate, depending on the sheet metal thickness and the
type of flange used. The flange weight is included flat-rate. The loads based on a mineral wool weight of 80 kg/m2
and a thickness of 5 cm.
299
BasicKnowledge
Basic Knowledge of
of SaMontec
SaMontec
S 250 GD
Material No. Tensile strength Yield strength Elongation at break A80% min.
DX 51 D
DX 51 D 1.0226 270 – 500 –* ≥ 22
*For fischer profiles defined 240 N/mm²
DC 01
DC 01 1.0330 270 – 410 ≤ 280 ≥ 28
S 235 JR
S 235 JR 1.0037 360 - 510 ≥ 235 19/17
DD 11
L0 = 80mm L0 = 5,65√S0
DD 11 1.0332 440 170 - 360 23 24 28
300