Professional Documents
Culture Documents
LB 6770 Hydraulic Fracturing Density Package
LB 6770 Hydraulic Fracturing Density Package
High responsiveness -
cycle time goes down
to 100ms for high-
Stainless steel housing speed measurements
DASTEC
need to do to set-up the device. 20mCi or less
S.R.L.
Representantes / Distribuidores Exclusivos
Buenos Aires, Argentina
Tel.: (54-11) 5352-2500
E-mail: info@dastecsrl.com.ar
Web: www.dastecsrl.com.ar
18
Months
conditons and we give 18 months warranty from Cable connection Amphenol PT02 E10-6P, 6-wire cable 1.5mm² cross-section, shielded
the time of shipment as a standard for this Housing material Stainless steel ISO 1.4301 / AISI 304 (others upon request)
product. Outer Dimensions Ø 57 mm x 285 mm (Ø 2.24 inches x 11.2 inches)
Weight Approx. 3 kg
The FracSENS LB 6770 directly connects to the Operating temperature -40 … +60°C (-40 … +140°F) ambient temperature
customer control system. A transmitter unit is not Storage temperature -40 ... +70°C (-40 ... +158°F)
needed at all. Customers will receive a signal
Performance
proportional to count rate / density, which could
be either a voltage output, a current output or a Temperature stability ≤ 0.002 %/°C (over 100°C temperature regime)
pulse output - whatever fits your control system. Internal cycle time 100 ms
Even Modbus RTU communication is available.
Signals & Process Interfaces
The densitometer is pre-configured in our Output Signals proportional to count rate or logarithmic count rate (density)
0...10 VDC or
factory according to your needs, so anything you 4...20 mA (max. 400 Ohm loop resistance) or
need to do on site is a quick calibration with pulses, max. 10 V
empty pipe and water to set the system up. Communication RS 485 - Modbus RTU (for detector temperature, actual high voltage
and setting, time constant, detector errors and warnings etc.
That‘s it!
A
16 6
12
22
19
B B
14
7
10 13
11
5 DETAIL A
SCALE 1/3
17
Shield sold seperatly
REVISION BLOCK
003 OAK RIDGE, TENNESSEE 37830, U.S.A.
002
001
A 2-6inch Quick Release Pipe Clamp Assembly A
REV DESCRIPTION DATE APPRVL
UNLESS OTHERWISE NOTED DIMENSIONS IN INCHES DRAWN BY: DATE: RESP ENG: DATE: REFERENCE / USED ON
Chris.Payne 12/26/2012 187680 LB6770 2-6inch Quick Release Pipe Clamp Assembly
DO NOT SCALE THIS DRAWING CHECKED BY: DATE: DESIGN BY: DATE: PROJECT
TOLERANCES ARE
FRACTIONS DECIMALS DRAWING FILE NAME: OLD DRAWING NUMBER: DRAWING NUMBER SIZE
ANGLES FINISH
.X ± .02 IN0282
± 1/64 .XX ± .01 ± 0" 30' DWG ISSUE DATE: SCALE
A
.XXX ± .005 12/26/2012 NONE SHEET 1 OF 1
4 3 2 1
4 3 2 1
PARTS LIST
ITEM QTY PART NUMBER DESCRIPTION
16.000 1 1 187603 Quick Release Pin 18-8 SS
2 12 187101 M16 Lock Washer
3 12 187262 5/8-11 Hex Nut
D 4 1 187608 Polyurethane Bump Stop D
1 5 1 187596 Detector Quick Release
Clamp Top
6 2 187420 Black Pipe Clamp Top
7 4 187601 1/4"-20 4.75" Long HHCS
Grade 8
8 1 187632 8-12inch Quick Release
Pipe Clamp Detector Side
Weldment
9 4 187489 0.25 Lock Washer
Detector Sold Seperately 10 4 187604 1/4"-20 Nut Grade 8
11 1 187633 8-12in Fracturing Clamp
Shield Mounting Plate
12 1 187278 LB 8010 Shield
C C
13 4 187374 .375-16 HHCS 1.75
6 14 4 187388 3/8" Flat Washer
22
21 15 4 187094 M10 Lock Washer
16 4 187261 3/8"-16 Hex Nut
17 4 187333 5/8"-11 All Thread
18 1 187605 10-32 0.625" Long HHCS
5
4 19 1 187606 No 10 Lock Washer 316 SS
8 20 1 187607 10-32 Nut 316 SS
21 4 187679 Detector Mount
22 1 63038-01 LB 6770 FracSens Detector
17
11.140 22.825
B B
REVISION BLOCK
003 OAK RIDGE, TENNESSEE 37830, U.S.A.
002
001
A LB6770 8-12inch Quick Release Pipe Clamp A
REV DESCRIPTION DATE APPRVL
UNLESS OTHERWISE NOTED DIMENSIONS IN INCHES DRAWN BY: DATE: RESP ENG: DATE: REFERENCE / USED ON
Chris.Payne 5/28/2014 187681
DO NOT SCALE THIS DRAWING CHECKED BY: DATE: DESIGN BY: DATE: PROJECT
TOLERANCES ARE
FRACTIONS DECIMALS DRAWING FILE NAME: OLD DRAWING NUMBER: DRAWING NUMBER SIZE
ANGLES FINISH
.X ± .02 IN0287
± 1/64 .XX ± .01 ± 0" 30' DWG ISSUE DATE: SCALE
A
.XXX ± .005 5/28/2014 NONE SHEET 1 OF 1
4 3 2 1
4 3 2 1
Sleevetobeusedforindexing
detectorintocorrectposition
D ontheclamp. D
6.750
.236 .394
C C
1.654
11.619
11.126
P2.875
B P2.244 B
DRAWN
Chris Payne 11/20/2014
CHECKED
C IN0265
SCALE
SHEET 1 OF 1
4 3 2 1
4 3 2 1
PARTS LIST
ITEM QTY PART NUMBER DESCRIPTION
1 1 187683 LB 6770 Adaptor Weldment
2 4 187679 Detector Mount
3 2 187420 Black Pipe Clamp Top
D 4 4 187601 1/4"-20 4.75" Long HHCS D
11.591
1 Grade 8
5 4 187604 1/4"-20 Nut Grade 8
6 4 187489 0.25 Lock Washer
7 1 63038-01 LB 6770 FracSens Detector
8.500 7.000
C C
B B
8.500 6.000
2
5
4
REVISION BLOCK
003 OAK RIDGE, TENNESSEE 37830, U.S.A.
002
ADDED OVERALL DIMENSIONS AND HOLE
001 PATTERN DIMENSIONS 11/23/15 HL LB 6770 Adapter Bracket
A A
REV DESCRIPTION DATE APPRVL
UNLESS OTHERWISE NOTED DIMENSIONS IN INCHES DRAWN BY: DATE: RESP ENG: DATE: REFERENCE / USED ON
Chris.Payne 7/20/2015 187682
DO NOT SCALE THIS DRAWING CHECKED BY: DATE: DESIGN BY: DATE: PROJECT
TOLERANCES ARE
FRACTIONS DECIMALS DRAWING FILE NAME: OLD DRAWING NUMBER: DRAWING NUMBER SIZE
ANGLES FINISH
.X ± .02 IN0273
± 1/64 .XX ± .01 ± 0" 30' DWG ISSUE DATE: SCALE
A
.XXX ± .005 7/20/2015 NONE SHEET 1 OF 1
4 3 2 1
DASTEC S.R.L.
Representantes / Distribuidores Exclusivos
Buenos Aires, Argentina
Tel.: (54-11) 5352-2500
E-mail: info@dastecsrl.com.ar
Web: www.dastecsrl.com.ar
We can help!
Berthold Technologies has a new density detector that is designed specifically for
the fracturing industry. For those of you that have used our systems, this new
detector does not need our evaluation unit to operate. The LB 6770 is a direct
output detector that will go directly to your data acquisition system.
Contact us for more information, we will be heading out soon with detectors in
hand to Arkansas, Oklahoma and to Mid / West Texas!